QCY T5 TWS Smart Wireless Earbuds User Guide
- June 5, 2024
- QCY
Table of Contents
QCY T5 TWS Smart Wireless Earbuds
Overview
How to Wear
How to Pair
Open lid and take out two earbuds , they will auto power on and pair with each other. Left earbud will auto enter pairing mode when LED on right earbud turns off. On cellphone, search for QCY_T5 and tap it to connect both earbuds to cellphone.
（Please try the following steps, in case earbuds fail to pair with each other automatically.) Turn off both earbuds then touch both earbuds for 5s to enter pairing mode. Double touch both earbuds to enter TWS mode, two earbuds will auto pair with each other when LED blinks red and green. Left earbud will auto enter pairing mode when LED on right earbud turns off. On cellphone, search for QCY_T5 and tap to connect both earbuds to cellphone.
Master Earbud Switch
For first time pairing, left earbud will serve as master earbud. If earbuds
connected with cellphone before, either earbud can serve as master
earbud(master earbud can be switched free).
TWS Mode
Power-on
Touch earbud for 2s to power on (LED turns on green for 1s) Take out earbuds
from the case to power on(LED turns on green for 1s)
Power-off
Touch earbud for 8s to power off(LED turns on red for 2s) If earbuds are not
connected with cellphone, touch either earbud for 8s to power off both earbuds.
If earbuds are connected with cellphone, touch earbud for 8s to power off that
single earbud. Push earbuds into the case to power off.
Skip Track Forward/Backward
When playing, touch right/left earbud for 2s to skip track forward/backward.
Voice Assistant When playing or standby, triple touch left earbud to wake up
voice assistant.
Gaming Mode:
When playing or gaming, triple touch right earbud to enter gaming mode(low lag
mode). Gaming mode on: two beeps; Gaming mode off: three beeps.
Removing Connectivity Records Power off earbuds then touch earbud for 10s to
remove connectivity records in earphones.
Stereo Mode
Playback/Pause
When playing, double touch either earbud to pause music and double touch again
to resume playing.
Mono Mode
- Power off earbud then touch earbud for 5s to enter pairing mode ( LED blinks red and green )
- On cellphone, search for QCY_T5
- Connected
Power-on
Touch earbud for 1s ( LED turns on green for 1s ) When charging, open lid and
take out earbud ( LED turns on green for 1s)
Power-off
Push earbud into charging case to power off ( LED glows solid red ) Touch
earbud for 8s to power off(if earbud is not connected with cellphone, touching
either earbud for 8s will power off both earbuds)
Answer Call
Double touch earbud to answer incoming call and double touch again to end it.
Ignore Call
Touch earbud for 2s to ignore incoming call
Charging Earbud
Push earbud into the case to charge. LED will glow solid red when charging and turn to green for 1 minute once top up.
Charging the Case
Charge the case via USB cable. LED will glow solid green when charging and turn off once top up.
Features
- Bluetooth 5.0 chipset delivers stable signal with low lag
- Crystal-clear stereo talking with noise isolation
- Easy-to-use control
Product Parameters
- Model:In1933
- Stand time: approx. 70hr
- Music time: approx. 4 or 5hr
- Operation range: 10m(with no obstacle)
- Battery type: li-ion
- Battery capacity(earbud):3.7V 40mAh
- Battery capacity(charging case):3.7V 380mAh
- Input parameter(charging case):5V 500mA
- Bluetooth profiles: HSP/HFP/A2DP/AVRCP
- Bluetooth version: V5.0
- Charging time: approx. 2hr
- Talking time: approx. 4hr
Hazardous substances and their contents in the item
Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time. Perform standard: Q/HL 1-2019 ; Q/HL 2-2017 Manufacturer: Dongguan Hele Electronics Co., Ltd. Address: Daojiao Town, Dongguan City, Guangdong, China
Tips
- Before using the headset, please read the manual carefully and keep it for future references.
- The headset need to be fully charged prior to first-time use.
- If the headset is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by qualified manufacturer.
- If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.
Caveats
- Never disassemble or modify your headset for any reasons to avoid any damages and danger.
- Do not store the headset in extreme temperatures (under 0℃ or over 45℃).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electricshock.
- Do not use harsh chemicals or strong detergents to clean the headset.
- Keep the headset dry.
Warranty Card
Warranty Period
12 months after you purchase this item.(or you may inquire your local shopper
for more details.) Free Service: Supposing any defects caused by quality
issues occur within the warranty period, please take this warranty card and
purchase receipts to your distributor for free exchange service.
Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
UShseorp’s’sANdadmrees:s:
Shop’s Address:
Comments:
Free exchange service will not be accessed under following circumstances：
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God.Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC ID: 2ATIH-EP-T21
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>