TROX TNC-DP One Profibus DP Connector Owner’s Manual
- June 16, 2024
- TROX
Table of Contents
TROX TNC-DP One Profibus DP Connector
Product Information
Specifications
- Terminal resistor
- Integral resistor can be set using the slide switch
- Transfer rate: Max. 12 Mbit/s
- Cable routing: PROFIBUS component
- SUB-D socket, 9-pole
- PROFIBUS bus cable
- Ambient temperature
- Storage temperature
- Relative humidity
- Protection level: IP 20
- Standard description (characteristics): One PROFIBUS DP connector per AS-i DP controller and DP master system (display)
Product Usage Instructions
Step 1: Preparation
Before connecting the TNC-DP connector, ensure that you have the necessary tools and materials:
- TNC-DP connector
- TNC-A4000 flat cable (100 m)
- TNC-70381 flat cable distributor
- TNC-70413 end seals (10 pieces)
- TNC-70113 heat shrink caps (10 pieces)
- TNC-70067 cable clips for flat cables (100 pieces)
Step 2: Assembly
Follow these steps to assemble the TNC-DP connector:
- Insert the TNC-A4000 flat cable into the TNC-DP connector.
- Make sure the cable is securely inserted and locked in place.
- Use the TNC-70381 flat cable distributor to distribute the cable if needed.
- Apply the TNC-70413 end seals to ensure proper insulation.
- If required, use the TNC-70113 heat shrink caps to further secure the connection.
- Use the TNC-70067 cable clips to organize and secure the flat cables.
Step 3: Connection
Connect the TNC-DP connector to the PROFIBUS bus by following these steps:
- Locate the PROFIBUS controller or display.
- Insert the TNC-DP connector into the appropriate port of the controller or display.
- Ensure a secure and proper connection.
Step 4: Configuration
If necessary, set the integral resistor using the slide switch on the TNC-DP
connector. Refer to the user manual of your specific controller or display for
more information on resistor configuration.
Frequently Asked Questions (FAQ):
Q: What is the transfer rate of the TNC-DP connector?
A: The TNC-DP connector supports a maximum transfer rate of 12 Mbit/s.
Q: What is the protection level of the TNC-DP connector?
A: The TNC-DP connector has a protection level of IP 20.
Q: Can I use the TNC-DP connector with any PROFIBUS controller or
display?
A: Yes, the TNC-DP connector is compatible with any PROFIBUS controller
or display.
PACKAGE CONTENTS
TNC-DP
ONE PROFIBUS DP CONNECTOR PER ASI DP CONTROLLER AND DP MASTER SYSTEM
(DISPLAY).
All products are of high quality and meet the requirements of AS-Interface
- Asymmetrically shaped cable to ensure error-free connection (reverse voltage protection)
- Easy wiring due to flat cable insulation displacement connectors (‘click and go’)
- Protection level up to IP 67
Application
- For the connection of a PROFIBUS controller or display to the PROFIBUS bus
- Easy assembly
- With terminal resistor
TECHNICAL INFORMATION
| Description | TNC-DP connector |
|---|---|
| Supply voltage | 4.75 **– 5.25 V DC (to be provided by the terminal |
unit)
Terminal resistor| Integral resistor can be set using the slide
switch
Transfer rate| Max. 12 Mbit/s
Cable routing| 35° angle
PROFIBUS component| SUB-D socket, 9-pole
PROFIBUS bus cable| 4 rail mount terminals for wires up to 1.0 mm²
Ambient temperature| 0 – 60 °C
Storage temperature| –25 to 80 °C
Relative humidity| Max. 75 % at 25 °C
Protection level| IP 20**
Standard description (characteristics)
One PROFIBUS DP connector per AS-i DP controller and DP master system
(display).
- Supply voltage: 4.75 – 5.25 V DC (must be provided by the terminal unit)
- Cable routing: 35° angle
- Ambient temperature: 0 – 60 C°
- Protection level: IP 20
- Make: TROX GmbH or equivalent
- Type: TNC-DP Stecker
Useful additions
- TNC-A4000 Flat cable (100 m)
- TNC-70381 Flat cable distributor
- TNC-70413 End seals (10 pieces)
- TNC-70113 Heat shrink caps (10 pieces)
- TNC-70067 Cable clips for flat cables (100 pieces)
- TNC-DP connector
References
- WELKOM - BIENVENUE | S.A. TROX Belgium/TROX Belgium N.V.
- Contact | S.A. TROX Belgium/TROX Belgium N.V.
- GENERAL PURCHASING CONDITIONS | S.A. TROX Belgium/TROX Belgium N.V.
- Products | S.A. TROX Belgium/TROX Belgium N.V.
- Fire and Smoke Protection | S.A. TROX Belgium/TROX Belgium N.V.
- Delivery and payment terms TROX GmbH | S.A. TROX Belgium/TROX Belgium N.V.
- Disclaimer | S.A. TROX Belgium/TROX Belgium N.V.
- Imprint | S.A. TROX Belgium/TROX Belgium N.V.
- OUR DATA PROTECTION POLICY | S.A. TROX Belgium/TROX Belgium N.V.
- TNC-DP | S.A. TROX Belgium/TROX Belgium N.V.
- TROXNETCOM AS-I - AS-I INSTALLATION SET | S.A. TROX Belgium/TROX Belgium N.V.
- TROXNETCOM AS-i | S.A. TROX Belgium/TROX Belgium N.V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>