Amewi 2586433 Helikopter RtF AC Group Webshop Instruction Manual

: June 7, 2024
: AMEWi

Amewi 2586433 Helikopter RtF AC Group Webshop

Product Information

Specifications:

Product Name: LAMA V2 SINGLE-ROTOR
Model Number: 25318
Manufacturer: AMEWI
Remote-Controlled
Operating Frequency: 2.405-2.475MHz
Maximum Transmitting Power: 18dBm
Battery Requirements: Six 1.5V AA batteries for remote control, 7.4V Li-Po battery for the model (included)

Product Usage Instructions

Safety and Hazard Warnings:
Ensure the following safety precautions are observed:

This product is not a toy and is not suitable for children under 14 years.
Avoid contact with drive parts and moving components to prevent injury.
Allow the motor to cool for 10-15 minutes after use to avoid burn injuries.

Battery Notice & Disposal:
Properly handle batteries as per the following guidelines:

Recycle batteries with the recycling symbol; do not dispose of them in local household garbage.
For battery disposal, refer to local regulations and recycling facilities.

Important Notes:
Key points to consider for safe operation:

Operate the model in clear visibility to prevent signal interference.
Avoid using the model in adverse weather conditions like rain, snow, or thunderstorms.
Do not operate the model near water bodies or in crowded areas.

FAQ

Is the LAMA V2 suitable for children?

No, this remote-controlled model is not a toy and is not suitable for children under 14 years old due to small parts and safety considerations.

What batteries are required for the LAMA V2?

The remote control requires six 1.5V AA batteries, while the model itself uses a 7.4V Li-Po battery which is included.

Can I dispose of the batteries in local household garbage?

No, batteries labelled with the recycling symbol should be recycled and not disposed of in local household garbage. Please use designated battery recycling facilities.

Welcome to AMEWI
The Amewi Trade GmbH is an international import- and wholesale company for R/C models, toys and creative items, located in Borchen near Paderborn, Germany. Our product range includes over 10,000 items. Above all, this includes remote- controlled cars, helicopters, boats, and tank models as well as a wide range of accessories and all necessary spare parts. Our sales network includes over 700 specialist dealer and online retailers across Europe.
The company AMEWI Trade GmbH is a pure wholesale company. We only sell our products to retailers. When you purchase AMEWI products as an end consumer, you are entering into a contract with the retailer. Please always contact your dealer in warranty cases.

AMEWI Trade GmbH Nikolaus-Otto-Str. 18 33178 Borchen Germany
Servicezeiten: Dienstag 9:30 – 12:00 Uhr | Donnerstag 14:00 – 16:30 Uhr
Telefon: +49 180 5009821 (Festnetz 14Ct/Min., Mobil max. 42Ct/Min.)
Support: https://amewi.com.

ECLARATION OF CONFORMITY

This product has been manufactured according to actual technical standards. The product matches the requirements of the existing European and national guidelines. The Declaration of Conformity has been proofed. AMEWI Trade GmbH declares that this product matches the basic requirements and remaining regulations of the guideline 2014/53/EU (RED). The declarations and documents are stored at the manufacturer and can be requested and applied there. https://amewi.com/Konformitaetserklaerungen For additional questions about the product and conformity please contact Amewi Trade GmbH Nikolaus-Otto-Str. 18, 33178 Borchen Germany or website https://amewi.com.

SECURITY AND HAZARD WARNINGS

For damage, caused by disregarding the manual, the warranty expires.
We are not liable for secondary failures, material, or personal damage, caused by improper usage or disregarding the security notices.
Based on security and registration (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.
Small parts. Danger of suffocation or risk of injury caused by small parts.
Suitable for people aged 14+!
The product is not allowed to get moist or wet. The product is only allowed to be used on flat and clean surfaces. Even a drop-down from a small height can cause damage to the product.

BATTERY NOTICE & DISPOSAL

Batteries/rechargeable batteries do not belong in the hands of children.
Batteries or rechargeable batteries may only be changed by an adult. Never mix rechargeable batteries with dry batteries. Never mix full batteries with half-empty batteries. Never mix rechargeable batteries of different capacities. Never attempt to charge dry batteries. Ensure correct polarity. Defective rechargeable batteries/batteries must be disposed of properly (hazardous waste). Never carry out the charging process unsupervised. If you have any questions about the charging time, read the operating instructions or contact the manufacturer.
Read the safety instructions and warnings before using or charging the Li-ion battery.
Stop using or charging immediately if the battery is leaking, has a temperature of over 70° C or anything else unusual occurs. Always charge and store batteries on a fireproof surface or in a fireproof LiPo bag.
Only use a qualified and specific Li-Po/Li-Ion charger for Li-Po/Li-Ion batteries or NiMH charger for NiMH batteries. Never charge the battery unattended. Do not charge the battery if the charging process exceeds 4.2 V/cell. Do not charge the battery with a charging current above 2C. Please check and ensure that you are using a qualified charger. An unqualified charger may cause a fire. Do not discharge the battery with a current that exceeds the maximum discharge current. Otherwise, this will cause the battery to overheat. This can lead to bursting, fire or explosion.
Never disassemble puncture, knock, drop, short-circuit and/or throw the battery into a fire.
Improper use such as short-circuiting or overcharging can lead to explosions or fire.
Store the battery in a safe place where infants or children cannot reach it.
The above indicates the danger of using the battery. The user assumes full responsibility for the result of using the battery. Please be sure to observe our safety instructions which you can find online at
https://amewi.com/downloads/manuals/Akku-Sicherheitshinweise.pdf.

DISPOSAL

AMEWI is registered below the Bat-Reg.-No. DE 77735153 and WEEE-Reg.-No. 93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronic products are not allowed to be put in household garbage. Please dispose of the product at the end of the lifetime according to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal of household garbage is forbidden! Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage.
Additional notations for the critical heavy metal are Cd=Cadmium, Hg=Quicksilver, Pb=lead {Label is placed on the batteries, for example below the bottom left trash symbols).
Based on RoHS labelling the manufacturer confirms, that all limit values were taken care of at the time of manufacturing.
Batteries labelled with the recycling symbol can be put into a used battery collecting tank. (Most supermarkets have) They are not allowed to be put into local household garbage.
AMEWI Trade GmbH is involved in the dual system for boxing over the company Landbell AG. All used boxes are collected from partner companies (waste disposal contractors) at private customers (local households), sorted and properly utilized. The involvement in Dual Systems helps to save C02 Emissions.

THANK YOU
Thank you for purchasing the Amewi Lama V2 helicopter. Please read the instruction manual carefully and keep it for future reference.

WARNING

This remote-controlled model is not a toy. It consists of many small parts and is not suitable for children under 14 years.
Six 1.5V AA batteries are required for the remote control.
A 7,4V Li-Po battery is used for the model (included).
Always keep your fingers away from the drive parts and other moving parts to avoid injury.
The model’s motor gets very hot. To avoid burn injuries, allow the motor to cool for 10-15 minutes after use before touching it.

ON INAPPROPRIATE USE OF THE PRODUCT
Please do not disassemble or modify the model in any way. Do not use this product improperly or illegally and do not operate it in a manner that could endanger others or yourself.

MAXIMUM TRANSMITTING POWER DATA

Operation Frequency:	2.405-2.475MHz
Maximum Radio Frequency power: Maximum peak power	18dBm

IMPORTANT NOTES

Note:
This product is manufactured according to strict performance guidelines and complies with safety standards and requirements. This product is not suitable for children under 14 years of age. The manufacturer is not liable for any injury or accident caused by using abnormal parts, excessive wear and tear, improper assembly, or operation. Please operate this product safely and responsibly.

PRECAUTIONS

Please read the following safety information before using the model.
Please do not use the model in rain, snow, or thunderstorms. If liquid enters the electronics, they may be irreparably damaged.
Please do not use the model in an environment that you cannot see.
Signal interference can cause the model to go out of control. Please do not use the model in the following places:

Near a radio tower, mobile phone masts or other places with active radio waves.

|

Near crowds or in public places.

|

Near rivers, ponds or lakes.

|

Near electricity pylons or other transmission towers.

---|---|---|---

Please do not operate the model if you are tired or unwell, have drunk alcohol or have taken drugs – this may cause injury to yourself or others.
To avoid burns, never touch drive parts and motors during or immediately after use as they can be very hot.
Incorrect operation of the transmitter can cause injury to you or others. Be sure to familiarize yourself with the operation before using the model.
Check the model and the remote control before use. Check the screws to make sure they are tight.
When you have finished using the model, always switch off the model first and then the remote control. Otherwise, the model may get out of control.
If the model gets out of range, it may get out of control. Please always stay close to the model with the transmitter.

IMPORTANT NOTES

Be sure to read thoroughly the manual before you begin.
As the product contains small parts, keep it away from small children.
Never reverse the connection/disassemble the battery.
Do not operate the model on public roads or crowded places.

BOX CONTENT

Helicopter Lama V2
Remote Control
Li-Po Battery
USB charging cable
Phillips screwdriver
Main & Tail Rotor
Manual

SPECIFICATIONS

Fuselage length:	425mm
Height:	170mm
Weight:	320g
Rotor diameter:	400mm
Tail rotor diameter:	128mm
Flying time:	ca. 8 Min.
Battery capacity:	840mAh
Charging time:	100 Min.

THE REMOTE CONTROL

INSERT BATTERIES

Modes

MODE 2

MODE 1

CHARGING BATTERY

Charging the battery on a USB port on a laptop, PC, mobile phone charger or power bank.

Connect the USB charging cable to a free USB port
Connect the battery to the charging cable via the white balancer plug. If the red LED lights up, this means that the battery is charging. If the red LED goes out, the charging process is complete.

Alternatively, you can also use a smartphone mains adapter or a power bank for charging. In both cases, proceed as described above.

PREPERATION
Before you start flying, please go through the following points.

Ensure that the helicopter battery is charged and the batteries in the transmitter are full.
Do not fly near people, traffic, ponds, pools, or power lines.
Do not overtighten the screws of the main rotor, the rotor blades must be able to swing freely.

Please note that if you press the emergency stop buttons, the helicopter motor will switch off. If it is too high up, it can be severely damaged on impact.

OPERATION

If you are not yet familiar with the controls, take a moment to familiarise yourself with them. The functions are explained below using Mode 2.

THROTTLE

TURN

FORWARD/BACKWARD

SIDE FLY

FLYING

Switch on the remote control.
Connect the battery to the controller in the model.
The LEDs on the helicopter and on the remote-control flash. Press the throttle stick up and down quickly once. A beep sounds and the LEDs light up continuously. This means that the connection has been established.
Press the throttle lever down to the left and the right stick down to the right to release the helicopter. Alternatively, you can start the helicopter using the auto-start button on the remote control.
Keep the helicopter head pointed straight ahead and keep sufficient distance from yourself and objects.
When you land the helicopter, press the throttle stick down for two to three seconds until the propellers stop turning. Alternatively, you can let the helicopter land automatically using the auto-landing function.

TRIM

Use the trim buttons if the helicopter drifts in one direction. If you are unhappy with the hovering or the helicopter is yawing, please follow the appropriate steps to adjust.
Lift off with the throttle stick. Press the trim button in the opposite direction to the yaw direction until the helicopter hovers smoothly.

GYRO CALIBRATION

If the helicopter yaws very strongly, land it and calibrate the gyro.
To calibrate the gyro, the helicopter must be on level ground.
The indicator light on the helicopter flashes during the calibration process. As soon as the LED lights up constantly, the calibration is complete.

UNLOCK/LOCK
Once the connection has been established, press the two levers down/out for one second to release the helicopter. Press the throttle lever forward, the helicopter will take off and hover at a height of approx. one metre.

ONE-KEY START/LANDING
Press the button at the top right and the helicopter will take off and hover at a height of approx. one metre. To land the helicopter, press the button again and the helicopter will slowly descend to the ground and stop the engines.

EMERGENCY STOP
If the helicopter should get out of control, press the two upper, outer buttons simultaneously. The motors will stop immediately. Please bear in mind that if the helicopter is at too high an altitude, it will be damaged in a crash. NEVER USE THE EMERGENCY STOP FUNCTION IN NON-HAZARDOUS SITUATIONS.

MODE SWITCH
To change the mode of the remote control from Mode 2 to Mode 1 and vice versa, press the left trim button forward and switch on the remote control at the same time.

TROUBLESHOOTING

Problem| Possible Cause|

SOLUTION

---|---|---
Connect the battery to a helicopter, and then the signal light keeps flashing and without response when operating.| The helicopter is not bound to the transmitter.| Bind the transmitter again.
The helicopter does not respond when the battery is connected.| Battery empty, The battery is not connected correctly.| Check the battery voltage. Charge the battery.

Plug in the battery.

The throttle is pushed upwards but the motor does not react, the indicator light on the transmitter flashes.| The battery is empty, the battery has no connection.| Check the battery voltage. Charge the battery.
Plug in the battery.
The engine starts but the helicopter does not take off.| The battery is empty, the main gear or rotor shaft is loose.| Charge the battery
Check the motor shaft and the main gear on its fixed seat.

The helicopter vibrates very strongly

| The rotors are screwed too tightly. The rotor shaft is bent.

The tail rotor is deformed.

| Loosen the screws on the rotor blades slightly.

Replace the crooked wave. Replace the rear rotor.

---|---|---
The helicopter turns left when it takes off.| The rear engine has too little power The rear rotor is not fixed.

Rear engine is defective

| Check the rear engine and rear rotor on a fixed seat.

Replace the rear engine or the rear rotor.

The helicopter is drifting in one direction.| The helicopter is too close to the ground. Trim was not performed.| Bring the helicopter to a height of one meter Run out the trim as described in the manual.
The helicopter drifts off strongly and cannot be corrected by the trim.| Servo defective| Replace defective servos.

amewi.com