Leap Frog 80-612100 Colorful-Counting-Red-Panda User Guide
- June 6, 2024
- Leap Frog
Table of Contents
Colorful Counting Red Panda™
Parent’s Guide
This guide contains important information. Please keep it for future
reference. 91-003941-003
INTRODUCTION
Thank you for purchasing the Colorful Counting Red Panda ™! Learning
colors, counting and cuddling have never been so adorable and fun!
Heart Button Music Button Off/Low/High Volume Selector
INCLUDED IN THIS PACKAGE
- Colorful Counting Red Panda™
- Parent’s guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable
tags, cable ties, cords, and packaging screws are not part of this toy and
should be discarded for your child’s safety.
NOTE
Please keep this parent’s guide as it contains important information.
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
- Make sure the unit is turned Off.
- Find the battery cover located on the back of the unit, use a screwdriver to loosen the screw, and then open the battery cover.
- Remove old batteries by pulling up one end of each battery.
- Install 2 new AA (AM-3/LR6) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
- Replace the battery cover and tighten the screw to secure.
WARNING / ATTENTION :
Adult assembly is required for battery installation.
Keep batteries out of reach of children.
IMPORTANT: BATTERY INFORMATION
- Insert batteries with the correct polarity (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not short-circuit the supply terminals.
- Remove batteries during long periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in a fire.
RECHARGEABLE BATTERIES:
- Remove rechargeable batteries from the toy before charging.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not charge non-rechargeable batteries.
NOTE
This product is in Try-Me mode in the packaging. After opening the package,
turn the Colorful Counting Red Panda ™ off and on again to proceed with
normal play. If the unit repeatedly powers down while playing, please install
a new set of batteries.
PRODUCT FEATURES
-
Off/Low/High Volume Selector
Slide the Off/Low/High Volume Selector to turn the toy on and select the Low or High volume.
-
Heart Button
Press to hear counting, colors, cute sayings, and silly phrases.
-
Music Button
Press to hear counting, color songs, and three dance tunes.
-
Automatic Shut-Off
To preserve battery life, the Colorful Counting Red Panda™ will automatically shut off after approximately 30 seconds without input. The unit can be turned on again by pressing any button.
SONG LYRICS
Color Cheer
Red, yellow, green, blue
I love colors how about you?
Color Song
Red, yellow, orange and blue – Green and purple, too!
I’m Gonna Count on You to Cuddle Me
I’m gonna count on you to cuddle me!
Give me a hug (or two or three!)
One!
Two!
Three!
Four!
Huggle me, snuggle me, cuddle me more!
Counting to 10
I love you! Cuddle me and let’s count to 10.
1, 2, 3, 4, 5, 6, 7, 8, 9, 10.
Aw! You are my bestest friend ever!
If You’re Silly and You Know It
Verse 1:
If you are silly and you know it claps your paws!
If you are silly and you know it claps your paws!
If you’re silly and you know it and you really want to show it,
If you are silly and you know it claps your paws!
Verse 2:
If you are silly and you know it panda dance!
If you are silly and you know it panda dance!
If you’re silly and you know it and you really want to show it,
If you are silly and you know it panda dance!
CARE & MAINTENANCE
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from direct heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these steps:
- Turn the unit Off.
- Interrupt the power supply by removing the batteries.
- Let the unit stand for a few minutes, then replace the batteries.
- Turn the unit back On. The unit should now be ready to use again.
- If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It
should revert to normal operation when the interference stops. If not, it may
become necessary to turn the power Off and back On or remove and
reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction
and lose memory, requiring the user to reset the device by removing and
reinstalling the batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department at
1-800-701-5327 in the U.S. or
email support@leapfrog.com. Creating and
developing LeapFrog® products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products.
However, errors sometimes can occur. It is important for you to know that we
stand behind our products and encourage you to contact us with any problems
and/or suggestions you might have. A service representative will be happy to
help you.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6121
Product Name: Colorful Counting Red Panda™
Responsible Party: LeapFrog Enterprises, Inc.
Address:2200 Powell Street, Suite 500 Emeryville, CA 94608.
Emery Website: leapfrog.com
Visit our website for more information about our products,
downloads, resources, and more.
leapfrog.com
Read our complete warranty policy online
atleapfrog.com/warranty
LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2021 LeapFrog Enterprises, Inc.
All rights reserved.
Printed in China.
91-003941-003
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>