Watchguard WGRXBT2 2-Channel Bluetooth Wireless Remote Control User Manual

Watchguard WGRXBT2 2-Channel Bluetooth Wireless Remote Control User Manual

Product Overview

Watchguard WGRXBT1 and WGRXBT2 are smart controllers that are based on Bluetooth. They can be used with numerous types of remote control devices and access control systems..

Features

• Controlled by Bluetooth (within 10 metres) or wireless remote control
  (within 100 metres)

• Set up and control by App

• Support 60 wireless remote controls and 1000 Bluetooth users

• Device output naming

• Wigend output for access control system (WGRXBT1 only)

• Relay output – Output time by App is adjustable (Remote unlock time is
  fix)

• Log records

• Device sharing

• User management: Add, delete users

• Restore factory defaults

DOWNLOAD THE WGRXBT APP

1. On your smart-phone device, search for HX-B01 for WGRXBT1 or HX-B02 for WGRXBT2, on the App Store or Google Play Store.
2. Install the app.
   
   

Connect the WGRXBT1/2

Connect the unit with 12V-24 AC/DC power. The Bluetooth LED will flash.

Terminals

AC

12-24V

| Connect to a 12-24V AC or DC power supply

(power supply not included)

---|---
AUX –| 0V (GND)
AUX +| This is the DC output from the AC power supply terminal. It can be used to drive other

accessories. (DC 200mA max.)

RELAY|
C| Common contact of the relay
NO| Normally Opened contact of the relay
NC| Normally Closed contact of the relay
WIEGAND| WGRXBT1 ONLY
D1

(DATA1)

| Connect to D1 terminal of a Wiegand

compatible access controller

D0

(DATA0)

| Connect to D0 terminal of a Wiegand

compatible access controller

GND| Connect to ground terminal(0V) of the

access controller

Remote learning and Bluetooth pairing

The device supports 60 wireless remote controls. You must add/ learn the remote control before using it. You should also pair the Bluetooth controller with your smartphone. So that you can use your smart-phone to control the controller.

To add a remote control:

• a) Press an hold the Remote Learning Button for about 1 second. The Learning LED will light up.
• b) Press Button A on the remote control. The LED will flash for about 1 second and then turn off if learning is successful.

Button A

WGRXBT1 – Relay + Wiegand output depends on App setting.()

WGRXBT2 – Relay output 1

Button B

WGRXBT1 – Hold output. The relay is ON as long as you press and hold the button.

WGRXBT2 – Relay output 2

Button C – Emergency cut off. Press this

button to force turning off the relay.

App Set Up & Control

1. Install the APP. Note: The app for WGRXBT1 and WGRXBT2 are not compatible.
2. Press and hold the Bluetooth Pairing Button for about 5 seconds. The Bluetooth LED will stay ON.
3. Enter the APP. Click the icon to add controller.
4. Select Admin and enter the controller name (Gate Name) and tap the   icon.
5. A list of available Bluetooth controller will be shown. Tap the one you want to add.
6. The MAC address of the controller will be display. Tap DONE

GATE SETTINGS

GATE SETTINGS MENU

• Name – Rename the controller

• Auto-open when I arrive – Automatically unlock the gate when you are VERY CLOSE to the controller.

• Manage who can access this gate – share this controller with another user.

• Recent access data – Gate opening log records.

• Wiegand output (WGRXBT1) – Set up the ID number for the controller to work with access controller

• Relay working time (WGRXBT1) – Set the relay ON time when button A is pressed.

• Relay mode (WGRXBT2) –

  • Self Lock Mode: Toggle the output relay when the APP button or remote control button is pressed.
  • Non Lock Mode: Timed output. The output will be switched off automatically after the preset time expires. The delay time is only effective when the APP button is pressed. Remote control time is fix.
  • Inter Lock Mode: Tap to turn ON one of the two outputs. It will turn OFF automatically after the preset period of time.
    Note: Only one output can be ON at the same time. If Output 1 is ON and Output 2 is tapped ON, Output 1 will turn OFF immediately and vice versa.

• Restore Factory Setting – Delete all controllers, users and log data stored.

Note: Remote control will be not deleted.
To delete all remote controls, press and hold the Remote Learning Button for about 8 seconds. The LED will flash when all remote controls are deleted.

Auto-open when I arrive(WGRXBT1 ONLY)

The feature will unlock the gate for the user without them having to press the remote control or mobile APP. When the user is VERY CLOSE to the controller, the controller detects the Bluetooth signal from the registered mobile and will unlock the gate automatically.

The screen shows the position of the device (green circle) and the user(red circle).

To activate this function: Check Enable box and tap the Learn button.

CONTROLLER SHARING

You can share the controller with other users so they can unlock the gate without having to pair the controller in advance

On the Administrator mobile phone:

• a) Select “Manage who can access this gate” in the GATE SETTINGS menu then tap the + icon on the top right corner.
• b) Enter the user name and tap “Add User” button.
• c) When the user is added, a QR code and a Register ID are generated. You can send this ID to the user by email, SMS, Whatsapp, Wechat or other messenger Apps by tapping the “Send” button.
• d) If you want to limit the number of time for the user, press BACK and select the user.
• e) Enter the number of times allowed in the “Limit times” box.
  

On the user mobile phone:

• a) Enter the APP. Click the icon to add controller
• b) Select User and tap the QR icon to scan the QR code that the administrator sent you. (App must have camera permission)
• c) If you don’t have the QR code, you can also enter the Register ID in the Register ID box .
• d) Tap DONE when finish.
  

Wiegand output (WGRXBT1 ONLY):

• a) Enter 3 digit HID and 5 digit PID
• b) Add this number to your access controller system. This will generate a Wiegand-26 code when the remote control Button A or App unlock button is pressed.

Note: For some access controllers, you may need to convert this number to hexadecimal number.

For example, if you are using VIP professional access controller system, the correct card number is: <<00> + <> + <>

Note: To convert decimal to hex, Open Google /search engine and then type the decimal number to be converted and “in hex”statement into the Google search box.

In this example:

Type: “123 in hex”you will get 0x7B.
Type: “45678 in hex”you will get 0xB26E.
Ignore all“0x”, the card number is: 007BB26E

Note: Since VIP access controller supports Wiegand-34, the card number must be 8 digits, so we must add two leading zeros. If Wiegand-26 is used, card number is 6 digits so no leading zeros are necessary.

Important: You must also add appropriate access rights for this card number on the access controller.

DEVICE OPERATION

There are 3 ways you can unlock the gate:

1. Press the button on the mobile APP.
2. Press Button A on the remote control.
3. Enable the Auto-open feature mentioned above.(WGRXBT1 ONLY)

PRODUCT SPECIFICATIONS

Output

Channel

| 1/2| RF frequency| 433MHz
Supply

voltage

| 12~24V AC/DC| Working temperature| -10 to +50 oC
Relay contact rating| 20A 14 VDC

or 20A 125 VAC

| Size| 937030mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>