Mi-Light FUT096 RGBW LED Remote Controller User Guide
- June 5, 2024
- Mi-Light
Table of Contents
Mi-Light FUT096 RGBW LED Remote Controller
RGBW Remote
Model No.: FUT096
Features
This manual describes two types of remote cont「ols used for our RGBW product.
Both of them have same functions but different design. Product adopt wo「Id-
wide used 2.4GHz f『equency, GFSK control method, with the features of low
power consumption, long distance transmitting, strong anti-interference and
fast communication rate. Adopt high-precision touching IC Touching is more
stable and sensitive, can control specified M山ght / MiBoxer smart light with
color, color temperature, saturation and brightness changing Product Name:
RGBW remote ( Full Touch ) Model No.: FUT096
Voltage: 3V(A邸• 2PCS)
T『ansmission Frequency: 2.4GHz Modulation Method: GFSK
Standby Power Consumption: 2DuA Control Distance. 30m
Size: s2s21•12omm
Products Key Diagram
Remark: Hold’I’to get white mode. Under white mode, press’S-‘to get warm
white, press’S+’to get cool white. Under color mode, press’S+/S-‘for
saturation control. When press ‘M’, S+/S- can ad1ust the speed of the dynamic
modes
To dim all RGBW lights at once or change the color, frist press “Master ON”.
to do this with individual lights, frist press “Zone ON”. secondly, choose the
color or brightness acco「ding to the color ring o『 brightness ring
Linking &Unlinking
Remark: The light can be working after linking with the remote.
Linking Instructions
- A\ If the light does not blink slowly, the linking failed, Pis switches off the light again, and follows the above steps again.
Unlinking Instructions
A\ If the light not blinks quickly, the unlink failed, pis switch off the light again, and follow the above steps to unlink again.
Grouping of several lights
You can add an endless number of lights to a zone on the 4-channel remote by
linking the lights to different zones. This way you are completely flexible in
creating different group combinations. Below you can see some grouping
examples.
Remark:
- The user can re-program freely as needed. One remote can control countless lamps or controllers, but one lamp or controller can only be controlled by four remotes ( Max ).
- Please check the battery installation and controller ( totally discharge the power ), when you programme after switching off and switching on.
Attention
- This remote only control specified Mi-Light/ Mi boxer products; not all Mi-Light/ Miboxer series can work on this remote.
- In the using of the remote, if the indicated lamp blinking quickly, pis change the battery in time. Pis don’t use poor quality battery to avoid the leaking of battery liquid to damage the remote.
- This 2.4GHz remote is precise electronic product; don’t use it in humid, high temperature, dust and high voltage environment; Saving it at indoor, dry and no static electricity environment.
- Pis don’t use the remote on the wide-range metal or strong electromagnetic wave area, otherwise, it will badly affect the controlling distance.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio{TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.