AMEWi 26088 Brushless Motor Instruction Manual

AMEWi 26088 Brushless Motor

Welcome !
AMEWI TRADE e.K. Is a young, fresh, international Import and Wholesale company in the RC and Toy industry located in Paderborn. Our product range contains over 6000 articles. Containing to it are Cars, Helicopters, Quadrocopters, Boats and Tanks including a lot of extra parts and all needed spare parts. Our distribution network contains over 600 specialist dealers and online shops.
AMEWI Trade e.K. is an Wholesale Company. We only distribute our goods to retailers.
If you are an End-Customer who is buying AMEWI-Products , you contract with your retailer.
In case of warranty please always contact your retailer.
AMEWI Trade e.K. Nikolaus-Otto-Str. 18 33178 Borchen

Owner : Melitta Widerspan
Service times : Tuesday 9:30 a.m. – 12:00 p.m. | Thursday 2:00 p.m. – 4:30 p.m.
Telephone: +49 180 5009821 (landline 14 cents / min, mobile max. 42 cents / min)
Support: https://amewi.com

Declaration of Conformity

• This product has been manufactured according to actual technical standards, The product is matching the requirements of the existing european and national guidelines.
• The Declaration of Conformity has been proofed. AMEWI Trade e.K. declares that this product is matching the basic requirements and remaining regulations of the guideline 2014/53/EU (RED).
• The declarations and documents are stored at the manufacturer and can be requested and applied there.
• The full text of the declaration of conformity can be found at: https://amewi.com/Konformitaetserklaerungen
• For additional questions to the product and conformity please contact:
• Amewi Trade e.K. Nikolaus-Otto-Str. 18, 33178 Borchen or via the website amewi.com

Security and Hazard Warnings

• Wamingl For damage, caused by disregarding of the manual, warranty expires I
• We are not liable for secondary failures, material or personal damage, caused by inproper usage or disregarding the security notices.
• Warning! Based on security and registration (CE) reasons, it Is forbidden to modify the product personally. Do not disassemble the product.
• Warning! Small parts. Danger of suffocation or risk of injury caused by small parts.
• Warning! Suitable for people aged 14+ l
• Even a drop down from a small height can cause damage to the product.

Battery Notice and Battery Disposal

Wamingl Battery do not belong in childrens hands. A change of the battery has to be done by an adult person. Never mix chargable batteries with non- chargable batteries. Never mix fully charged batteries with almost emtpy batteries. Never mix batteries of different capacities. Never try to charge dry batteries. Take care of the correct polarity. Defective batteries belong to special waste. Never leave a charging battery unattended. For questions about the charging time please read the manual or ask the manufacturer.

DISPOSAL

• The company AMEWI Is registered below the WEEE Reg. Nr. DE93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronlcal products are not allowed to put In household garbage. Please dispose the product at the end of the lifetime accroding to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal over the household garbage is forbidden I
• Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage.
• Additional notations for the critical heavy metal are: Cd=Cadmium, Hg=Quecksilver, Pb=lead (Label is placed on the batteries, for example below the bottom left trash symbols).
• Based on RoHS labeling the manufacturer confirmes, that all limit values were taken care of at the time of manufacturing.
• Batteries labeled with the recycling symbol can be put into used battery collecting tank. (Most supermarkets have)
• They are not allowed to be put into local household garbage.
• AMEWI Trade e.K. is involved in the dual system for boxing over the company Firma Landbell AG.
• All used boxes are collected from partner companies (waste disposal contractor) at private customers (local household), sorted and properly utilized. The Involvement in a
• Dual Systems helps to save CO2 Emissions.

Important Statement

• Thank you for buying AMEWI’s product. Our product is special control substances and people who under 14 years old must not use the product. Please read this brochure carefully before using the product. You are regarded as accepting all contents in this user manual when using this product.
• This product is not an ordinary toy but a piece of complicated remote boat model which is integrated with professional knowledge by mechanic, electronic, air mechanics, high-frequency emission etc. It’s supported to play the boat under legal laws and safety water area. The users promise to be responsible for their behavior when using this product.
• We undertake no liability for those accidents caused by environment, illegal behavior, improper operation and refitting after sale of the product.
• We have entrusted the distributor to provide technology support and after-sale service. If you have any question about use, operation, repair etc., please contact the local distributor.
• Only use the Amewi’s original or authorized spare parts and accessories, otherwise ,we are not responsible for any injuries or damage(s) that may caused.
• Keep the package and user manual so as to refer to the important information whenever.

Safety Precautions

This product is suitable for experienced RC model users aged 14 years or above. This product contains small parts, please put it out of child’s reach.

1. Playing field
   The playing field must be legally approved by your local government. Do not play the boat in the swimming pool or near the people who is swimming in the water area. Playing field must spacious enough.

2. Use correctly
   For safety elements, please only use Amewi spare parts to replace the damaged parts. Improper assembly, broken hull, defective electronic equipment or unskilled operation all may cause unpredictable accidents such as boat damage or human injury. Please pay special attention to safety operation and have good knowledge of accident responsibility that the user may cause.

3. Keep away from obstacles and crowd
   The speed and status of a running RC boat is uncertain and it may cause potential danger. So the user must keep away from crowd, obstacles in the water etc. when operating a running RC boat. Do not play the boat in rainy, storm, thunder and lighting weather for the safety of user, around people and their property.

4. Keep away from salt water environment
   The boat inside is consisted of precise electronic components. Salt water may damage electronic components and cause accident.

5. Safe operation
   Please operate the RC boat in accordance with your physical status and playing skill. Fatigue, listlessness and improper operation may increase the rate of accident. Before playing the boat, please make sure no water plants to avoid propeller from getting tangled as this may cause damage to boat. It’s not suggested to play it under this condition.

6. Keep away from rotating parts
   After power on the boat, rotating parts like propellers may cause serious injury and damage. Keep face and body away from rotating parts.

7. Keep away from heat
   The RC boat is made of metal, fiber, plastic, electronic components etc. Keep away from heat and sunshine to avoid distortion and damage.

8. The boat should be controlled within max control distance. Do not play the boat in place with signal interference. Or may cause signal interruption and the boat will be out of control, which may result in accident.

9. Do not touch the hot motor to avoid being burnt.

10. Please use the recommended charger only. Power off the boat before cleaning it. Check the charger, charging plug etc. regularly to ensure they can work well. If there is any damage, stop using it immediately till it’s fixed well.

Safe Notice for Battery

• Keep the battery away from children and animals.
• Discontinue charging if you notice the battery is swollen.
• Do not charge the battery once it is crashed or damaged.
• Check the battery if any damage after crash.
• Do not overcharge the battery.
• Keep the battery away from flammable material or liquid.
• Do not put the battery on high temperature place, store it in a proper container to avoid damage or explode.
• Do not put the battery into your pocket or bag to avoid contacting with sharp objects or metal.
• Do not dissemble, refit and repair the battery.
• Do not use the battery to crash or hit hard surface.
• Do not put the battery in water and keep it in dry place at ambient temperature.
• Do not leave the battery without supervision when charging.
• Make sure that there is no short circuit of the power wire.
• Please use the recommended charger only.
• Check the charger™s wire, plug, surface regularly. Do not use any broken charger.
• If do not fly the drone more than one week, maintain the drone battery with about 50% power to keep its performance and working life.

Charging Instruction for balance charger

Charging operation(Diagram)：

• Plug the adapter into the AC power socket AC 100-240V, its output end to connect with balance charger and the red indicator of balance charger keep solid, the green indicator will keep flashing alternatively.
• Plug the battery connector into the balance charger port
• When charging, the green indicator will keep solid green
• After fully charged, the green indicator will be off.

Security Warning

1. When charging, the balance charger should be put in dry and ventilated place, keep the battery away from flammable material or liquid.
2. The balance charger only can charge for Lithium polymer batteries. It only can charge a group of 2 strings or 3 strings of batteries, can not charge for 2 or above groups of batteries at the same time, otherwise it will damage the charger or batteries.
3. When charging, you must pick out the battery from the boat. Do not leave the battery without supervision when charging to avoid any accident.
4. Don’t charge for the Lipo batteries at once after running, and the battery is still not yet cooling down. Otherwise, it may cause battery to get swollen.
5. Before connecting the battery and charger, please make sure that the polarity is correct.
6. When charging the battery, please make sure no external force impact or fall down, otherwise it may cause internal short circuit and result in danger.
7. In order to make sure your safe usage, please obey the instruction and use original charging configuration( Power adapter and balance charger) and Lipo battery. When the Lipo battery gets aging and bulging, please replace with new one in time.
8. After fully charged the battery, if don’t remove it from the charger for some time, then it may cause auto discharge and resulting in battery power loss. When the charger defects the voltage is lower than rating voltage, then it will charge again until full. Long-term repeated charge and discharge may shorten the battery life.

Li-Po Battery Disposal & Recycling
Wasted Lithium-Polymer batteries must not be placed with household trash. Please contact local environmental or waste agency or the supplier of your model or your nearest Li-Po battery recycling center.

Safety notice before sailing

1. Please make sure the transmitter and boat battery is in full status.
2. Please make sure the transmitter throttle stick and rudder knob can be reset.
3. When power on the equipment, please obey the power on and off order. You need to power on the transmitter first and then power on the boat. When turn off, you need to disconnect the boat power and then turn off the transmitter. Incorrect turn on and turn off order may cause the boat be out of control to affect yourself and other people’s safety. Please cultivate correct turn on and turn off habit.
4. Make sure the connection is solid between battery and motor etc. The ongoing vibration may cause bad connection of power terminal to make the drone out of control.
5. Improper operation may cause impact to the boat and damage the hull or propeller, then cause difficult control or unable to control. Please go to the local distributor to buy new parts for replacement so that the boat will return to its best status.

Boat and transmitter instruction

Boat

Support bracket

Hull spec| 630x170x110mm| Boat battery| 2200mAh 11.1V
---|---|---|---
Hull weight| 1233g| Lipo Battery charging time| 180~190mins
Propeller diameter| 40mm| Control range| 120~150 m
Sailing time| 4~6mins| Max Speed| 35~45Km

Exploded diagram

Battery board holder
3| EVA waterproof ring| 15| Support bracket| 27| Pressure water pieces
4| Boat surface| 16| Rubber stopper| 28| O-ring press pieces
5| Steering gear retainer| 17| Rod| 29| Right navigation
6| Steering gear| 18| Rod waterproof ring| 30| Left navigation
7| Spindle tube holder| 19| Spindle tube| 31| Rod retainer
8| Steel rope holder| 20| Teflon tube| 32| Tail rudder rocker arm
9| Brushless motor| 21| Anti-slip nuts| 33| Tail rudder
10| Outlet plugs| 22| Propeller| 34| Tail rudder support bracket
11| Receiver box| 23| Propeller holder| 35| Left water press
12| ESC case| 24| Steel rope| 36| Right water press

Transmitter

Button Function

Forward trim| Press down this button to adjust the throttle forward deviation.
---|---
Backward trim| Press down this button to adjust the throttle backward deviation.
Left Rudder trim| Press down this button to adjust the tail rudder left turning deviation
Right Rudder trim| Press down this button to adjust the tail rudder right turning deviatio
Power switch| Push right to power on the transmitter, and back to power off.
Steering knob| Twist forward the knob, the boat turns right. Twist backward the knob then turn left.
Throttle trigger| Pull down the throttle trigger and the boat goes forward. Push up the trigger, then go backward.

Battery installation

Open the battery cover on the back side of the transmitter and put 4 1.5V alkaline batteries (AA, not included) into the box in accordance with electrode instructions.

Battery case

Boat battery installation method

1. Twist to left or right to open the outer cover lock(Picture 1), then open up the cabin cover(picture 2).

2. Two left cabin inner cover lock twisted to right and open them. And the right two locks turns to left to open(picture 3), then you can take out the inner cabin cover(picture 4).

3. Put the Lipo battery into the boat battery holder(picture 5), then use velcro tape to fasten the battery is OK.(Picture 6)

4. Power on the transmitter, then the transmitter LED indicator will start to flash, and it shows ready to code pairing.

5. Connect the Lipo battery socket with ESC power terminal and the transmitter will make a sound dididi, it shows code pairing successfully.
   Notice:

6. After power on the boat, the motors will make a sound di… Di….

7. The Lipo battery wires need to put aside of the boat to avoid tangled or broken off by the rudder wheels.

8. If there is a few boats to play together, you need to code pairing one by one, and can not do it at the same time to avoid improper opertaion and cause danger

9. After operate above steps, please install the covers as below order:

10. Install the inner cover to the hull and then tighten the inner cover lock.

11. Install the outer cover to the hull and then tighten the outer cover lock

Check before sailing

1. Check the rotation direction of propeller once power on. ( Picture 7). Pull back the throttle trigger of transmitter slowly, the propeller will spin counterclockwise. Push forward the throttle trigger slowly, the propeller will spin clockwise
2. Don’t fold the water-cooling hose and keep it smooth inside.
3. Twist the rudder knob towards counterclockwise, the steering gear will turn left (Picture 8); Twist the Rudder Knob clockwise, the steering gear will turn right (Picture 9).
4. Make sure that the boat cover is locked up and buckled. Make sure that the tail rubber stopper is tight to prevent the water from entering.
5. Use the provided screw driver and wrench to fix the screws and ensure that all screws are fixed and tight.
6. Make sure the power plug and battery wire are connected correctly and tightly. Keep the battery wire to the boat side to avoid it touching the motor.

Calibration

After a period of sailing, it may be difficult in control if the trimming is unavailable in direction. Please carry out the following procedures to calibrate the direction

1. After pairing the frequency, if the steering gear is not vertically upward (Tolerance within 10° is in the normal range.)（Picture 10）, please refer to the instruction for steering gear replacement on page 14 and then calibrate the steering gear

2. Check if the tail rubber is perpendicular to the boat, if the angle is not vertical slightly, use the provided hexagon wrench to release the screw for holding rod (Picture 11), then re-calibrate and fix the screw.

3. If boat slightly yaw during sailing, it can be adjusted by using the trimming button.
   Notice：

4. Keep away from propeller during calibration to avoid injury or damage.

5. The floating waste in water may easy to damage the steering gear or propeller when the boat sailing at high speed. Please replace the damaged steering gear or propeller in time

How to operate the boat

1. Pull back the throttle trigger of the transmitter
2. Push forward the throttle trigger of the transmitter
3. Pull back the throttle trigger of the transmitter and move the steering knob counterclockwise
4. Pull back the throttle trigger of the transmitter and move the steering knob clockwise.
5. If the boat capsizes: Push forward the throttle trigger of the transmitter and then pull back at once. The boat will then return to normal. (The capsize reset function will turn off automatically when the boat in low battery.)
6. If the boat drifts to the right: Press the left rudder trim on the transmitter and the boat will gradually correct the rudder alignment. It will start moving straight
7. If the boat drift to the left: Press the right rudder trim on the transmitter and the boat will gradually correct the rudder alignment. It will start moving straight.
8. If the boat still moves forward when the throttle trigger is in the middle position: Press backward trim until the boat stops going forward.
9. If the boat still moves backwards when the throttle trigger is in the middle position: Press forward trim until the boat stops going backwards

Boat function introduction

Low Battery Alarm

When the boat in low battery, the transmitter will beep” di.di.di…” constantly to remind the user to remote back the boat as soon as possible. And the boat speed will slow down to half and the battery only can last about 1 minute at such condition. Otherwise the it may cause over discharge to damage the battery or low battery to loose control. The capsize reset function will turn off automatically when the boat in low battery.
When the transmitter in low battery, the transmitter will beep ” di…di…di…” to remind the user to remote back the boat to replace the batteries as soon as possible. Or the boat may be out of control.

Out of Range Alarm

When the boat is running out of the max remote control distance, the transmitter will Beep“didi…didi…didi…” to alarm the user to remote back the boat immediately. Or the boat may be out of control and run away.

Spare parts replacement instruction diagram

Propeller replacement

1. Squeeze the motor and fix it in position by hand (Picture 12)；
2. Use the tool to remove the anti-slip nut in the back of propeller in counterclockwise direction and pull out the propeller;
3. Install the new propeller as picture shown.
4. Use the tool to fix the anti-slip nut in clockwise direction.

Notice :

1. Cut off the power before you replace the propeller.
2. The side with notch of propeller shall fit toward the fixed part of propeller, otherwise the boat can not sail

Steel rope replacement instruction

1. Squeeze the motor and fix it in position by hand (Picture 12)
2. Use the tool to remove the anti-slip nut back of propeller in clockwise and pull out the propeller.
3. Use the provided hexagon wrench to remove the fixed part of propeller. (Picture 14)
4. Use 2 provided wrenches to remove the steel rope fixed part in counterclockwise, then pull out the damaged steel rope.
5. The procedure of steer rope replacement is reverse of the disassemble procedure

Notice: The steel rope will be cut off easily when it gets stuck with waste.Please make sure to avoid the waste in the water. Please cut off the power before you replace the steel rope.

Steering gear replacement

When the steering gear is damaged, you need to take out the steering gear holder, and pick out the defective part, then loose the steering gear arm. When install the new steering gear, power on the boat and install the arm to the steering gear, lock the fasten parts, then it’s ok to play.

1. Disassemble the rod screw, and then loose the steering gear press part and take out the steering gear.(Picture 16)

2. When the new steering gear is powered on, install the arm and fasten the screw, please take care of the vertical degree( picture 17).
   (There is some tolerance which is normal)

3. Install the rod into the second hole of steering gear arm( picture 18).

4. Install the steering gear into its slot and lock the press pieces and rod screws (picture 19).

Maintenance and Repair

1. When RC boat stops running, the battery must be removed.
2. After playing the boat, if any water inside the hull, then you need to pick out the rubber stopper and tilt the boat to one side to pour out the water. Then put on the rubber stopper and press tightly.
3. To avoid painted surfaces of the boat from getting damaged and long time exposure to the sun. Every time after playing, you need to clean the boat and dry the hull to make sure the boat is in good condition.
4. If the RC boat is not used for a long time, disconnect the boat battery from the terminal and also remove the transmitter batteries to avoid leakage of the battery as this may damage the transmitter or boat.

Circuit diagram

Troubleshooting Guide

1

|

The transmitter indicator light is off

| 1. Low battery.| 1. Replace the transmitter battery.
2. The battery positive pole and negative pole are in reverse order.| 2. Install the battery in accordance with the user manual.

3. Poor Contact.

| 3. Clean the dirt between the battery and the battery slice.

2

|

Fail to pair the drone with transmitter

| 1. Indicator light is off.| 1. The same as above 1.2.3.

2. There is interfering signal nearby.

| 2. Restart the drone and power on the transmitter.

3. Improper operation.

| 3. Operate the drone step by step in accordance with the user manual.
4. The electronic component is damaged for frequent crash.| 4. To buy spare parts from local seller and replace damaged parts.

3

|

The boat is under- powered or can not sail.

| 1. The propeller deformed seriously.| 1. Replace the propeller.

2. Incorrect installation of propeller.

| 2. Install the propeller in accordance with the user manual.

3. Low battery.

| 3. Recharge the drone battery as per instruction.
4. The battery is expired or over discharg protection.| e4. Buy a new battery from local seller to replace the battery.

5. Poor contact.

| 5. Disconnect the battery and then connect it with the plug again.

4

|

The boat tilts to one side.

| 1. The steering gear arm is not vertical seriously.| 1. Calibrate the steering gear arm as per instruction.
2. The tail rudder is not vertical seriously.| 2. Calibrate the tail rudder as per instructio

3. The steering gear slips.

| 3. Replace the new steering gear as per instruction.

Important Statement

• Due to the continuous improvement of products, the design or technical parameters will be modified without prior notice.
• All content in this user manual have been checked carefully. If there is any question of printing or mistake, the company reserves the rights of final explanation.
• Thank you again for your choice and your trust!

References

• Ferngesteuerte Fahrzeuge, Boote, Flugzeuge, Hubschrauber und Panzer - amewi.com
• Ferngesteuerte Fahrzeuge, Boote, Flugzeuge, Hubschrauber und Panzer - amewi.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>