DORR 373653 Elevating System Instruction Manual

: May 15, 2024
: DORR

Table of Contents

DORR 373653 Elevating System Instruction Manual
Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DORR 373653 Elevating System Instruction Manual

Assembly instruction
ELEVATING SYSTEM
FOR 3 PAPER BACKGROUND ROLLS
FOR 4 PAPER BACKGROUND ROLLS

Elevating System

NOMENCLATURE

Nomenclature

THANK YOU for choosing this DÖRR quality product.

Please read the assembly instructions carefully before first use. Keep the assembly instructions together with the device for reference. If other people use this device, provide them with these instructions. If you sell the unit, this assembly instruction forms an integral part of the device and must be supplied with it.

DÖRR is not liable for damage caused by improper use or failure to observe the assembly instructions.

In the event of damage caused by improper handling or by external influence, the guarantee or warranty claim becomes void. Any manipulation, structural modification of the product or opening of the housing by the user or an unauthorised third party shall be considered improper handling.

PRODUCT DESCRIPTION

Elevating System for up to 3 paper background rolls or up to 4 paper background rolls – easily roll up and down your paper backgrounds
Suitable for all backgrounds of a maximum width of 2,75 m with a cardboard role of a diameter of approx. 4,5 to 6 cm
Well suited for both wall and ceiling application

CAUTION We recommend the assembly with help of a second person.

NOMENCLATURE

Elevating System for 3 paper rolls
Item no. 373653

Expander with gearwheel (3 pcs)
1a) Guide slot for ceiling/wall mount
1b) Locking screw
1c) Gearwheel
1d) Chain guide bracket
Expander (3 pcs)
2a) Guide slot with friction screw
2b) Locking screw
Ceiling/wall mount (2pcs)
3a) Holes for heavy-duty dowels
3b) Heavy-duty dowel for concrete (4 pcs)
Plastic chain to roll up and down backgrounds (3 pcs)
Weights (3 pcs)

Elevating System for 4 paper rolls
Item no. 373654

Expander with gearwheel (4 pcs)
1a) Guide slot for ceiling/wall mount
1b) Locking screw
1c) Gearwheel
1d) Chain guide bracket
Expander (4 pcs)
2a) Guide slot with friction screw
2b) Locking screw
Ceiling/wall mount (2pcs)
3a) Holes for heavy-duty dowels
3b) Heavy-duty dowel for concrete (4 pcs)
Plastic chain to roll up and down backgrounds (4 pcs)
Weights (4 pcs)

ASSEMBLY

Screw the two ceiling/wall brackets (2) to the wall or ceiling with the appropriate distance. The distance results from the width of the paper backgrounds. Use the ceiling/wall mounts (3) as drilling template. The supplied 4 pcs heavy-duty dowels (3b) are only suitable for concrete underground. For other surfaces please use suitable dowels/screws. We recommend min. 2 dowels/screws per ceilina/wall mount (3).

Slide the expanders (1+2) into paper rolls and hang the paper rolls into the hooks of the ceiling/wall mount (3). Mind the guide slots (1a+2a) slide safely into the hooks. The gearwheel expanders should be situated either all on the right or on the left side. Turn the large plastic screw (1b+2b) at the expanders clockwise to open the expander and to fix the paper rolls.
Before closing the plastic chain (4) mount the weight (5) (see picture).
Tighten the friction screw (2a) to prevent the paper background from unwinding through its own weight.

Assembly