DORR SL-480 SET LED STUDIO RING LIGHT WITH LIGHT STAND Instruction Manual
- June 5, 2024
- DORR
Table of Contents
DORR SL-480 SET LED STUDIO RING LIGHT WITH LIGHT STAND Instruction
INSTRUCTION MANUAL
THANK YOU for choosing this DÖRR quality product.
Please read the instruction manual and safety hints carefully before first
use.
Keep this instruction manual together with the device for future use. If other
people use this device, make this instruction manual available. This
instruction manual is part of the device and must be supplied with the device
in case of sale.
DÖRR is not liable for damages caused by improper use or the failure to
observe the instruction manual and safety hints.
In the event of damage caused by improper handling or by external influence,
the guarantee or warranty becomes void. Manipulation, structural alteration of
the product, as well as opening the housing by the user or unauthorized third
parties, is considered improper handling.
SAFETY HINTS
- Do not look directly into the LED and do not direct the light beam into the eyes of humans or animals. CAUTION: Looking into the light for an extended period of time may cause an irreversible damage to the retina.
- Do not operate or touch the device with wet hands.
- Only for the illumination for photographic purposes. Not suited for permanent room lightning.
- Keep away from flammable materials.
- Ensure sufficient ventilation during operation. Never cover the ventilation slots.
- Make sure to use the device with appropriate, high-quality Li-Ion batteries type Sony NP-F750 or NP-F970 (batteries optionally available).
- Make sure to turn off the device at main switch before disconnecting from power or removing the batteries.
- Only operate with the supplied power cable. Do not use an extension cord. Take care that nobody stumbles over the cable connections.
- To avoid tilting of the LED light, align the light over a widely spread tripod leg. Make sure that the tripod stands on an even and dry ground (light stand optionally
- ailable).
- Cool down the LED light before making any installations or before you store it in the bag.
- Protect the device from rain, moisture, direct sunlight and extreme temperatures.
- Protect the device against impacts. Do not use the device if it has been dropped. In this case a qualified electrician should inspect the device before you use it again.
- Do not attempt to repair the device by yourself. Risk of electric shock! When service or repair is required, contact qualified service personnel.
- People with physical or cognitive disabilities should use the device with supervision.
- People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum distance of 30 cm, as the device generates magnetic fields.
- Do not use the device nearby devices that generate strong electromagnetic fields.
- After use turn of the device at the main switch and disconnect from power source.
- This device is not a toy. To prevent accidents and suffocation keep the device, the accessories and the packing materials away from children and pets.
- Protect the device against dirt. Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Turn off the device and remove battery or disconnect from power source before cleaning.
- Store the device in a dust-free, dry and cool place.
- If the device is defective or without any further use, dispose of the device according to the Waste Electrical and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.
SAFETY HINTS FOR RECHARGEABLE BATTERIES
Only use high-quality batteries of popular brands. When inserting the battery please respect the correct polarity (+/-). Please remove battery when device is not in use for a long period of time. Do not throw the batteries into fire, do not short-circuit and do not disassemble them. Never charge non- rechargeable batteries – risk of explosion! Remove leaking batteries from the device immediately. Risk of battery acid burn! Clean the contacts before inserting fresh batteries. In case of contact with battery acid, rinse the affected area immediately with water and contact a doctor. Batteries can be dangerous to life if swallowed. Keep batteries away from small children and pets. Do not dispose of batteries in household waste (see also capture “Disposal of Batteries/Accumulators”).
PRODUCT DESCRIPTION
- Versatile LED light source for photo and video shootings
- The soft and even light reduces skin imperfections and creates a natural, circle round reflection in the eye
- Stepless control of colour temperature and light power
- Adjustable from the front – ideal for self-portraits or beauty videos
- 2 universal hot shoe mounts
- Light stand mount with tilt function (light stand optional)
- Battery operation possible (batteries optional)
- Supplied with light stand, mirror, smartphone holder with gooseneck, mini ball head, power supply and bag
NOMENCLATURE
- Universal hot shoe mounts
- Front control knob
- Locking screw (tilt angle)
- Bracket for light stand
- 04a) Locking screw
- Battery slots
- Battery contact pins
- Socket for power adapter
- LED display for colour temperature
- LED display for brightness Control knob
- Main switch
- Power adapter
- Socket for power cable 12b) Power cable
- Connection plug
- Ball head
- Locking screw
- Flash shoe
- Smartphone holder
- Locking screw
- Flash shoe
- Mirror
- Locking screw
- Flash shoe
- Light stand
- Spigot
FIRST STEPS
-
CAUTION
Before connecting or disconnecting cable connections, make sure that the main switch (11) is on position O = Off.
Insert the connection plug (12c) into the socket (07) at the ring light. Plug the power cable (12b) into the power cable socket (12a) and connect the power supply to a socket outlet.
Switch on the LED light at the main switch (11): position I = On. -
CAUTION
After each use please turn off the ring light (main switch 11 = position O = Off).
OPERATION WITH RECHARGEABLE BATTERIES
Alternatively, the SL-480 ring light can be operated with 2 pcs Li-Ion batteries (Replace-) Sony NP-F750 or NP-F970 (optionally available from DÖRR).
-
CAUTION:
Before inserting or removing the Li-Ion batteries, make sure that the ring light is turned off (main switch (11) to position O = Off).
Insert the Li-Ion batteries into the battery slots (05) with the battery contacts facing to the battery contact pins (06). Slide the battery fully forward until it touches the battery contact pins (06).
Turn on the ring light at the main switch (11): position I = On. -
NOTE:
Please remove the batteries when ring light is not in use for a long period of time.
To remove the Li-Ion batteries, slide the batteries backwards and remove them out of the battery slots.
OPERATION
Turn on the ring light at the main switch (11): position I = On.
Press the control knob (10) briefly. The LED display for colour temperature
(08) is flashing. Turn the control knob (10) to select the desired colour
temperature from 3200K to 5500K.
Press the control (10) to confirm your selection and to enter the setting for
brightness from 0 – 99% (corresponds to 100% brightness).
Alternatively, the settings as described above can be made also with the front
control knob (2).
CAUTION:
After each use please turn off the ring light (main switch 11 = position O =
Off).
MOUNTING AND EXAMPLES FOR APPLICATION
Mounting on the light stand
Mount the ring light on the light stand (16) by placing the bracket (04) onto
the spigot (16a). Tighten the locking screw (04a).
CAUTION
To avoid tilting of the ring light, align the ring light over a widely spread
tripod leg. Make sure that the light stand stands on an even and dry ground.
Loosen the locking screw for the tilt function (03) and set the desired
illumination angle.
Examples for application
To mount the ball head (13), the smartphone holder (14) or the mirror, slide
the respective flash shoe (13b, 14b, or 15b) in one of the universal hot shoe
mounts (1) at the ring light. Screw down the locking screws (13, 14a or
15a).
CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Turn off the device and disconnect from power source or remove batteries before cleaning. Store the device in a dust-free, dry and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.
TECHNICAL SPECIFICATIONS
LED RING LIGHT|
---|---
Number of LEDs| 480
Light intensity| max. 1000 Lux/1m
Colour temperature| 3200 – 5500 K
Colour Rendering Index CRI| 95 Ra
Power| 65W
Outer diameter approx.| 45 cm
Inner diameter approx.| 30 cm
Energy source| AC 100-240V ~ 50/60Hz 2,5A max.
| Alternatively: 2x Li-Ion Batteries (replace-) Sony NP-F750 or NP-F970
(optional)
Housing| Sturdy plastic housing
Weight approx.| 1380 g
LIGHT STAND
|
Height max. approx.| 180 cm
Height min. approx.| 51 cm
Transport height approx.| 50,5 cm
Max. load capacity approx.| 4 kg
Weight approx.| 1078 g
Dörr GmbH reserves the right to make technical changes without notice.
SCOPE OF DELIVERY
-
1x SL-480 ring light
-
1x Light stand
-
1x Power adapter
-
1x Power cable
-
1x Mini ball head
-
1x Smartphone holder with goose neck 1x Mirror
-
1x Bag
-
1x Safety hints
DISPOSAL, CE MARKING
DISPOSAL OF BATTERIES/ACCUMULATORS
Batteries are marked with the symbol of a crossed-out bin. This symbol indicates that empty batteries or accumulators which can no longer be charged should not be disposed of with household waste. Waste batteries may contain harmful substances that can cause damage to health and to the environment. Please use the return and collection systems available in your country for the disposal of the waste batteries.
WEEE INFORMATION
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is the European community directive on waste electrical and electronic equipment, which became European law in February 2003. The main purpose of this directive is to prevent electronic waste. Recycling and other forms of waste recovery should be encouraged to reduce waste. The symbol (trash can) on the product and on the packing means that used electrical and electronic products should not be disposed of with general household waste. It is your responsibility to dispose of all your electronic or electrical waste at designated collection points. Disposing of this product correctly will help to save valuable resources and it is a significant contribution to protect our environment as well as human health. For more information about the correct disposal of electrical and electronic equipment, recycling and collection points please contact your local authorities, waste management companies, your retailer or the manufacturer of this device.
ROHS CONFORMITY
This product is compliant with the European RoHS directive for the restriction
of use of certain hazardous substances in electrical and electronic equipment
and its amendments.
CE MARKING
The CE marking complies with the European standards and indicates that the
product meets the requirements of the applicable EU directives.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>