QCY AT-X80R TWS Smart Earbuds User Manual
- June 5, 2024
- QCY
Table of Contents
AT-X80R TWS Smart Earbuds
User Manual
Overview
How to Wear
How to Pair
Open the lid and take out two earbuds, they will auto-power on and pair with
each other. The left earbud will auto-enter pairing mode when the LED on the
right earbud turns off. On the cellphone, search for QCY_T5 and tap it to
connect both earbuds to the cellphone.
(Please try the following steps, in case earbuds fail to pair with each other
automatically.)
Turn off both earbuds then touch both earbuds for 5s to enter pairing mode.
Double touch both earbuds to enter TWS mode, two earbuds will auto pair with
each other when LED blinks red and green. The left earbud will auto-enter
pairing mode when the LED on the right earbud turns off. On the cellphone,
search for QCY_T5 and tap to connect both earbuds to the cellphone.
Master Earbud Switch
For first time pairing, the left earbud will serve as the master earbud.
If earbuds are connected with cellphones before, either earbud can serve as a
master earbud (the master earbud can be switched free).
TWS Mode
Power-on
Touch earbud for 2s to power on (LED turns on green for 1s)
Take out earbuds from the case to power on(LED turns on green for 1s)
Power-off
Touch earbud for 8s to power off(LED turns on red for 2s)
If earbuds are not connected to a cellphone, touch either earbud for 8s to
power off both earbuds.
If earbuds are connected to a cellphone, touch earbuds for 8s to power off that
single earbud.
Push earbuds into the case to power off.
Skip Track Forward/Backward
When playing, touch right/left earbud for 2s to skip track forward/backward.
Voice Assistant
When playing or on standby, triple touch the left earbud to wake up the voice
assistant.
Gaming Mode:
When playing or gaming, triple touch the right earbud to enter gaming mode(low
lag mode).
Gaming mode on two beeps; Gaming mode off: three beeps.
Removing Connectivity Records
Power off earbuds then touch earbuds for 10s to remove connectivity records in
earphones.
Stereo Mode
Playback/Pause
When playing, double touch either earbud to pause music and double touch again
to resume playing.
Mono Mode
- Power off earbud then touch earbud for 5s to enter pairing mode ( LED blinks red and green )
- On a cellphone, search for QCY_T5
- Connected
Power-on
Touch earbud for 1s ( LED turns on green for 1s )
When charging, open lid and take out earbud ( LED turns on green for 1s)
Power-off
Push earbud into charging case to power off ( LED glows solid red )
Touch the earbud for 8s to power off (if the earbud is not connected with a
cellphone, touching either earbud for 8s will power off both earbuds)
Answer Call
Double touch the earbud to answer the incoming calls and double touch again to end it.
Ignore Call
Touch earbud for 2s to ignore an incoming call
Charging Earbud
Push the earbud into the case to charge. LED will glow solid red when charging and turn to green for 1 minute once topped up.
Charging the Case
Charge the case via USB cable. LED will glow solid green when charging and turn off once top up.
Features
| Bluetooth 5.0 chipset delivers a stable signal with low lag
---|---
| Crystal-clear stereo talking with noise isolation
| Easy-to-use control
Product Parameters
Model: In1933
Bluetooth version: V5.0
Stand time: approx. 70hr Charging time: approx. 2hr
Music time: approx. 4 or 5hr Talking time: approx. 4hr
Operation range: 10m(with no obstacle)
Battery Type: Li-ion
Battery capacity(earbud):3.7V 40mAh
Battery capacity(charging case):3.7V 380mAh
Input parameter(charging case):5V 500mA
Bluetooth profiles: HSP/HFP/A2DP/AVRCP
Hazardous substances and their contents in the item
| Part | Hazardous Substances |
|---|---|
| Pb | Ni) CName |
| DEHP | DBP |
| Main body | X |
| Battery | O |
| Ear tips | O |
| Accessories | O |
| Charging cable | X |
This form is made by SJ/T 11364 regulation.
O: means that hazardous substance content in the homogeneous materials of this
part is within the limits of (EU) 2015/863 regulation .
X: means that hazardous substance content in, at least, one certain
homogeneous material of this part is beyond the limits of (EU) 2015/863
regulation, but there is no mature alternative in the industry at present, it
still conforms to the EU ROHS Directive in the scope of the exemption.
Perform standard: Q/HL 1-2019 ; Q/HL 2-2017
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Daojiao Town, Dongguan City, Guangdong, China
Notes: Please arrange using time properly as your hearing may be damaged
by using the device for a long time.
Tips
- Before using the headset, please read the manual carefully and keep it for future reference.
- The headset needs to be fully charged prior to first-time use.
- If the headset is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by a quality manufacturer.
- If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re- enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.
Caveats
- Never disassemble or modify your headset for any reason to avoid any damage and danger.
- Do not store the headset in extreme temperatures (under 0℃ or over 45℃).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the headset.
- Keep the headset dry.
Warranty Card
Warranty Period
12 months after you purchase this item.(or you may inquire your local shopper
for more details.)
Free Service:
Supposing any defects caused by quality issues occur within the warranty
period, please take this warranty card and purchase receipts to your
distributor for free exchange service.
Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:
Free exchange service will not be accessed under the following circumstances：
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by an act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC ID: 2AW6X-AT-X80R
CMIIT ID: XXXXXXXXXX
Documents / Resources
| QCY
AT-X80R TWS Smart
Earbuds
[pdf] User Manual
AT-X80R, ATX80R, 2AW6X-AT-X80R, 2AW6XATX80R, TWS Smart Earbuds, Earbuds
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>