QCY T1 True Wireless Earbuds User Manual
- June 6, 2024
- QCY
Table of Contents
QCY T1 True Wireless Earbuds User Manual
Overview
Choose EarTips
It is recommended you try middle EarTips first they fit most people.
(For first time pairing)
Take out both two EarBuds then re-insert them into the case to activate the earphones
Notes: If EarBuds fail to be charged, please charge the case via USB cable(for details, please refer the following step).
How to Pair
Push both EarBuds into charging case to activate them then take out from the case and they will auto power on and pair with each other. Right EarBud will auto enter pairing mode when LED on left EarBud turns off. On cellphone, search for QCY-T1_R and tap to connect cellphone to both EarBuds.
(Please try the following steps, in case you fail to build connection.)
Power off two EarBuds and tap and hold MFBs on both of them for 20s (LED will blink red and white then turn off and 10s later blink red and white 3 times). Tap and hold two EarBuds for 1s to power on(LED blinks red white twice) and two EarBuds will auto pair with each other. Then right EarBud will auto enter pairing mode(LED blinks red and white) when LED on left EarBud turn off. On cellphone, search for QCY-T1_R and tap to connect both EarBuds with cellphone.
Notes: if two EarBuds fail to pair with each other in 20s, they will enter pairing mode(connectable to cellphone).
Functions
Power-on
Method 1: take earphones out from the charging case and they will auto
power on(LED glows solid white).
Method 2: power off earphones and hold MFB for 1s to power on(LED glows
solid white).
Power-off
Hold MFB for 3s(red LED will turn on for 2s).
Ignore Call
Hold MFB for 1s to ignore incoming call.
Answer Call
Tap MFB to answer incoming call and tap again to end it.
Switch Audio Output
When calling, hold MFB for 1s to switch audio output between cellphone and
earphones.
Mute-on/off
When calling, double tap MFB to switch mute on/off.
Playback/pause
When standby in stereo mode, tap MFB to play and tap again to pause.
Skip Track Forward/backward
When playing, double press MFB on right/left EarBud to skip track
forward/backward.
Voice Assistant
When standby, hold MFB for 1s to activate voice assistant (like Siri).
The Following Functions Can Only be Enjoyed in Mono Mode
Single EarBud Re-connection
Power on single EarBud(LED will turn on white), tap MFB to re-connect to the
last device in connection records, if any.
Charge the Earphones
Insert the earphones into charging case(pogo pins should be well-contacted).
LED will be solid red when charging and turn to white for 60s once topped up
Charge the Case
Please charge the case via USB cable.
LED glows solid green when the case is being charged and turn off once topped
up.
Product Parameter
- Model: T1
- Operation Range: 10m(with no obstacle)
- Bluetooth version: V5.0
- Charging time: approx. 2hr
- Standby time: approx. 120hr
- Music time: approx. 4hr
- Battery type: li-ion
- Bluetooth profiles: HFP/HSP/A2DP/AVRCP
- Battery capacity(earphones): 3.7V 43mAh
- Battery capacity(charging case): 3.7V 380mAh
- Input parameter(charging case): 5V 500mA
(All technical data shall be subject to practical performance.)
Hazardous substances and their contents in the item
| Part Name | Hazardous Substances |
|---|---|
| (Pb) | (Hg) |
| M3in body | X |
| Battery | 0 |
| Ear tips | 0 |
| Accessories | 0 |
| Charging cable | X |
This form is made by SJ/T 11364 regulation.
0 : means that hazardous substance content in the homogeneous materials
of this part is within the limits of GB/T 26572 regulation.
X ：means that hazardous substance content in, at least, one certain
homogeneous material of this part is beyond the limits of GB/T 26572
regulation.
Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Perform standard: Q/HL 1-2016 Q/HL 2-2017
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Daojiao Town, Dongguan City, Guangdong, China
Tips
- Before using the headset, please read the manual carefully and keep it for future references.
- The headset need to be fully charged prior to first-time use.
- If the headset is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by qualified manufacturer.
- If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.
Caveats
- Never disassemble or modify your headset for any reasons to avoid any damages and danger.
- Do not store the headset in extreme temperatures (under 0℃ or over 45℃).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electricshock.
- Do not use harsh chemicals or strong detergents to clean the headset.
- Keep the headset dry.
Warranty Card
Warranty Period
12 months after you purchase this item.(or you may inquire your local shopper
for more details.)
Free Service:
Supposing any defects caused by quality issues occur within the warranty
period, please take this warranty card and purchase receipts to your
distributor for free exchange service.
Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:
Free exchange service will not be accessed under following circumstances:
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>