SARIS Mag Remote Shifter 9703T Instruction Manual

June 6, 2024
SARIS

SARIS logo 9703T
Mag Remote Shifter

SARIS Mag Remote Shifter 9703T - QR

http://qr.w69b.com/g/o84LATZL2

SARIS Mag Remote Shifter 9703T - overview1| SARIS
Mag Remote Shifter 9703T - overview2
---|---

1.1 Preparing Resistance Unit

SARIS Mag Remote Shifter 9703T - fig1

Dial Manual Resistance Knob (j) clockwise so the flat portion of the Semi- Circular Adjuster {h) is nearest the outer casing of the Resis­tance Unit.
1.2 Preparing Remote Shifter

SARIS Mag Remote Shifter 9703T - fig2

Tighten and thread the Barrel Adjuster {a) into the closed position. Press the Shifting Lever (c) on the Remote Shifter completely to the DOWN position.
1.3 Installing Remort Shifter onto Resistance Unit

SARIS Mag Remote Shifter 9703T - fig3

Pull the Shift Cable End (e) out from the Shift Housing End Cap (f). Route the exposed cable clockwise around the Semi-Circular Adjuster (h). Firmly press the Shift Cable End (e) into the Shift Cable End Hole (i) on the Resistance Unit casing. Grasp the Shift Housing End Cap (f) and place the remaining exposed cable into the Shift Cable Slit (g). The Shift Housing End Cap (f) should be seated into the hole on the side of the resistance Unit.
Finally, return the semi-circular adjuster (h) via the resistance knob (j) to the position nearest the non-drive side.
2.1 Bicycle Setup

SARIS Mag Remote Shifter 9703T - fig7

Route the Remote Shifter Cable around the bike and up to the bike’s handlebar.
NOTE : Do not allow Remote Shifter Cable to contact any moving parts of the bike!
Paseel cable de cambio remoto
2.2 Installing Remote Shifter onto Handle Bar

SARIS Mag Remote Shifter 9703T - fig8
Adjust the Nylon Strap {d) to fit snugly around the bike’s handlebar. Flip the Cam Lock {b) up and into the locked position. If the Cam Lock {b) does not secure the Remote Shifter, make further adjustments to the Nylon Strap {d) and re-engage the Cam Lock {b).
2.3 Adjusting Resistance

SARIS Mag Remote Shifter 9703T - fig9

Adjust the resistance on your trainer using the Remote Shifter.
To decrease resistance, lift the Shifting Lever (c) into the upright position. To increase resistance, push the Shifting Lever {c) into the down position.
2.4 Barrel Adjuster

SARIS Mag Remote Shifter 9703T - fig10

Loosen or tighten the tension on the shifting cable by threading the Barrel Adjuster {a) in or out.

SARIS logo Saris Cycling Group
5253 Verona Road
Madison WI 53711
800.783.7257
saris.com
29365A 9/21

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals