Fleurco MFMO2039 Magna 20 x 39 Inch Oval Wall Mount Bathroom User Guide

Fleurco MFMO2039 Magna 20 x 39 Inch Oval Wall Mount Bathroom

Product Information

• Product Name: MAGNA – MFMO2039
• Installation and User’s Guide: Download
• Serial Number: Record the serial number on the back page and save this guide for future reference.
• Manufacturer: FLEURCO
• Product Specifications:
  • Grounded, cord-connected, and rated at a maximum 15 amps
  • Intended for use on a nominal 120-volt circuit
  • Has a grounding plug

Product Usage Instructions

1. Read all instructions carefully before proceeding.
2. Make sure the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
3. Close supervision is necessary when this device is used by, or near children, invalids, or disabled people.
4. Use this device only for its intended use as described in the instructions. Do not use attachments not recommended by the manufacturer.
5. Never operate this device if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the device to a service center for examination and repair.
6. Connect this device to a properly grounded outlet only. See Grounding Instructions.
7. To maintain the mirror and aluminum parts, wipe them down with a mild soap diluted in water. Avoid using scouring powder pads, abrasive material, strong bleach, or sharp instruments.
8. Test products on a small inconspicuous surface prior to use.
9. Follow the hardware listing and measurements provided for mirror installation.
10. Measure the center of the holes and mark the drilling locations. Ensure the marks are leveled.
11. Use the keyhole locations for vertical or horizontal installation.
12. Adjust the light brightness by short-pressing the power button/dimmer. Long press to turn the light and defogger on/off.
13. Short press the color temperature selector to choose between 2700K, 4500K, and 6500K. Long press to gradually cycle through the options.

Read all instructions carefully before proceeding. Record the serial number on the back page and save this guide for future reference.

THANK YOU
We can assure you that FLEURCO has used the best materials and has applied the strictest quality control measures to ensure that each and every unit meets the highest quality standards. This booklet contains general information about the unit as well as step-by-step installation instructions.

BEFORE BEGINNING

• Carefully read the instructions before beginning the installation.
• DANGER! To avoid the risk of electrocution, turn off the electricity mains before commencing the installation.
• It is strongly recommended that this installation be performed by a professional electrician.
• It is recommended that you wear safety glasses at all times during the installation.
• This product is wall-mounted only

GROUNDING INSTRUCTIONS

• This product is grounded, cord-connected, and rated at a maximum of 15 amps.
• This product is intended for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug.
• No adapter should be used with this product.

SAFETY INSTRUCTIONS

Read all instructions before using this device.

WARNING
To avoid the risk of burns, fire, electric shock, or injury to persons:

1. Always unplug this device from the electrical outlet before cleaning.
2. Unplug/disconnect from the outlet before putting on or taking off parts.
3. Close supervision is necessary when this device is used by, or near children, invalids, or disabled people.
4. Use this device only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
5. Never operate this device if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the device to a service center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never drop or insert any object into any opening.
8. Do not use this outdoors.
9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
10. To disconnect, turn all controls to the off position, then remove the plug from the outlet.
11. WARNING: Risk of electric shock – Connect this device to a properly grounded outlet only. See Grounding Instructions.
12. Mount devices at the correct height.

SAVE THESE INSTRUCTIONS

MAINTENANCE

Never use scouring powder pads, abrasive material, strong bleach or sharp instruments on metal components or glass. An occasional wiping down with a mild soap diluted in water is all that is needed to keep the mirror and aluminum parts looking new. Test products on a small inconspicuous surface prior to use.

TOOLS AND MATERIALS REQUIRED

HARDWARE LISTING

SPECIFICATIONS

• Model: MAGNA – MFMO2039

ELECTRICAL OUTLET

Ensure there is sufficient clearance at the back of the mirror for the electrical plug.

• Recommended outlet zone

MIRROR INSTALLATION

POSITIONING
Determine the desired position of the mirror. Mark the top curve of the mirror.

KEYHOLE LOCATION
Measure the center of the holes and mark the drilling locations and ensure marks are leveled.

INSERT SCREWS
Using a drill, make holes and insert with supplied plugs and screws. Leave a gap of 2 – 3mm between the head of the screw and the wall.(Image C)

CONNECTION AND MOUNTING THE MIRROR
Plug in the mirror then place it against the wall while aligning the holes with the screws. If the power cord is too long, it can be hidden inside the recessed area in the back of the mirror. Then slide down as shown in image B.

CONTROLS

POWER BUTTON/ DIMMER

• Short press for light and defogger ON/OFF.
• Long press to adjust light brightness.

COLOR TEMPERATURE SELECTOR

• Short press for color temperature selection 2700K-4500K-6500K.
• Long press to gradually cycle through the options.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>