Mi-Light RGB+CCT LED Wall Washer Light SYS-RL1 User Manual
- June 6, 2024
- Mi-Light
Table of Contents
Mi-Light RGB+CCT LED Wall Washer Light SYS-RL1 User Manual
This product has to be connected to “SYS-T1 Controller” to fulfill the remote controlling.
Features
The light housing is made of aluminium alloy with anodizing technology on the surface, and stalinite mirror surface with high light transmittance. Connecting with “SYS-T1 Controller” to control the 16millions color, color temperature, brightness and saturation. Widely used on building, bridge, showcase, and landscape, etc.
-
RGB+CCT
16 Millions of colors to choose -
Color temperature
2700K~6500K -
*Beam Angle 1560°**
Illumination distance Greater than 15m -
Dimmable
Saturation control -
Waterproof and dustproof
grade IP66grade IP66
Parameters
- Model No.: SYS-RL1
- Input Voltage: DC24V
- Power: 24W
- Working Temperature: -20~60℃
- Color temperature: 2700~6500K
- Luminous Flux: 1800LM
- Light Efficiency: 75LM/W
- CRI: >80
- Lifespan: 50000h
- Beam AngIe: 15*60°
- lllumination distance: >15m
- IP Rate: IP66
- Product Weight: 2.39kg
- Housing Material: Die-cast aluminum, stalinite
Installation Diagram
-
Select the installation place, and fix the bas
-
Fix the lamp body on the base, and rotate the screws.
-
Adjust the illuminating angle, and tighten the screws.
Connection Diagram
Note: The “SYS-T1 Controller” has to be purchased separately.
Note: When using “SYS-T1 controller”, you need to add “SYS-T2 1-channel signal amplifier” for below 3 situations.
- Connecting over 50pcs lights.
- Connected cable length over 300m.
- Output power over 360W
All connected lights to “SYS-T1 Controller” cannot be over 360W, otherwise, it will damage the controller.
Attention
- When installation, Please switch off power, and switch on power after assuring the correct wiring.
- The light is with waterproof and damp-proof design. Waterproof rate is IP66; it can be working normally in the rain, but cannot work under water.
- The working temperature is -20~60℃, please do not install the light on the area over 60℃ to assure the lifespan.