QCY BH22QT15A Open Truly Wireless Earbuds User Guide
- June 3, 2024
- QCY
Table of Contents
QCY BH22QT15A Open Truly Wireless Earbuds User Guide
Overview
Charging case
**USB cable
**
Above pictures are for reference only yet practical accessories may vary
How to Wear
-
Put on both earbuds properly
-
Rotate front cavity until its vertical position
-
Rotate hook along pinna to the back of ear
-
Rotate front cavity to fit yourself (Max. 90 degrees)
How to Connect
Open lid and pick up earbuds to power them on. On phone, search QCY Crossky
GTR and tap to connect. (Earbuds will auto reconnect to the last device in
connectivity records, if any)
One Press to Turn Connectable
- Earbuds have been connected to phone.
- Push earbuds into case, open case and keep pressing button on case for 3s or until LED turns solid white. Pick up earbuds again to turn them connectable to phone.
Factory Setting
Push earbuds into case and keep pressing button on case for 10s or until LED
blinks white 5 times to reset and power on earbuds.
LED on Case
(Open lid or press button on case)
LED turns on white for 5s: middle or high battery Led turns on red for 5s: low
battery LED will glow solid red when case is charging and turn white once it
is topped up.
Instructions
Power-on: keep touching the panel for 1.5s
Power-off: push earbuds back in case
Answer/end call: double touch the panel
Ignore call: keep touching the panel for 1.5s
Skip track backward: keep touching left panel for 1.5s
Skip track forward: keep touching right panel for 1.5s
Voice assistant: triple touch left panel
Playback/pause: double touch the panel
Low-latency mode: triple touch right panel
Warranty Card
Warranty Period:
12 months after you purchase this item (or you may inquire your local shopper
for more details).
Free Service:
Supposing any defects caused by quality issues occur within the warranty
period , please take this warranty card and purchase receipts to your
distributor for free exchange servIce.
Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:
Free exchange service will not be accessed under following circumstances:
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping o.
- Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
FCC Statement
This equipment has been tested and found to comply with the imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to
the
following two conditions: (1)This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: RDR-BH22QT15AR
FCC ID: RDR-BH22QT15AL
Hazardous substances and their contents in the item
Part Name | Hazardous Substances |
---|---|
Pb | Hg |
Main body | X |
Battery | O |
Ear tips | O |
Accessories | O |
Charging cable | X |
This form is made by SJ/T 11364 regulation
O : means that hazardous substance content in the homogeneous materials of
this part is within the limits of (EU) 2015/863 regulation.
X : means that hazardous substance content in, at least, one certain
homogeneous material of this part isbeyond the limits of (EU) 2015/863
regulation, but there is no mature alternative in the industry at present, it
still conforms to the EU ROHS Directive in the scope of exemption.
Notes: Please arrange using time properly as your hearing may be damaged
by using the device for a long time.
Manufacturer: Dongguan Hele Electronics Co., Ltd. Address: No. 325 Yuehui
Rd. Daojiao Town Dongguan City Guangdong Province China
Tips
- Before using the earbuds, please read the manual carefully and keep it for future references.
- The earbuds need to be fully charged prior to first-time use.
- If the earbuds are left unused for over two weeks, please recharge.
- Please use the chargers made by qualified manufacturer.
- If earbuds fail to be found by phone, please re-turn them connectable or restore factory settings. If a program error of phone occurs, please turn off and on Bluetooth function or reboot the phone.
Caveats
- Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
- Do not store the earbuds in extreme temperatures (under 0°C or over 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing risk of electricshock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
Note: please do not use earbuds for a long time as may damage your hearing
For better using experience, please scan to download QCY app before start-up.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>