PiXAPRO MOBI LED 22W Table Top LED Light User Manual
- June 3, 2024
- PiXAPRO
Table of Contents
MOBI LED 22W
Table-Top LED Light
User Manual
Overview
-
Vents
-
Fastening screws
-
Telescopic Stand
According to their needs, can adjust the height of the stand -
The external power cord
-
Bracket interlocking profile
-
Power Switch
-
Base Bracket
-
Foldable Base
Product Information
Phantom series LED studio light, The LED light panel is suitable for both
video recording and photography. This medium-sized continuous LED light
source, is portable for outdoor use, and can also be handheld or supported by
a tripod.
The MOBI LED is stylish and portable ultra-thin led light. Quick and easy to
set-up with a user-friendly interface. It features a built-in white diffuser,
which produces a soft-diffused quality of light with amazing brightness.
Excellent CRI of 90+, and Daylight-Balanced to 5600K. This light is Ideal
table-top photography or video with small products.
Model Parameter List
| Model | MOBI LED |
|---|---|
| Output Power | 22W |
| Luminous Flux | 2600LM |
| Color Temperature | 5600K |
| Light Source | 0.2W High Brightness LED |
| Dimmer | （Three dimming）（25%/50%/100%） |
| Power supply | AC100-240V 50/60Hz |
Warning and Notes
-
The MOBI LED is best used in a dry and well-ventilated environment.
-
Please DO NOT expose to rain or moisture, to avoid short-circuit.
-
Please DO NOT use with power-adapters not designed specifically with the MOBI LED.
-
It’s normal the MOBI LED to get a little warm whilst in operation.
-
Please avoid any sudden shocks during transportation and/or installation, as impact damage may cause deformation and damage to the light.
-
Please DO NOT look directly into the light whilst light is on.
-
Please DO NOT place the light near flammable substances, such as alcohol or gasoline or other volatile solvents.
-
Please use the soft dry cloth to clean the light. You can wipe with a cloth with some neutral detergent to remove difficult to remove stains, and then dry with a soft cloth.
-
Keep the light out of reach from children.
-
DO NOT attempt to repair light. If your MOBI LED develops a fault, as doing so will VOID your warranty. Please contact us at customerservice@essentialphoto.co.uk.
-
DO NOT dismantle the head unit unless work is carried out by a qualified technician.
Dismantling your MOBI LED will VOID your warranty. -
ENSURE the device is properly disconnected the power supply when the light is not in use, before mounting or during maintenance
Note: The technical data are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>