QCY T11S TWS Bluetooth Earphones User Manual

TWS Bluetooth Earphones
User Manual
https://mapp.qcymall.com/qcyearphones/zh/download/qcy

For better using experience, please scan to download QCY app before start-up.

Overview

How to Connect

First-time connectivity:
Open the case and earbuds will auto power on, pair with each other, and turn connectable. On phone, search for QCY-T11S and tap to connect both earbuds to the phone.
Switch connected device:

1. Turn off the phone’s Bluetooth faculty and earbuds will it auto disconnect and turn connectable?
2. On phones, search for QCY-T11S and tap to connect.
   • Multi-point connection is not available and earbuds will auto-reconnect to the phone upon powering up again.

Factory Setting

Open the charging box cover and press the charging box button for 10 seconds until the charging box indicator shows redAfter alternating blue flashes for 3 times, close the lid to complete the reset.

How to Wear

1. Plug the ear cap diagonally downward into the ear canal gently to gently sway the head earphones without shaking.
2. During a call, point the earphone microphone towards the mouth to make the call clearer.
3. Please wear the left and right earphones correctly, and make them firmly match the auricle and the sound-producing mouth after entering the ear Must the ear canal. One

Press to Enter Pairing Mode
Put the headset in the box, open the charging box cover, and press the button of the charging box for 3 seconds until charging with the box light flashing 3 times, the headset will disconnect from the phone and enter the pairing mode.

Mono Mode

1. Earbuds were paired before. Keep touching the panel on either earbud for 2s to power on them. They will auto-turn connectable in 5s(LED will blink blue).
2. On phone, search for QCY-T11S and tap to connect the earbud to the phone.

Charge the Earbuds
Push earbuds into the case and close the lid. Earbuds will auto turn off and to be charged.
Charge the Case
LED of the case will glow solid red when charging and turn green once topped up.

Functions

lid
Power-off| The case is within the power| Push features into the case and close the lid| LED glows solid red when charging|
| / Keep touching the panel for 5s| LED glows red forts| TONE
Answer/end call| Incoming call/ calling| Double-tap the panel to answer/end the call| | TONE
Ignore call| Incoming call| Keep touching the panel for Is| | TONE
Voice assistant| Connected| Triple tap the panel| | TONE
Music pause/ resume playing| Playing| 1. Double-tap
2. Put off either earbud to pause and put it on in 15s to resume playing| | \
Skip track forward| Playing| Keep touching either panel for 2s to skip track forward| |

Warranty Card

Warranty Period 12 months after you purchase this item.(or you may inquire your local shopper for more details.) Free Service: Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.
Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address. Shop’s Name:
Shop’s Address:
Comments:
Free exchange service will not be accessed under the following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by an act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, rnaycause harmful interference to radiocommunications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/tv technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: RDR-IN20281. (left earphone)
FCC ID: RDR-IN202811 (right earphone)

Hazardous substances and their contents in the item

This form is made by SJ/T 11364 regulation.
0: means that hazardous substance content in the homogeneous materials of this part is within the limits of (EU) 2015/863 regulation.
x : means that hazardous substance content in At least, one certain homogeneous material of this part is beyond the limits of (EU) 2015/863 regulation, but there is no mature alternative in the industry at present, it still conforms to the EU ROHS Directive in the scope of the exemption.

Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Daojiao Town, Dongguan City, Guangdong, China

Tips

1. Before using the headset, please read the manual carefully and keep it for future reference.
2. The headset needs to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by a qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.

Caveats

1. Never disassemble or modify your headset for any reason to avoid any damage and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>