Mi-Light PUSH2 2.4GHz Wireless RGB CCT Dimming Instruction Manual
- June 6, 2024
- Mi-Light
Table of Contents
Mi-Light PUSH2 2.4GHz Wireless RGB CCT Dimming
Features
MiBoxer Wireless Dimming features an easy connection to the PUSH switch, eliminating the need for tedious installation steps. Easily implement wireless dimming with existing MiBoxer / Mi-Light 2.4G series lamps. The control distance is 30 meters, supports controlling multiple MiBoxer /Mi-Light 2.4G series lamps, and supports controlling the color, color temperature, brightness, and switch of the light through the PUSH switch.
- CR2032 battery powered
- No wiring is required, and an easy-to-implement PUSH switch to wirelessly control the color, CCT, brightness, and switch of lights.
- Compatible with MiBoxer / Mi-Light 2.4G series lamps.
- Using 2.4G RF wireless transmission technology, the control distance is 30 meters, and the number of lamps is unlimited.
- Supports 4096 levels of smooth dimming, the lowest brightness is 0.1%.
- Dimming range: 0-100%
Product Parameters
Connection diagram
Install batteries
Linking Code Instructions
- Power off, then power on again after 10 seconds
- Short press the “SET” 3 times within 3 seconds
- The lamp flashes slowly 3 times, indicating successful linking
If the lamp does not flash slowly, the code binding failed, please re-perform the above steps. (Note: Already coded lamps cannot be coded again)。
Unlinking Code Instructions
- Power off, then power on again after 10 seconds
- Short press the “SET” 5 times within 3 seconds
- The lamp flashes quickly 10 times, indicating successful unlinking
- If the light does not flash quickly, the code clearing failed, please perform the above steps again. (Note: Already coded lamps cannot be coded again)。
Dimming control
ON/OFF/Brightness
Short press to turn on/off the light, long press to adjust the light
brightness.
CCT
Short press to switch to white light, long press to adjust color temperature.
RGB
Short press to switch to colored light, long press to adjust the light color.
Notice
- Please do not use it in a humid or high-temperature environment for a long time. When not in use for a long time, please remove the battery and store it in a dry, static-free environment.
- Do not use it in an environment with a large area of metal or near strong electromagnetic waves, otherwise the control distance will be seriously affected.
Specifications
- Product Name: 2.4GHz Wireless Dimming (RGB+CCT)
- Model No.: PUSH2
- Input Voltage: 3V CR2032*1PCS
- Transmitting Power: RF 6dBm 2.4GHz
- Control Distance: 30m
- IP Rating: IP20
- Working Temperature: -10~40°C
- Standby Power Consumption:
Frequently Asked Questions (FAQ)
Q: Can I control different MiBoxer / Mi-Light 2.4G series lamps
individually using the PUSH switch?
A: Yes, you can control multiple lamps individually by pairing each lamp
with a separate PUSH switch button within the 30-meter control distance.
Q: How do I reset the wireless dimming system if needed?
A: To reset the system, press and hold the reset button on both the device
and the PUSH switch simultaneously for 5 seconds until the LED indicators
blink rapidly.