Shenzhen Haitao HT-506 Clock ALARM WIRELESS CHARGER User Manual
- June 10, 2024
- Shenzhen Haitao
Table of Contents
Shenzhen Haitao HT-506 Clock ALARM WIRELESS CHARGER
Product Information
The Clock/Alarm Wireless Charger Model HT-506 is a multi-functional device that can charge your phone wirelessly, display the time and date, and set alarms. The device has a sleek design and is available in black and white color options. It has an input of DC 5V/3 9V/3A (QC/PD) and wireless output of 15W max. The device is compatible with all Qi-enable phones and has a charging efficiency of 75%-85%. The working distance for charging is up to 8mm.
Product Usage Instructions
- Time Setting: When the time interface is displayed, you can set the time by following these steps:
- Long press [ ]: Enter 12/24 hour setting in turn, then short press to proceed, hour setting, minute setting, and exit time setting.
- Short press: add hours, add minutes
- Short press: decrease the hour, decrease the minute
- Alarm Setting: When the time is displayed, you can set up to three alarms by following these steps:
- Short press [ ] to enter alarm setting.
- Press to turn alarm on or off.
- Long press M when alarm is displayed to enter alarm time setting (AL1, AL2, AL3 in sequence), then press to set the alarm time.
- When the alarm rings, it will ring for about 20s, stop for about 10s of snooze, and then ring again for about 20s before ending. You can press any key to interrupt the ringing.
- Display Brightness Setting: When the time is displayed, you can adjust the display brightness by following these steps:
- Short press to enter display brightness (br) setting.
- Short press to change 5 display brightness modes (0: Display brightness according to time; 1-4: The brightness increases in turn; 5: 5s screen-off mode).
- Press [ ] to exit the display brightness (br) setting.
- FCC Compliance: The device complies with part 15 of the FCC Rules. It may not cause harmful interference and must accept any interference received. Any changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment. During operation, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Function Overview
- Wireless charger
- Alarm clock
- Time/date display
Operation
- Arrangement of function keys
- Time setting (when the time interface is displayed, operate as follows)
- Long press [ ]: Enter 12/24 hour setting in turn, then short press to proceed, hour setting, minute setting, and exit time setting.
- Short press ◁: add hours, add minutes
- Short press ▷: decrease the hour, decrease the minute
- Alarm setting
- When the time is displayed, short press [ ] to enter the alarm setting (three groups of ALARM).
- When entering the above setting mode, press ◁ to turn ALARM on and off; when ALARM is displayed, long press M to enter the ALARM time setting (AL1, AL2, AL3 in sequence), and press ◁ ▷ to set the ALARM time.
Notice:
* When the alarm rings, the ringing time is about 20s, and then it stops automatically. After about 10s of snooze, the alarm rings again for about 20s, and the alarm sound ends after the ringing.
* During the ringing period, you can press other keys to interrupt, after the interruption, the alarm will end- Display brightness (br) setting method
- When the time is displayed, short press▷, to enter the display brightness (br) setting.
- Short press▷to change 5 display brightness (be) modes.
- Press[ ]to exit the display brightness (br) setting.
- Display brightness (br) as follows:
- 0: Display brightness according to time;
- 1—4: The brightness increases in turn;
- 5: 5s screen-off mode.
In the setting mode, no button 10S returns to the display time state.
Specification
- Materils: ABS+Acrylic
- Dimension: 187x91x61(mm)
- Color option: Black/White
- Input: DC 5V/3 9V/3A (QC/PD)
- Wireless Output: 15W Max.
- Support: 3W/5W/7.5W/10W/15W
- Compatibility: all qi-enable phones
- Working Distance: ≤8mm
- Charging Efficiency: 75%-85%
Packing
- Clock/Alarm wireless charger
- USB C cable
- User’s manual
Warning:
- It is not a toy ,put it away from children.
- Don’t use it while the temperature over 45℃.
- Don’t put it in fire or other high temperature place.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co‐located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.