DORR SLR-9 Smartphone LED Selfie Ringlight Instruction Manual
- June 6, 2024
- DORR
Table of Contents
DORR SLR-9 Smartphone LED Selfie Ringlight
THANK YOU for choosing this DÖRR quality product.
Please read the instruction manual and safety hints carefully before first
use.
Keep this instruction manual together with the device for future use. If other
people use this device, make this instruction manual available. This
instruction manual is part of the device and must be supplied with the device
in case of sale.
DÖRR is not liable for damages caused by improper use or the failure to
observe the instruction manual and safety hints.
SAFETY HINTS
- Do not look directly into the LED and do not direct the light beam into the eyes of humans or animals. CAUTION: Looking into the light for an extended period may cause an irreversible damage to the retina.
- Only for the illumination for photographic purposes. Not suited for permanent room lightning.
- Protect the device from rain, moisture, direct sunlight, and extreme temperatures.
- Turn off the light after use and disconnect from power source.
- Do not operate or touch the device with wet hands.
- Protect the device against impacts. Do not use the device if it has been dropped. In this case a qualified electrician should inspect the device before you use it again.
- Do not attempt to repair the device by yourself. Risk of electric shock! When service or repair is required, contact qualified service personnel.
- People with physical or cognitive disabilities should use the device with supervision.
- People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum distance of 30 cm, as the device generates magnetic fields.
- This device is not a toy. To prevent accidents and suffocation keep the device, the accessories, and the packing materials away from children and pets.
- Protect the device against dirt. Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Before cleaning make sure to switch off the device and take off from USB power supply!
- Store the device in a dust-free, dry, and cool place.
- If the device is defective or without any further use, dispose of the device according to the Waste Electrical and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.
PRODUCT DESCRIPTION
Versatile Smartphone LED selfie ring light for video tutorials, self-
portraits, beauty videos etc.
The soft light reduces skin imperfections and creates a natural, circle
reflection in the eye.
- 60 LEDs Bi-Color
- 3 light modes: cold light, mixed light, warm light
- Colour temperature 3500-8500 K
- Brightness dimmable
- SOS flashing function
- Built-in Li-Ion battery 3.7 V / 600 mAh
- Supplied with USB charging cable
NOMENCLATURE
- Ring light
- Clamp
- Button –
- On/Off button
- Button +
- Micro USB port
- LED charging indicator
- USB charging cable
8a) Micro USB plug
8b) USB A plug
FIRST STEPS
- Before first use, please fully charge the built-in Li-Ion battery.
- Only charge with the supplied USB charging cable
- Never leave the ring light unattended while charging.
Insert the Micro USB plug (08a) of the USB charging cable (08) into the Micro
USB port (06) of the LED selfie ring light. Connect the USB A plug (08b) to a
USB socket on your computer. The charging process starts, and the LED charging
indicator (07) lights up red. When battery is fully charged, the LED charging
indicator (07) lights up green. Remove the USB cable.
When the battery is totally empty, the charging time by PC is about 1,5 hours.
OPERATION
Switching On/Off, changing the light mode
To switch on the LED selfie ring light, press the On/Off button (04) briefly.
The LED selfie ring light is in light mode mixed light with approx. 4400 K.
For light mode cold light with approx. 8500 K, press the On/Off button (04) a
second time. Press the On/Off button (04) a third time to enter the light mode
warm light with approx. 3500 K. To switch off the ring light, press the on/Off
button (04) a fourth time.
Dimming
The brightness can be dimmed in all 3 light modes:
Press button – (03) to reduce the brightness in 3 steps. Press button + (05)
to increase the brightness in 3 steps.
SOS flashing function
To activate the SOS flashing, first press the On/Off button (04) briefly to
switch on the LED selfie ring light. Then hold the On/Off button (04) pressed
for approx. 2 seconds until the SOS flashing starts.
MOUNTING
CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Before cleaning make sure to switch off the device and take off from USB power supply! Store the device in a dust-free, dry, and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.
TECHNICAL SPECIFICATIONS
| Number of LEDs | 60 LEDs |
|---|---|
| LED power | 2 W |
| Colour temperature min. [Kelvin] | 3500 K |
| Colour temperature max. [Kelvin] | 8500 K |
| Illumination power max. at 1m [Lux] | 80-90 |
| Colour rendering index (CRI) | 95 R a |
| Dimmable | in 3 steps |
| SOS flashing function | ü |
| Power supply | Built-in Lithium-Ion battery 3.7 V/600 mAh |
| Voltage [Volts] | 5V/1A |
| Operating time approx. (with fully charged battery) | 2,5 h |
| Charging time via USB approx. | 1,5 h |
| Length USB cable approx. [cm] | 100 cm |
| Housing | ABS |
| Dimensions approx. [cm] | 9,5 x 12,5 x 3,8 cm |
| Outer diameter approx. [cm] | 9,5 cm |
| Inner diameter approx. [cm] | 5,5 cm |
| Opening clamp | max. 2 cm |
| Weight approx. [g] | 50 g |
Dörr GmbH reserves the right to make technical changes without notice.
SCOPE OF DELIVERY
- 1x Smartphone LED selfie ring light
- 1x USB charging cable
- 1x Safety hints
DISPOSAL, CE MARKING
DISPOSAL OF BATTERIES/ACCUMULATORS
Batteries are marked with the symbol of a crossed-out bin. This symbol
indicates that empty batteries or accumulators which can no longer be charged
should not be disposed of with household waste. Waste batteries may contain
harmful substances that can cause damage to health and to the environment.
Please use the return and collection systems available in your country for the
disposal of the waste batteries.
WEEE INFORMATION
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is
the European community directive on waste electrical and electronic equipment,
which became European law in February 2003. The main purpose of this directive
is to prevent electronic waste. Recycling and other forms of waste recovery
should be encouraged to reduce waste. The symbol (trash can) on the product
and on the packing means that used electrical and electronic products should
not be disposed of with general household waste. It is your responsibility to
dispose of all your electronic or electrical waste at designated collection
points. Disposing of this product correctly will help to save valuable
resources and it is a significant contribution to protect our environment as
well as human health. For more information about the correct disposal of
electrical and electronic equipment, recycling and collection points please
contact your local authorities, waste management companies, your retailer, or
the manufacturer of this device.
ROHS CONFORMITY
This product is compliant with the European RoHS directive for the restriction
of use of certain hazardous substances in electrical and electronic equipment
and its amendments.
CE MARKING
The CE marking complies with the European standards and indicates that the
product meets the requirements of the applicable EU directives.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>