DOAGEAS B83 Bluetooth Speaker with Wireless Charger Instruction Manual
- June 6, 2024
- DOAGEAS
Table of Contents
DOAGEAS B83 Bluetooth Speaker with Wireless Charger
BASIC INFORMATION:
- Wirelesscharger
- Micro USB input
- ON/OFF button
- AUXinput
INCLUDES: USB/micro USB to charge the battery, and jack cable 3.5mm.
TECHNICAL CHARACTERISTICS:
- Functions: bluetooth, wireless charging and AUX mode
- Material:ABS
- Size:107x57x54mm
- Signal range:10m
- Outputpower:3W
- Frequency range: 2402 MHz-2480MHz
- lmpedance:40
- Battery: Polymer 300mAh
- Playtime:2h
- Battery charging time:1h30
INSTRUCTIONS FOR USE:
- To turn the speaker on, slide the ON/OFF button (located on the back of the productl
- search for the corresponding pairing name on your mobile phone and click to pair;
- connect your device directly to the speaker, insert an AUX cable into your device and into the AUX input [4];
- charge the speaker, connect the USB/micro USB cable to the Micro USB port [ 2] and to a power source;
- ontrolthe speakervolume using your device.
WARNING!
- Keep the device away from sources of heat and moisture.
- The battery duration mayvary depending on the speakerusage.
- To protect your hearing,do not use high volume for long periods.
- lt is recommended thatyou fully charge the device before itsfirst
USE
- Clean the device with a slightly damp cloth, with no abrasive products thatcoulddamageit.
Safety Warning :
ln order to prevent conditions thatcan lead to overheating, please
makesurethatthe wireless charging pad surface is freeof all metal objects at
all times,such as coins or paper clips.ln addition.before charging,please
removeanythingmetallic attached to the back of the phone,such as battery
cases, ring holders, or plates used for mouting to magnetic phoneholders.
FCC Statement：
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.The distance between user and products should be no less than 20cm