Mi-Light FUT095 RGBW Remote User Manual
- June 6, 2024
- Mi-Light
Table of Contents
RGBW Remote
Model No.: FUT095 / FUT096
Features
This manual describes two types of remote controls used for our RGBW product. Both of them have the same functions but different designs. The product adopt worldwide used 2.4GHz frequency, GFSK control method, with the features of low power consumption, long-distance transmitting, strong anti-interference, and fast communication rate. Adopt high-precision touching IC Touching is more stable and sensitive, can control specified Mi-Light / MiBoxer smart light with color, color temperature, saturation, and brightness changing.
Parameters
Product Name: RGBW remote ( with buttons )
Model No.: FUT095
Voltage: 3V(AAA 2PCS)
Transmission Frequency: 2.4GHz
Modulation Method: GFSK
Transmitting Power: 6dBm
Standby Power Consumption: 20uA
Control Distance: 30m
Size: 52.521*120mm
Product Name: RGBW remote ( Full Touch )
Model No.: FUT096
Voltage: 3V(AAA 2PCS)
Transmission Frequency: 2.4GHz
Modulation Method: GFSK
Transmitting Power: 6dBm
Standby Power Consumption: 20uA
Control Distance: 30m
Size: 52.521*120mm
Products Key Diagram
Remark: Hold ” ” to get white mode. Under white mode, press ‘S-’ to get warm white, press ‘S+’ to get cool white. Under color mode, press ‘S+/S-’ for saturation control. When pressing ‘M’, S+/S- can adjust the speed of the dynamic modes. To dim all RGBW lights at once or change the color, frist press “Master ON”. to do this with individual lights, first press “Zone ON”. secondly, choose the color or brightness according to the color ring or brightness ring.
Linking&Unlinking
Remark : The light can be working after linking with the remote.
Linking Instructions
1 . Switch off the light, after 10 seconds switch on again
2. When the light is on, short press any zone of ” ” 3 times within 3 seconds
3 . The light blinks 3 times slowly means the linking is done successfully.
If the light did not blink slowly, the linking failed, Pls switch off the light again, and follow the above steps again.
Unlinking Instructions
1. Switch off the light, after 10 seconds switch on again
2. When the light is on, short press ” ” 5 times within 3 seconds Unlinking
must be the same zone with the Linking
3. The light blinking 10 times quickly, means the unblinking successfully.
If the light does not blink quickly, the unlink failed, pls switch off the light again, and follow the above steps to unlink again.
Grouping of several lights
You can add an endless number of lights to a zone on the 4 channel remote by
linking the lights to different zones. This way you are completely flexible in
creating different group combinations. Below you can see some grouping
examples.
Remark:
- The user can re-program freely as needed. One remote can control countless lamps or controllers, but one lamp or controller can only be controlled by four remotes ( Max
- Please check the battery installation and controller ( totally discharge the power ), when you program after switching off and switching on.
Attention
- This remote only controls specified Mi-Light / Miboxer products; not all Mi-Light / Miboxer series can work on this remote.
- In the use of the remote, if the indicated lamp blinking quickly, pls change the battery in time. Pls, don’t use poor-quality batteries to avoid leaking battery liquid to damage the remote.
- This 2.4GHz remote is a precise electronic product; don’t use it in humid, high temperature, dust, and high voltage environment; Saving it at indoor, dry, and no static electricity environment.
- Pls don’t use the remote on the wide-range metal or strong electromagnetic wave area, otherwise, it will badly affect the controlling distance.
Made in China