Not mentioned W2412GD-E Series Wall Cabinet Instruction Manual
- June 12, 2024
- Not mentioned
Table of Contents
Not mentioned W2412GD-E Series Wall Cabinet
PRODUCT DESCRIPTION
| PART | DESCRIPTION |
|---|---|
| A1 | Box side panel – left |
| A2 | Box side panel – right |
| B | Box bottom panel |
| C | Box back panel |
| D | Face frame |
| J | Door panel |
| L | Box top panel |
CAUTION
- Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
- The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
- Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
- Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws. Please refer to the actual product for the screw hole position.
HARDWARE CONTENTS
Soft – close hinge x 4
Be careful the length of the screws.
Included:
1/2” Flat Head Phillips Screw x 8
3/4” Round Head Phillips Screw x 4
Corner brace x 14
Included:
1/2” Round Head Phillips Screw x 56
1” Flat head Phillips screw x 6
Rubber bumper x 4
TOOLS REQUIRED (NOT INCLUDED)
INSTALLATION OVERVIEW
Use 1/2” round head Philips screw x 8
Use 1/2” round head phillips screw x 8
Use 1/2” round head Philips screw x 12
Use 1/2” round head Philips screw x 12
1” Flat head Phillips screw x 6
Use 1/2” round head Philips screw x 10
Use 1/2” round head Philips screw x 2
Use 1/2” flat head Philips screw x 4
3/4” Round Head Phillips Screw x 4 Some products may have hinges pre-
installed.
If the door is not level when it is installed, the customer will need to turn
the screw clockwise to extend the hinge or counterclockwise to shorten the
hinge.
GLASSDOOR CUTOUT SPECIFICATIONS
Height Configuration:
Door Height* – (2 x Door Style Rail Width) + 1½”
Width Configuration:
Door Width* – (2 x Door Style Stile Width) + 1½”
| Door Style | Rail Width | Stile Width |
|---|---|---|
| Shaker | 2 ¾” | 2 ¾” |
| Traditional | 3″ | 3″ |
| Cameo | 3″ | 3″ |
*Door height and width information is located in the Specification Manual.
DISCLAIMER: This formula is to be used as an estimation tool only. We recommend that physical measurements are taken prior to ordering your inserts. We cannot guarantee the exact dimensions determined when using the formula provided.
Dear customers,
Thank you for purchasing our product. If you require assistance, please
contact the customer service team at the retailer where you purchased the
product. The customer service team will be happy to assist you.