CREATIVE SB1820 Sound Blaster X5 USB Host Audio Streamer User Guide

: June 3, 2024
: Creative

CREATIVE SB1820 Sound Blaster X5 USB Host Audio Streamer

CREATIVE-SB1820-Sound-Blaster-X5-USB-Host-Audio-Streamer-
product

OVERVIEW

Power Button (w/ LED)
Press to power ON / OFF
Bluetooth Button (w/ LED)
Long Press 2 sec to go into pairing mode
Press once to reconnect to last connected Bluetooth device
Press 5 Secs to reset
Display Button
Press to Toggle through different information on playback
Press for 2 second to cycle through brightness level.
LED Display (8 Digit 14 Segment)
Volume Knob (w/ LED)
When master volume is muted, either from desktop/ mobile or turning the knob physically, the knob LED will be Blinking White.
Microphone Mute Button (w/ LED)
Press to mute and unmute microphone
Microphone Gain Knob
Headphone Gain Switch
Toggles between normal or high gain mode
Headphone /Speaker Button
Press to toggle between headphone or speaker mode
Direct/DSP Button
Press to toggle between direct audio or DSP mode.
EQ Button
Press to cycle between EQ presets
PC/Console Switch
Toggle between PC and Console usage scenarios / setting
Microphone In Jack
Headphone Out (Unbalanced) Jack
Headphone Out (Balanced) Jack
Note: The headphone (balanced) output will always have higher priority than the headphone (unbalanced) output. Both of headphone outputs are mutually exclusive. Hence, if the headphone (balanced) jack is plugged in,the headphone (unbalanced) jack will be muted. If not, the audio will always output from the headphone (unbalanced) jack. Auto switch to HP output when HP Out jacks detected.
USB Host Audio Streaming Port
connects USB host audio, Example: Mobile Phone
USB Data/Power Port
For USB Audio and power
Optical In Port
Optical Out Port
Line In (Left) Port
Line In (Right) Port
Line Out (Left) Port
Line Out (Right) Port

Note: BLE Connection

For the first-time connection with the mobile app, the app initiates the connection. The Bluetooth button LED will start Fast Blinking Blue and user and single press to consent the BLE connection of the mobile app.
If user cancels the connection, the Bluetooth button will revert back to the previous state.

Master Reset

Long Press both Bluetooth and Display button for 5secs to trigger master reset, or upon triggering Reset Device from the app, the LED display will show “RESET”.

Software Download

Personalize your audio experience with Sound Blaster X5 on the Creative app.
Download the software and its user manual at creative.com/support/SBX5.

Creative app

PC

Download the Creative app for your PC from creative.com/support/SBX5 to gain complete control of your audio experience with the Sound Blaster X5.

iOS and Android

Control your Sound Blaster X5 even while it’s connected to your console! Simply download the Creative app from Apple’s App Store or Google Play Store to start.

With the Creative app, you can

Access and control our all-new SmartComms Kit’s suite of smart communication features such as VoiceDetect, NoiseClean-in, and NoiseClean-out to improve your online communication experience
Personalize audio effects with Sound Blaster Acoustic Engine’s sound mode features such as Surround, Bass, Crystalizer, Smart Volume, and Dialog Plus
Experience professionally-tuned audio presets for movies, music, and games
Set up speakers and headphones configurations
Adjust playback and recording settings

TECHNICAL SPECIFICATIONS

Bluetooth Version: Bluetooth 5.0
Maximum RF Output Power: 4 dBm
Operating RF range: 2402–2480 MHz
Supported Bluetooth Profiles: A2DP (Wireless Stereo Bluetooth), AVRCP (Bluetooth Remote Control)
Input: 5V 1A
Max Operating Temperature: 45°C

Note: Compliance marking are located at the bottom of the product.

OTHER INFORMATION

Please visit creative.com/compliance/SBX5 for the user guide and safety and regulatory information. Please visit creative.com/support/SBX5 for all other support related to your product.

PRODUCT REGISTRATION

Registering your product ensures you receive the most appropriate service and product support available. You can register your product at creative.com/register. Please note that your warranty rights are not dependent on registration.

Warranty

Warranty information is supplied with your product in a separate document.
Please keep your Proof of Purchase for the duration of the Warranty period.
Keep this document for future reference.

© 2022 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth ® word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subjected to change without notice. Actual product may differ slightly from images shown. Use of this product is subjected to a limited warranty.

CS: 2400-2483.5 MHz
CT: SB182:0

RoHS

RoHS, creative.com/compliance/SB1820
Sound Blaster X5 RoHS

The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchase the product.

Hereby, Creative Labs Pte. Ltd. declares the sound card, model no. SB1820 is in compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at http://www.creative.com/EUDoC

SAFETY & REGULATORY INFORMATION

Read this instruction carefully and completely before using the product. Refer to the following information to use your product safely, and to reduce the chance of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warranty for your product. For more information, read the warranty available with your product.

Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.
Do not expose your product to water and moisture. If your product is moisture-resistant, take care and not to immerse in water or expose to rain.
Clean the product only with a soft, dry cloth.
Do not dismantle or attempt to repair your product.
Do not pierce, crush or set fire to your product
Keep your product away from strong magnetic objects
Keep the product, accessories, and packaging parts out of reach of children and pets to prevent accidents. Swallowing and choking hazards.

Warning on Choking Hazard

This product and its accessories may contain small parts which must be kept away from children.

WARNING

CHOKING HAZARD-Small Parts
Not for children under 3yrs.

Sound Blaster X5 (SB1820) Additional Safety and Regulatory information.

The following sections contain notices for various countries.

CAUTION: This product is intended for use with FCC/CE-certified computer equipment. Please check the equipment operating/installation manual and/or with the equipment manufacturer to verify/confirm if your equipment is suitable prior to the installation or use of the product.

FCC STATEMENT

Federal Communication Commission (FCC) Interference Statement

FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if no installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed with computer equipment certified to comply with Class B limits. All cables used to connect to the computer and peripherals must be shielded and grounded. Operation with non-certified computers or non-shielded cables may result in interference to radio or television reception.

MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Notice for Canada

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

SUPPLIER’S DECLARATION OF CONFORMITY

According to CFR Title 47 §2.1077

Importer’s Name: Creative Labs, Inc.
Importer’s Address: 1900 McCarthy Boulevard, Suite 103, Milpitas, CA 95035
Tel: (408)428-6600

declares under its sole responsibility that the product

Trade Name: Creative
Model Numbers: SB1820
Product Name: Sound Blaster X5

has been tested according to the FCC / CISPR22 requirement for Class B devices and found compliant with the following standards:

EMI/EMC: ANSI C63.4 & C63.10, FCC Part 15 Subpart B & C Complies with Canadian ICES-003 Class B & RSS-247 standards

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesirable operation.

Supplementary Information: Thinh Bui

Compliance Manager
Creative Labs, Inc.
30 Nov 2022

European Compliance

This product complies with all applicable directives. A copy of the EU DoC is available at Creative website.

CAUTION: To comply with the Europe CE requirement, this device must be installed with CE certified computer equipment which meet with Class B limits.

All cables used to connect this device must be shielded, grounded and no longer than 3m in length. Operation with non-certified computers or incorrect cables may result in interference to other devices or undesired effects to the product.

MODIFICATION: Any changes or modifications not expressly approved by Creative Technology Limited or one of its affiliated companies could void the user’s warranty and guarantee rights. The insulating coating on the device also serves the purpose of ESD protection.

Notice for Korea

Class B Equipment

(For Home Use Broadcasting & Communication Equipment) This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home an it can be used in all areas.

Notice for Taiwan

CREATIVE-SB1820-Sound-Blaster-X5-USB-Host-Audio-Streamer-
fig-5

Taiwan: CNS 15663

Declaration of the Presence Condition of the Restricted Substances

Marking

Vietnam RoHS Statement

This product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the Socialist Republic of Vietnam (“Circular”), it does not contain the following substances in a concentration greater than the Maximum Limit value as specified in the Circular.

Substance: Maximum Limit (ppm)1, 2
lead: 1000
mercury: 1000
cadmium: 100
hexavalent chromium: 1000
polybrominated biphenyls (PBB): 1000
polybrominated diphenyl ethers (PBDE): 1000

Maximum Limit does not apply to applications exempted from the Circular.
Maximum Limit refers to concentration by weight in homogeneous materials.

Notice for Australia

Notice for Malaysia

Notice for Singapore

Documents / Resources

| CREATIVE SB1820 Sound Blaster X5 USB Host Audio Streamer [pdf] User Guide
SB1820, 2AJIV-SB1820, 2AJIVSB1820, SB1820 Sound Blaster X5 USB Host Audio Streamer, Sound Blaster X5, USB Host Audio Streamer, Host Audio Streamer, Streamer
---|---