CHACON 84171 Style Anthracite Wireless Doorbell User Manual
- June 6, 2024
- CHACON
Table of Contents
Mode” button : 3 different modes
- If an audible “beep” is emitted and the LED does not light up, the receiver works with sound only.
- If a “beep” sound is emitted and the LED indicator lights up, the receiver will work with sound and LED flash.
- If the LED indicator lights up without a “beep” sound, the receiver will work with LED flash only.
Reset pairing
Press and hold the Learning Code button for approximately 3 seconds. The
receiver will emit 5 beeps, which means that the code
between the receiver and the transmitter has been cleared.
Caution: Do not open or repair the product.
The operating range may be affected by environmental factors and nearby
interference sources
Specification
| Power supply | Rx : DC 3V (2×1,5 AA) |
|---|---|
| Tx : DC 3V (1xCR2032) | |
| Working frequency | 433MHz |
| Transmitting power | ≤10mW |
| Operating range | 300M |
| Melody | 36 |
| Volume | 3-grade levels |
| Volume | >90dB |
| Max radio-frequency power | <20mW (EIRP) |
Chacon S.A.
Avenue Mercator 2 • 1300 Wavre
Belgium
| | Courant Continue (CC)| For indoor use only
---|---
Support
Hereby, Chacon, declares that the radio equipment type ‘84170-84171’ is in
compliance with the Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following Internet address: www.chacon.be-support-
downloads
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>