DORR 395132 Motor Dolly MD-5 Instruction Manual
- June 4, 2024
- DORR
Table of Contents
DORR 395132 Motor Dolly MD-5
THANK YOU for choosing this DÖRR quality product.
Please read the instruction manual and safety hints carefully before first use. Keep this instruction manual together with the device for future use. If other people use this device, make this instruction manual available. This instruction manual is part of the device and must be supplied with the device in case of sale.
DÖRR is not liable for damages caused by improper use or the failure to observe the instruction manual and safety hints.
SAFETY HINTS
- Protect the device from rain, moisture, direct sunlight and extreme temperatures.
- Do not operate or touch the device with wet hands.
- Respect the maximum loading capacity of 4kg.
- Protect the device against impacts. Do not use the device if it has been dropped. In this case a qualified electrician should inspect the device before you use it again.
- Do not attempt to repair the device by yourself. Risk of electric shock! When service or repair is required, contact qualified service personnel.
- People with physical or cognitive disabilities should use the device with supervision.
- People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum distance of 30 cm, as the device generates magnetic fields.
- Do not use the device nearby mobile phones and devices that generate strong electromagnetic fields (e.g. electric engines).
- This device is not a toy. To prevent accidents and suffocation keep the device, the accessories and the packing materials away from children and pets.
- Protect the device against dirt. Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Make sure to take off the device from power before cleaning!
- Store the device in a dust-free, dry and cool place.
- If the device is defective or without any further use, dispose of the device according to the Waste Electrical and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.
PRODUCT DESCRIPTION
- Motor Dolly with 3 rubberized wheels
- 5 speeds, as well as forward and reverse gear for soft and even tracking shots
- Built-in, long-life Li-Ion battery – charging via the supplied USB charging cable.
NOMENCLATURE
- Camera screw with ¼” connection thread
- Locking screw
- ¼” female thread
- ⅜” female thread
- Micro USB Port
- LED indicator
- On/Off button
- Forward/Reverse
- Speed up
- Speed down
- Front wheel
- Curve angle scale
- Rear wheel
- Motor drive wheel
CHARGING THE MOTOR DOLLY/LED INDICATOR
ATTENTION
Before first charging, unscrew the motor drive wheel (14) to remove the protective plate between battery and battery contact.
To charge the motor dolly plug the micro USB connector of the USB charging cable into the Micro USB port (5) and connect the motor dolly to your PC. While charging, the LED indicator (6) lights up red. After the motor dolly is fully charged, the LED indicator (6) will turn off. If the remaining energy is low, the LED indicator (6) flashes red.
MOUNTING THE CAMERA
Screw your camera onto the 1/4″ female thread (1) and tighten the locking screw (2) upwards.
ADJUSTING THE CURVE ANGLE
To make the motor dolly move in a circle, set the front wheel (11) to the desired curve angle (12).
TRACKING SHOTS
To start the tracking shot press the On/Off button (7). To move forward or backward press the button (8). For higher speed press the plus button (9). For lower speed press the minus button (10).
CAUTION
- Do not hold or rotate the motor drive wheel (14) manually during operation. This may cause damage to the motor.
- Only operate the motor dolly on flat surfaces/undergrounds.
- Take care that the motor dolly does not drop down while moving.
CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Make sure to take off the device from power before cleaning! Store the device in a dust-free, dry and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.
TECHNICAL SPECIFICATIONS
| Built-in battery | Li-Ion 14430 3,7 V 650 mAh |
|---|---|
| Operation time | With max. loading 1 hour with fully charged battery |
| Speeds | **Gear 1: 4 mm/Sec |
Gear 2: 7 mm/Sec
Gear 3: 11 mm/SeC
Gear 4: 17 mm/Sec
Gear 5: 24 mm/Sec
Max. loading capacity| 4 kg
Connections| 2x ¼” female thread / 2x ⅜” female thread
Camera connection| ¼” screw thread
Materia| Aluminum/plastic
Dimensions| approx. 145 x 120 x 60 mm
Weight| approx. 245 g**
DISPOSAL, CE MARKING
DISPOSAL OF BATTERIES/ACCUMULATORS
Batteries are marked with the symbol of a crossed out bin. This symbol indicates that empty batteries or accumulators which can no longer be charged should not be disposed of with household waste. Waste batteries may contain harmful substances that can cause damage to health and to the environment. Please use the return and collection systems available in your country for the disposal of the waste batteries.
WEEE INFORMATION
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is the European community directive on waste electrical and electronicequipment, which became European law in February 2003. The main purpose of this directive is to prevent electronic waste. Recycling and other forms of waste recovery should be encouraged to reduce waste. The symbol (trash can) on the product and on the packing means that used electrical and electronic products should not be disposed of with general household waste. It is your responsibility to dispose of all your electronic or electrical waste at designated collection points. Disposing of this product correctly will help to save valuable resources and it is a significant contribution to protect our environment as well as human health. For more information about the correct disposal of electrical and electronic equipment, recycling and collection points please contact your local authorities, waste management companies, your retailer or the manufacturer of this device.
ROHS CONFORMITY
This product is compliant with the European directive 2011/65/EU of June 08, 2011 for the restriction of use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
CE MARKING
The CE marking complies with the European directives.
DÖRR GmbH · Messerschmittstr. 1 · D-89231 Neu-Ulm Fon: +49 731 97037-0 · Fax: +49 731 97037-37 · info@doerrfoto.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>