CHACON DiOBELL-B01 Wireless Connected Doorbell User Guide

June 5, 2024
CHACON

CHACON DiOBELL-B01 Wireless Connected Doorbell

CHACON DiOBELL-B01 Wireless Connected Doorbell
product

Package contents

Registering your warranty

To register your warranty, fill in the online form at www.chacon.com/warranty

Description of the product

Note
In order to reset the device, press and hold the reset button for 5 seconds.
The doorbell rings when the process is complete.

Installation instructions

CHACON DiOBELL-B01 Wireless Connected Doorbell
FIG 6

  1. Fix the battery cover to your wall using the screws provided
  2. Insert 4 AA batteries into your doorbellCHACON DiOBELL-B01 Wireless Connected Doorbell FIG 7
  3. Fix the doorbell to the battery cover
  4. Place the protection cover over the doorbell
  5. Use the fixing key and the screw provided to fix the elements into place.

Note
In order to reset the device, press and hold the reset button for 5 seconds. The doorbell rings when the process is complete.

Flashing red light (slow) Waiting for configuration
Flashing red light (fast) Searching for WiFi
Constant blue light Camera connected to WiFi
Flashing blue light Access point mode

Configuring the doorbell

  1. Adding the doorbell in the app
  2. Step 1 Connect your smartphone to the WiFi network
  3. Step 2 Download the DiO one app from the Apple Store or the Android
  4. Play Store, depending on your device.
  5. Step 3 Run the DiO one app and register when you use it for the first time.
  6. Step 4 Follow the steps described in the app to add your doorbell.

Note : Only Wi-Fi access point mode is available for the DIOBELL-B01, please follow the on-screen instructions for pairing.CHACON DiOBELL-B01
Wireless Connected Doorbell FIG 9
Note

  • If you have multiple doorbells, please repeat step 4 to add them one by one.
  • To change the WiFi network, restore the camera’s factory settings and follow step 4 to add the doorbell.
    For more detailed information, you can download the user manual from www.chacon.com

Pairing the chime
Step 1 Insert two AA batteries into the chime
Step 2 Press the button on your doorbell within 120 seconds

General Conditions of Sale and Use

Specifications

Wired doorbell

Lens type| 1 / 2.9’’ CMOS
Resolution| 2 megapixels
Lens:| 2.4 mm
View angle| 140°
Bandwidth| 16 Kbps ~ 2 Mbps
Aperture| 1 / 25 ~ 1 / 100,000 per second
Audio| Two-way
Minimum luminosity| 0.01 Lux@F1.2
Wi-Fi| 802.11b/g/n – 2,4GHz only
Wi-Fi encryption| WPA-PSK/WPA2-PSK
Security| AES128
Operating temperature| -20°C~50°C
Power supply| 4 AA batteries
Protocols| TCP/IP, HTTP, DHCP, DNS, RTSP
Size (mm)| 65 x 125 x 35
Protection rating| IP54
Max. Power| 73,62mW ERP
Wireless chime
Radio frequency| 433.92 MHz
Power supply| 2 AA batteries
Consumption in standby mode| £ 600 uA
Operating temperature| 0°C~35°C
Max. Power| 0,05mW ERP

Don’t throw batteries or out of order products with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.

Hereby, Chacon, declares that the radio equipment type ‘DiOBELL-B01 / DiOBELL-B02’ is in compliance with the Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following Internet address: http://chacon.com/conformity

Support

www.chacon.com/support

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals