Mi Light SYS-T2 1-Channel Signal Power Amplifier Instructions
- June 6, 2024
- Mi-Light
Table of Contents
SYS-T2 1-Channel Signal Power Amplifier
Instructions Manual
Features
The amplifier is to amplify the power and signal for the “SYS-T1 1-Channel Host Controller”. It can amplify the signal from the “SYS-T1 Controller” to connect more LED lamps, and synchronously control more lamps. When you add one more amplifier, you can connect double LED lamps.
Parameters
| Model No.: SYS-T2 | Output Voltage: DC24V |
|---|---|
| Input Voltage: DC24V | Output Current: Max 15A |
| Working Temperature: -20~60 ℃ | Output Power: Max 360W |
| Product Weight: 67g |
Connection Instruction
Note
When using the “SYS-T1 controller”, you need again to add the “SYS-T2
1-channel signal amplifier” for the below 3 situations.
- Connecting over 50pcs lights.
- Connected cable length over 300m.
- Output power over 360W.
Note ：
- All connected lights to the “SYS-T2 1-Channel signal power amplifier” cannot be over 360W, otherwise, it will damage the controller.
- The wiring method, please see details for the SYS series instructions.
Attention
- Please check whether the input voltage is in accordance with the controller’s working voltage, and please check the connection of both the cathode and anode.
- The working Voltage is DC24V, the controller will be broken if the voltage is higher than 24V.
- Non-professional users cannot dismantle the controller directly, Otherwise, the controller may be broken
- The working temperature is -20~60℃; Do not use the device to direct sunlight, moisture, and another high-temperature area.
Made in China
Documents / Resources
| Mi
Light SYS-T2 1-Channel Signal Power
Amplifier
[pdf] Instructions
SYS-T2, 1-Channel Signal Power Amplifier
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>