MiBOXER 5 IN 1 Smart LED Controller LS2 User Manual
- June 6, 2024
- MiBOXER
Table of Contents
MiBOXER 5 IN 1 Smart LED Controller LS2
Introduction
5 in 1 (Single Color&CCT&RGB&RGBW&RGB+CCT) smart strip controller is our newly developed high-end LED controller controlled by wireless remote controller, also with smartphone control and 4G long distance control (2.4GHz gateway is needed). The controller has auto-transmitting and auto-synchronizing function and with brightness, CCT, RGB, RGBW and RGB+CCT output mode. This controller adopt the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference,etc. One compatible remote control many controllers at the same time. Widely used on the controlling of hotel lighting and home lighting.
Indicating lamp showing instruction
| Indicating Lamp Color | Output Mode |
|---|---|
| White Light | Single Color Mode |
| Yellow Light | Dual White Mode |
| Red Light | RGB Mode |
| Green Light | RGBW Mode |
| Blue Light | RGB+CCT Mode |
Technical Data
Model No.: LS2
Working Temperature: -20~60°C
Input Voltage: DC12V~24V
Output: 6A/Channel
Total Output: Max 15A
Connection: Common anode
RF: 2.4GHz
Control Distance: 30m
Size: 1243823mm
Weight: 60g
Dimensions
Remote Controller
Lighting can be working after linking with remote; for more details, pls read the remote instruction.
Signal transmitting
One lighting fixture can transmit the signals from the remote control to another lighting fixture within 30m, as long as there is a lighting fixture within 30m, the remote control distance can be limitless.
Modes synchronization
Different lighting fixture can work synchronously when they are started at
different times, controlled by the same remote, under same dynamic mode and
within 30m distance.
Dynamic Mode Sheet
Number
| Dynamic Mode|
Brightness / Saturation / Speed
---|---|---
1
| Mardi gras|
Adjustable
2|
Automatic color change
3
| Sam
4|
Gemstone
5
|
Twilight
6
|
American
7
|
Fat tuesday
8
|
Party
9
|
Slow color splash
Controller connect to LED strip diagram
Attention
-
Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be broken.
-
Please don’t connect wires with power on.
Please turn on again only when it is in right connection and no short circuit. -
Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected .
Controller not suitable for use under moisture
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>