SEALEY AP3407 Rollcabs With Ball Bearing Slides Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
SEALEY AP3407 Rollcabs With Ball Bearing Slides
Thank you!
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop
practice regulations are adhered to when using this product.
WARNING! Use caution when handling and assembling the metal components.
The metal may have sharp edges or corners, the use of protective gloves is
recommended.
✘ DO NOT open more than one drawer at a time.
✘ DO NOT step on the drawers.
✘ DO NOT let children near the rollcab.
✔ Ensure all drawers are fully closed and the self locking catch is activated,
before moving the rollcab.
✔ Secure the brakes when rollcab is in the desired position
✔ Keep the work area clean, uncluttered and ensure there is adequate lighting.
✘ DO NOT use in damp work areas.
WARNING! The warnings, cautions and instructions referred to in this
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood that common sense and caution are factors
which cannot be built into this product, but must be applied by the operator.
ASSEMBLY
-
Attach the castors to the bottom of the trolley (fig.1) using 4 bolts and washers per castor.
Note: The swivel castors should be mounted on the same side as the side handle (left hand side). -
Insert the side handle into the cabinet with four bolts and washers (fig.2).
MAINTENANCE
- Lubricate the castors and check the castor fixings periodically.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal,
dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will
be required for any claim.
CUSTOMERS SUPPORT
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
01284 757500
01284 703534
