rg2i M Climate H&T Sensor LoRaWAN User Manual
- June 5, 2024
- RG2i
Table of Contents
M Climate H & T Sensor LoRaWAN
User Manual
Mlimate H &T Sensor LoRaWAN® User manual
Scan the QR Code to access MClimate H&T Sensor LoRaWAN® extended documentation
mclimate.eu/lorawan-resources
Need some help?
For more product information and issues related to it, visit climate.eu
/lorawan-resources
or write us to: lorawan-support@mclimate.eu
00359 800 3 1010 Monday-Friday 09:00 – 18:00
Sofia, Bulgaria Aleksandar Malinov Boulevard 31, Campus X, Building 2, Floor
1, offices 1-2
What’s inside the box?
climate H &T Sensor LoRaWAN®
Technical specifications
Description: LoRaWAN temperature and humidity sensor
Model: MC-HT02 Dimensions: 80 x 80 x 20mm
Weight: 107gr Frequency range: 863÷870MHz LoRaWAN®
Device type: Class A End-device
Power supply: 2xAA batteries 1,5VDC
Sensors: built-in temperature and humidity sensor
Work temperature: 0° to +60° Material: ABS
Environmental conditions, in which the device is intended to operate:
-Indoor using;
-for altitude up to 2000m;
-for an ambient temperature:0° to +60°;
-for a maximum relative humidity of 80% for temperature up to 31°, decreasing linearly to 25% relative humidity at temperature 50°;
-for the environment with a degree of contamination 2 (PD2).
Storage and transportation conditions:
– for an ambient temperature:-40° to +85°;
– for relative humidity 5% to 90% without condensation
Manufacturer
Melissa Climate Jsc
Gen. Gurko 4 street
1000 Sofia, Bulgaria
Compliance with the WEEE Directive
The appliance marked with this symbol should not be disposed of with other
household waste. It must be handed over to the relevant collection point for
the recycling of electrical and electronic equipment.
Safety Instructions
Please read the safety instructions before installing the device! Failure to follow the recommended instructions in this manual may be dangerous or in violation of the law. The manufacturer Melissa Climate Jsc., is not responsible for any loss or damage caused by failure to follow the instructions in the operating manual.
Legal Notices
All information, including but not limited to, features, functionality, and/or
other product specifications are subject to change without notice. climate
retains all rights to review or update its products, software, or
documentation without being required to notify any natural or legal person.
The climate and MClimate logo are trademarks of Melissa Climate Jsc. All other
brands and product names mentioned herein are trademarks of their respective
owners.
EU Declaration of Conformity
This device complies with the essential requirements and other applicable
provisions of the following EU directives:
2014/53/ EN 50491-3:2009
EEU 300 220-1 V3.1.1:2017
EEU 300 220-2 V3.1.1:2017
EN 60950-1:2006+A11:2009 +A1:2010+A12:2011+ 2:2013 + AC:2015
EN 301 489-1 V2.1.1:2017
Compatibility
In order to operate MCllimate H&T Sensor LoRaWAN®, you will need: LoRaWAN®
network Battery
Battery type: 2xAA battery 1,5VDC
Device operating voltage: 2.7 – 3.6VDC
Device parts
|
---|---
Assembled H&T Sensor, top view
LED, Buttons, and behavior
When you press the button, the device indicates the current network status:
1. Device has successfully connected to the network (has received Join
Accept):
a.The LED will blink on (30ms duration) and off (800ms duration) multiple
times to indicate that it’s connected to a network
2. Device is not yet connected to a network:
a. The LED will blink on (800ms duration) and off (800ms duration) multiple
times.
Warning: The button has no other function than to check the connection status. Long-pressing it will NOT reset the device.
Commissioning
1 Open your LoRaWAN® Network provider access panel and add the device using
the supplied Serial Number, DevEUI, AppEUI (JoinEUI) and AppKey.
The data is an example. Do not use.
2 . Continue the Installation with the instructions of your LoRaWAN® Network
provider.’
You can get DevEUI, AppEUI (JoinEUI) & AppKey information from the LoRaWAN®
credentials .csv file we sent you with the fulfillment confirmation.
3. In order to remove the frontal plastic cover, apply pressure on the bottom
and top and bottom sides of the device and gently lift one of the sides.
4 . After inserting the 2xAA 1.5VDC batteries in the device, it will
automatically connect to the network. In order to see whether the device has
connected to the network, please check the LED, Buttons, and behavior.
Installation
We recommend installing the device in an open environment (e.g. not in a
recess) at 1.5m height. Do not install the device near air vents as it will
negatively impact the measurements. Avoid big metal as it will worsen the RF
performance. Use double-sided tape to attach it or remove the frontal plastic
cover and use screws to attach it in a more permanent manner.
We recommend installing the device so that the QR code with the serial number
stays on the bottom-right side of the device in order to ensure good
measurements.
Installation of external temperature sensor (NTC)
MClimate H&T measures ambient temperature and relative humidity using a
digital temperature sensor. The device also supports installing an additional
temperature sensor (NTC) in cases where you want to monitor e.g. pipe surface
temperature.
In case you have purchased an external temperature sensor (NTC), connect it to
the connector as shown in the picture below. You will automatically start
receiving the temperature reading as of the next uplink.
www.mclimate.eu
Designed & Manufactured by MClimate in Europe.
Capter – Transmettre – Analyser
Interfaces pour I’informatique industrielle
ATTENTION – NOUVELLE ADRESSE
Remy GUEDOT
Gsm: +33 (0) 662 80 65 57 guedot@rg2i.fr
Olivier BENAS
Gsm: +33 (0) 666 84 26 26
olivier.benas@rg2i.fr
14 rue Edouard Petit
– F42000 Saint Etienne
– Tel: +33 (0) 477 92 03 56
– Fax: +33 (0) 477 92 03 57
titivate Windows www.rg2i.fr
18 to Settings to activate Windows.