MiBOXER WiFi LED Controller WL5-WP User Manual

Mi-light
Subordinate New Brand
Waterproof 5 in 1 WiFi LED Controller
Model No.: WL5-WP

Features

This product is a waterproof LED controller suitable for outdoor use. It has brightness, color temperature, RGB, RGBW, and RGB+CCT output modes. Built-in WiFi module and 2.4GHz RF communication module. Support Smartphone APP ( MiBoxer ) and RF Remote control.

Parameters

Model No.: WL5-WP
Input Voltage: DC12V~36V
Output: 6A/Channel
Total Output Max: 20A
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz
RF: 2.4GHz
Remote control distance: 30m
Working Temperature: -20~45℃

Function Instruction

Switching Output Mode
Short press the” SET ” button to switch the output mode; The indicating light flickering means switching successfully; Different colors flickering correspond to different output modes, details see below sheet.

Signal transmitting

One lighting fixture can transmit the signals from the remote control to another lighting fixture within 30m, as long as there is a lighting fixture within 30m, the remote control distance can be limitless.
Modes synchronization
The different lighting fixtures can work synchronously when they are started at different times, controlled by the same remote, under the same dynamic mode, and within 30m distance. Dynamic Mode Sheet
Note: only suitable for RGB/RGBW/RGB+CCT output mode.

Connect diagram

Controller input voltage must be in accordance with the required voltage of LED Strips.

Note: the connection method is different for different output modes. Please connect it according to the below sheet.

Output Mode                                    LED Wiring )

Mode             Wire| Black| Red| Green| Blue| White| Yellow
Single Color| V+| W| W| W| W| W
Dual White| V+| CW| CW| WW| WW|
RGB| V+| R| G| B| |
RGBW| V+| R| G| B| W|
RGB+CCT| V+| R| G| B| CW| WW

RF Remote Link / Unlink

Link:
1. Short press the ” Link/Unlink ” button once on the LED controller( or switch off the controller power. After 10 seconds, switch on again). The indicator light flashes red and green alternately.
2. Short press the Link/Unlink button on the remote (i.e. ” 1″ or “on “) 3 times within 3 seconds. The green light flashing 3 times slowly means linking successfully.
Unlink:
Long press the” Link/Unlink ” button on the LED controller for 3 seconds. The red light flashing 10 times quickly means unlink successfully. (Or follow the unlinking steps on the remote instruction.)
Note:
Remote controllers need to be purchased separately. For the remote linking and unlinking method, please see details on remote instruction. Compatible with these remote controls (Purchased separately)

MiBoxer APP Control

1. Long press “SET” three seconds, device go into wifi configuration mode when red indicator blinking.
2. Log in MiBoxer APP and click the ” + ” on the right top corner, then select “ Waterproof LED controller(WL5-WP)”.
Follow the hints to complete the device adding.
Indicating light instruction:

Red light always-on| Red light blinking| Greenlight always-on| Greenlight linking| Yellow light blinking
---|---|---|---|---
Disconnected
from network| Smart Link
mode| Networking
successfully| Received
signal| Device
malfunction

Attention

1. Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode.
2. Non-professional users cannot dismantle the controller directly, otherwise, it may cause fire and electric shock.
3. Please do not use a controller around the mental area and high magnetic field, otherwise, it will badly affect the control distance.

https://miboxer.com/light/video/wifi_2.html
Scan QR code to watch online video for WiF pairing
Made in China

MiBoxer APP User Instruction

APP Downloading
For IOS System: Pls search “MiBoxer” on the APP store. (Above IOS9.0)
For Android System: search “MiBoxer” on Google Play (Above
Android 5.0) or Scan the below QR-code to download APP.

https://www.futlight.com/app/1.html
Scan QR Code to Install APP

Register MiBoxer Account
Open APP and click the Register button; Complete the register and log in.

Add Device
1. Click the right top ” + ” on the device list.
2. Please select the device type you will add, then complete the adding according to the hint of APP.
3. Back to device list after adding successfully, then pull down refresh in the list to get the device status.

Modify device name or delete device
Slide device list to left, click ” Edit ” to modify device name; Click ” Delete ” to delete the device.
Note : If the device was shared with others, then the device will also be deleted from your friends’ device list.

Group Control
1. Click to switch to Group list, then click the right top icon on the Group list to create groups.
2. Slide the Group list to the left to Edit / Delete groups.
Note : The group just works on APP Controlling, cannot work on Voice control. Please open a third-party APP for Group Voice control.

APP Control
Click the device or group that you want to dim on the device list and group list into Dimming Interface.
S+Click speed+ under dynamic mode.
S-Click speed- under dynamic mode.

Third-Party Voice Control instructions
Search “Mi-Light Smart” on third-party platform APP and set up.
Click left top “ ” icon on the home page;
Then click “ ” Voice Control to check detailed instructions.
Sharing Device
Share the device with friends, Let your friends can control this device.
1. Click the left top ” ” icon on the home page.
2. Click ” ” to My sharing, then click”Add sharing”
(Note: the receiving sharing device cannot be shared again).
3. Click ” “jack@milight.com to edit sharing, slide to the left to delete sharing.
Shared Device Jack

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>