Mi-Light FUT090 Remote Control for LED Tracklight Instruction Manual

June 6, 2024
Mi-Light

Mi-Light - logo User Instruction
Remote Control for LED Tracklight

Model No.: FUT090

Features

With the widely used 2.4Ghz radio frequency &GFSK method, this remote control has the features of low power consumption, long-distance control, anti- interference, and high communication speed. You can save the current status of the track light as a mode, with the LCD screen, you can see the color rate, kelvin, saturation rate, brightness clearly. One remote can control many track lights at the same time or individually, totally up to 99 zones.

Mi-Light FUT090 Remote Control for LED Tracklight -
Features

Parameters

Model No.: FUT090 Frequency: 2400-2483.5MHz
Mode: GFSK Power Consumption: 5.5dBm
Voltage: 4.5V (AAA *3PCS) Standby Current: 30uA
Control Distance: 30m Size: 200mm72.8mm18.4mm

Functions

• SHIFT ( Switch key for individual and group of track lights )

  1. SHIFT is a switch key used for choosing individual track lights or groups of track lights.
  2. Hold any of the number keys, when it shows ‘—-’, you are ready to choose any individual track light by typing in its 4 digital ID numbers on the remote. E.g. when you press 1111, the track light with ID number 1111 is chosen.
  3. Press SHIFT once holds any of the number keys, when it shows ‘CH–’, you are ready to choose any group of track lights by typing in their group number on the remote. E.g. when you press 20, the track lights in CH20 are chosen.

• EDIT ( Edit key for grouping the track lights )
How to Eidt the Groups:

  1. Link the track light with the remote control( see below 4. Link &Unlink)
  2. Edit the numbers shown on the remote screen in accordance with the corresponding track light( Each track light has a 4 digital ID number on it)
  3. Press ‘Edit’ on the remote control, enter the Group Editing Mode, on the remote control, it shows on the track light, it shows ‘CH–‘), press the numbers on the remote control, e.g.61, the track light will be grouped into group 61.
  4. Press any key on the remote control (except for the number keys) to stop editing.
    There are no more than 99 groups, and each group can have limitless numbers of track lights.
    Note: You can control all the linked track lights when you change to ‘CHOO’on the remote control screen.

• S ( Save or Choose the Mode )
‘Mode’: You can save and choose RGB color, kelvin, brightness, saturation rate, and the direction of the track lights.
How to save:

  1. Press ‘s’ and then ’01, the track light will locate itself.
  2. Adjust the mode which you want to save
  3. Hold ‘S’ when you see ‘Save’ blinking on the screen.
  4. Press any number key from 1-9, ‘Save’ will stop blinking, the mode will be saved on which key you pressed.

How to choose the mode which you saved:

  1. Press ‘S’ when you see ‘Select’ blinking on the screen.
  2. Press the number key which you have saved before, ‘Select’ will stop blinking, the model which you have saved on this key will show. M ( Choose dynamic modes or Adjust the directions )

How to choose dynamic modes:
Press ‘M’, ‘Mode’ will be blinking on the bottom left of the remote control screen, ‘Motor’ will be shown on the bottom middle of the screen.
Now you can start choosing the 9 dynamic modes by pressing the number key from 1-9, ‘Mode’ will stop blinking and ‘Motor’ will disappear.

How to adjust the directions:
Press ‘M’, ‘Mode’ will be blinking on the bottom left of the remote control screen, ‘Motor’ will be shown on the bottom middle of the screen.
Now you can also change the directions of the track lights, up and down, left and right, ‘Mode’ will stop blinking and M the icon will show up along with ‘Motor’

  • Link: Switch off the power of the track light, switch on again, press the ‘ON’ button on the remote control 3 times within 3 seconds, ON/OFF is also shown on the bottom left of the LCD screen, the link is done when the green light blinks three times.
  • Unlink: Switch off the power of the track light, switch it on again, press the ‘ON’ button on the remote control 5 times within 3 seconds, ON/OFF is also shown on the bottom left of the LCD screen, the unlink is done when the red light blinks 10 times.

Made in China

Documents / Resources

| Mi- Light FUT090 Remote Control for LED Tracklight [pdf] Instruction Manual
FUT090, Remote Control for LED Tracklight
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals