SARIS 4640 MHS Ramp Bike Tray Instruction Manual
- June 1, 2024
- SARIS
Table of Contents
4640 MHS Ramp Bike Tray
MHS Duo Ramp Accessory #4698
Assembly Instructions
Compatible with :
MHS Models 4640, 4644
Included Items: Ramp
| Max Bike Weight = 80 LB /36 KG
---|---
Max hitch height 32”
LOADING BIKES
-
a. Loosen knobs on the bottom side of the ramp and extend fully.
b. Tighten knobs.
-
a. Open rear wheel MHS arm and extend below rack.
b. Open Front MHS arm and position between 10 and 11 or 1 and 2.
-
a.Slide ramp attachment bracket on to MHS tray with longer side of clip on the bottom side.
b. Roll bike up ramp tray and onto rack.
c. Secure front wheel arm before removing ramp
- See MHS owner’s manual for steps to secure bicycle.
UNLOADING BIKES
-
a. Loosen knobs on the bottom side of the ramp and extend fully.
b. Tighten knobs. -
a. Open Front MHS arm and rotate below tray.
b. Slide C clip on to MHS tray with longer side of clip on the bottom side. -
Roll bike off rack and down ramp, supporting the weight of the bicycle.
Warning
Use caution when rolling bikes on. Intended use of product requires the
user to control up to 80 lb of weight suspended at up to 32” off the ground.
It is the user’s responsibility to determine if they are physically fit enough
to use this product. User assumes all liability inherent with the use of this
product.
a. Consult your MHS owner’s manual for full bike installation details.
b. Ramp is only compatible with Saris MHS systems using DUO (dual arm) trays.
c. Use ramp only on level ground.
d. Inspect ramp for damage and that fasteners are not loose.
Saris 5253 Verona Road Madison WI 53711
www.saris.com
800.783.7257
custsrv@saris.com
Documents / Resources
|
SARIS 4640 MHS Ramp Bike
Tray
[pdf] Instruction Manual
4640 MHS Ramp Bike Tray, 4640 MHS, Ramp Bike Tray, Bike Tray, Tray
---|---