gofanco KVMDP-4P 4-Port DP 1.4 KVM with USB 3.0 User Guide
- June 3, 2024
- gofanco
Table of Contents
gofanco KVMDP-4P 4-Port DP 1.4 KVM with USB 3.0
Instruction
Thank you for purchasing from gofanco. Our products aim to meet all your
connectivity needs wherever you go. For optimum performance and safety, please
read the instructions carefully and keep this User’s Guide for future
reference. If you need more information about our products, please visit
www.gofanco.com. For technical support, email us at
support@gofanco.com. For drivers or manual
download, please go to
www.gofanco.com/downloads.
Important Safety Notices
Please read safety instructions carefully before installation and operation.
-
Please pay close attention to all warnings and hints for this device
-
Do not expose this unit to rain, heavy moisture, or liquid
-
Do not put any items into the device or attempt to modify its operation
-
Do not repair the device or open the enclosure without professional guidance to avoid electric shocks. Doing so may void your warranty
• Keep the product in a well-ventilated location to avoid damage from overheating -
Shut off power and make sure environment is safe before installation
-
Do not plug the HDMI or DisplayPort cables in/out when the device is in use to avoid cable damage. Make sure they are plugged into the correct ports
-
Use the included power adapter only. Make sure the specification matches if using 3rd-party DC power adapters
Introduction
The 4-Port DP 1.4 KVM with USB 3.0 allows you to control four 4K computers using one set of keyboard, mouse, microphone, speaker, and display.
Features
- 4-Port KVM Switch with the latest DisplayPort 1.4 (Video), USB Keyboard/Mouse, with Stereo Out and Mic In. Supports either DisplayPort or HDMI output
- DisplayPort 1.4 and HDCP 2.2/1.4 compliant
- Supports up to 4K(3840×2160 & 4096×2160) @60Hz, HDR, 3D
- Includes a 2-port USB 3.0 hub
- KVM Switching: IR remote, push buttons, and keyboard hotkeys
- Simple plug-n-play installation without additional driver installation
Installation Requirements
- DisplayPort computers
- DisplayPort or HDMI display
- DisplayPort and/or HDMI cables (not included)
- USB A to B cables (included)
- Audio cables (not included)
- Microphone cables (not included)
Package Contents
- 4-Port DisplayPort KVM
- USB cable (4pcs)
- IR remote control
- IR receiver cable
- Power adapter (Output: 5V/3A)
- User’s guide
Product Layout
-
Power Button: Press to turn the KVM on and off
-
Power LED: Lights up when KVM is powered on
-
Input Selection:
PC1 – PC4: Source device selection button
Select LED (PC1-PC4): On – the corresponding PC is selected; Blinks – Auto- switching mode is enabled Online LED (PC1-PC4): On when USB port is connected to the corresponding PC -
IR Ext: Connects to the included IR Receiver cable. Receives signals from the included remote control
-
IR Receiver: Receives signals from the included remote control
-
Microphone Input: Connects to your Microphone
-
Audio Output: Connect to speakers or headphones
-
USB 3.0 Ports (x2): Connects to your USB devices
-
Output Ports:
- USB port: Connect to keyboard or mouse
- USB port: Connect to keyboard or mouse
- Audio jack: Connect to speakers or headphones
- Microphone jack: Connect to your Microphone
-
PC1 Inputs: Connects to PC1’s DisplayPort output, USB 3.0 port, microphone input jack, audio output jack
-
PC2 Inputs: Connects to PC2’s DisplayPort output, USB 3.0 port, microphone input jack, audio output jack
-
PC3 Inputs: Connects to PC3’s DisplayPort output, USB 3.0 port, microphone input jack, audio output jack
-
PC4 Inputs: Connects to PC4’s DisplayPort output, USB 3.0 port, microphone input jack, audio output jack
-
Power Jack: Connects to the included power adapter
Hardware Installation
Front Panel Connection
- Connect your microphone and speaker/headphone to the corresponding jacks of the KVM (optional).
- Connect your USB device(s) to the USB ports (optional).
- Connect the included IR Receiver cable to the IR Ext port. This connection is optional and needed only if the embedded IR receiver window is blocked from receiving IR signals.
Rear Panel Connection
- Connect your HDMI or DisplayPort display to the corresponding video output connector (HDMI and DisplayPort cables are not included). Note: Only one display can be used at a time. If connecting both DisplayPort and HDMI displays, the video signal is output to the DisplayPort display.
- Connect your keyboard and mouse to the keyboard and mouse USB ports of the KVM.
- Plug the DisplayPort, microphone, and speaker connectors of the KVM into their corresponding sockets on PC1 (cables not included).
- Plug the included USB cable between the KVM and PC1.
- Repeat steps 3 and 4 for PC2, PC3, and PC4.
- Plug the included power adapter into the KVM’s power jack, then plug the power adapter into a reliable power outlet.
- Power on all connected devices.
Connection Diagram
The application diagram shows the most typical input and output devices used with the KVM.
Operating Instructions
PC Switching
There are three ways to switch between the computers, manual push button,
keyboard hotkey, and IR remote control.
Manual Push Button
Press the front panel switch button to switch between the connected computers.
Keyboard Hotkey
Works with PC keyboard connected to USB-A ports on the back panel. Note: Mac
keyboards do not support keyboard hotkey function due to lack of Scroll Lock
key.
Remote Control
Special Functions
Mouse
Place the mouse cursor on the far right of the display then move the cursor to
the right for 2 seconds, the KVM switches to the next PC. Switching order: PC1
PC2 > PC3 > PC4.
USB Detection
When a PC is connected the KVM’s USB-B port the KVM automatically switches to
it.
Auto Switching
When the current active PC is powered off, the KVM automatically switches to
the next active PC.
Specifications
Disclaimer
The product name and brand name may be registered trademarks of related
manufacturers. TM and ® may be omitted on the user’s guide. The pictures on
the user’s guide are just for reference, and there may be some slight
differences with the actual products.
We reserve the right to make changes without prior notice to a product or
system described herein to improve reliability, function, or design.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>