TheraSauna TCM9938A Ionizer Fan Instructions
- June 13, 2024
- TheraSauna
Table of Contents
TCM9938A Ionizer Fan
Instructions
TCM9938A Ionizer Fan
AIR IONIZER
N328 product information
IMPORTANT!
- Do not immerse unit in water or other liquid
- Supervision is necessary when used by or near children
- Do not use unit for other applications than its intended use
- To prevent corrosion, remove batteries when not using for long periods
USE & OPERATION
- Remove the battery door on the bottom of the unit and install 4 “AA” 1.5V high-quality alkaline batteries. (not included)
- Press the “ON/OFF” button once and the power Indicator light will come on. The light will flash every 3 seconds letting you know the unit is in operation.
- Press the “MODE” button to choose the different mode settings:
Mode 1: Press the “MODE” button and the power indicator will light up.
The ionizer will operate continuously for about 20 minutes. Then it will enter
into a cycle of sterilization and deodorization for 2.5 minutes every hour.
When the unit is not sterilizing and deodorizing, it will be in sleep mode.
Mode 2: Press the “MODE” button and the power indicator will light up.
The ionizer will operate continuously for about 30 minutes. Then it will enter
into a cycle of sterilization and deodorization for 4 minutes every 2 hours.
When the unit is not sterilizing and deodorizing, it will be in sleep mode.
PRODUCT PATTERN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>