ZYXEL RGS200-12P 12-Spot Gbe Managed PoE Switch User Guide

June 7, 2024
ZYXEL

ZYXEL Logo

ZYXEL RGS200-12P 12-Spot Gbe Managed PoE Switch

Product Image

Overview

The RGS200-12P Managed Rugged switch is designed for supporting environmental hardening application. Managed switches are easier to prioritize, partition, and organize user’s network, providing a more reliable and better quality services.

Dimension Illustration

Image 01

DIN-Rail Mounting

Mounting step

  1. Screw the DIN-Rail bracket on with the bracket and screws in the accessory kit.
  2. Hook the unit over the DIN rail.
  3. Push the bottom of the unit towards the DIN Rail until it locks in place..

Image 02

Wall Mounting

Screw the wall-mount brackets with screws in the accessory kit.

Image 03

Connecting Power Terminal Block

The switch can be powered from two power supplies (input range 12V- 58V). Insert the positive and negative wires into V+ and V­contacts on the terminal block respectively and tighten the
wire-clamp screws to prevent the wires from being loosened.

  • The DC power should be connected to a well-fused power supply.
  • Input power should be within the range of 54-58VDC for PoE+ compliant, or 48-58VDC for PoE compliant.

Image 04

This equipment is intended to be used in a Restricted Access Location, with access limited to SERVICE PERSONAL and USERS authorized to be in that location.

Alarm Relay and Ground

The alarm relay output contacts are in the middle of the DC terminal block connector as shown in the figure below.
The alarm relay out is “Normal Open”, and it will be closed when detected any predefined failure such as power failures or Ethernet link failures.
The relay output with current carrying capacity of 0.5A@ 24 VDC

Image 05

Console Connection

  • D89 connector connect to computer COM port
    • Baud rate: 115200bps
    • 8 data bits, 1 stop bit
    • No Parity
    • None flow control

Connect & Login to Managed Switch

  1. Connecting to the Ethernet port (RJ45 Ethernet port) of Managed Switch.
  2. Factory default IP: 192.168.1.1
  3. Login with default account and password.
    Username: admin
    Password: 1234

Support Information
USA
Tel: + 1 800 255 4101
Email: support@zyxel.com

EU
Visit: https://support.zyxel.eu

EU Importer
ZyXEL Communication A/S
Generatorvej 8D, 2860 S0borg, Denmark. https://www.zyxel.com/dk/da/
US Importer
ZyXEL Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001 https://www.zyxel.com/us/en/

ZYXEL Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals