bewwllo BW2041 Christmas Tree Train User Manual

bewwllo BW2041 Christmas Tree Train

Christmas tree train – plays music, lights – battery operated

Make your Christmas tree unique and special with this tree-mounted train. You can fasten the train rails to any pole, trunk, pine with a clamping device. The locomotive lights up, rumbles, a magical experience for the whole family as it disappears among the ornaments of the pine tree, pulling the wagons and Santa’s sleigh. Assembly does not require expertise, can be assembled in a few minutes, the 4 batteries ensure long-lasting operation.
It can even be used around the Christmas tree base without the mounting structure fitted.

• Special Christmas train
• Unique Christmas tree decoration
• Light and sound effect
• Santa figure
• Shiny, ornate locomotive
• Wireless, battery operation
• A Phillips screwdriver is required for assembly

Product Specification

• Power supply: 4 x AA 1.5V battery (not included)
• Light: red LED
• Sound effect: train sound
• Installation diameter (pole): 3 – 7 cm
• Track diameter: Ø 88 cm
• Number of wagons: 3 pcs + locomotive
• Train size: 60 x 8 x 5 cm
• Protection: IP20
• Material: plastic
• Color: black, red, green, white, gold

COMPONENTS

WARNINGS

• The manufacturer and distributor are not liable for any damage resulting from incorrect assembly or improper use!
• After assembly and fixing, check that no objects (Christmas tree decoration, pine branch…) obstruct the movement of the train on the track!
• The railway set is not a game! Keep out of reach of children!
• Use for decorative purposes only!
• It is forbidden to disassemble or modify the product!
• In the event of a malfunction, consult an electronics technician.
• Remove the batteries from the product when not in use for an extended period of time!

INSTALLATION

1. Insert batteries: Use a Phillips screwdriver to remove the top of the charcoal cart (B), which is also the battery cover. Insert 4 identical 1.5V AA batteries into the device. Make sure the polarity is correct when inserting the batteries. After inserting the batteries, place the battery cover back.
   

2. Check that the slide switch on the right side of the locomotive (A) is in the „OFF” position. Use the hook to connect the coal car to the locomotive, then connect the DC power cable between the coal car and the locomotive. This ensures the energy supply to the locomotive. You can attach additional carriages (C-D) using hooks.
   

3. Assemble the rail track (E) to obtain a continuous circular track. When connecting the rails, make sure that they fit exactly. If you want to use the product on the ground (around the Christmas tree), place the railroad cars on the rail and turn on the product. If you want to fix the track to artificial pine, set the finished track aside for a while while assembling the cantilever section.
   

4. Assemble the trunk mounting bracket! Place the stabilizers (H) on one side of the ring, then place the two-piece retaining ring (G) around the trunk of the tree and fit them together so that they snap together. Attention! Position the bracket with the stabilizers on the bottom. Fasten the rings at the connection points with 4 screws (J – 20 mm).
   

5. Attach the bracket to the pine trunk using the four long screws (K – 60 mm) provided. Tighten the opposite screws at the same time. Tighten the screws firmly, but do not overtighten, making sure the plastic parts are intact. Verify that the console cannot move away from the trunk.
   

6. Now secure the levers (F) connecting the bracket and the rail track. Align the elements from above with the appropriate part of the ring so that the arms are up and out, ready to receive the previously assembled track. Once all 8 levers have been secured, place the two-sided ring (I) at the base of the arms to prevent the arm from falling out of place.
   

7. Place the rail track on top of the arms and snap the track under the mounting tab on the top of the arms. We recommend that you hook up the inner tab first and then push the outer one onto.
   

8. Place the trains on the track, make sure all wheels are on top of the rail, then turn on the locomotive. As a precaution, stay close to the train during the first few laps to avoid possible damage.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>