WatchGuard BL8AE8 Firebox T85-PoE User Guide

: October 30, 2023
: Watchguard

Table of Contents

WatchGuard BL8AE8 Firebox T85-PoE
Product Information
Product Usage Instructions
IMPORTANT NOTES
DECLARATION OF CONFORMITY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WatchGuard BL8AE8 Firebox T85-PoE

WatchGuard-BL8AE8-Firebox-T85-PoE-product

Product Information

The product is a WatchGuard Firebox T85-PoE with a hardware model BL8AE8. It is compliant with the Electromagnetic Compatibility (EMC) directive and Low Voltage Directive (LVD) of the European Union (EU), as well as the RoHS directive 2002/95/EC and similar regulations that may be adopted by other countries for European Sales. The product conforms to the following EU directives and standards: Low Voltage (2014/35/EC), Electromagnetic Compatibility (2014/30/EU), RoHS EU 2015/863(RoHS2), WEEE Directive 2012/19/EU, and REACH EC 1907/2006. It meets safety, emission, and immunity standards such as EN 62368-1:2014+A11:2017, EN 55032 :2015/A11:2020, FCC Part 15B, ICES-003 Issue 7, CISPR 32:2015+AMD1:2019, VCCI-CISPR 32:2016, and AS/NZS CISPR 32:2015/AMD1:2020.

Product Usage Instructions

Activate your Firebox by going to www.watchguard.com/activate.
Log in to your WatchGuard account or create a new account. If you create a new account, return to www.watchguard.com/activate after completing the account creation process.
Connect your Firebox and power it on. Make sure your computer is configured to use DHCP. When you connect to the Firebox, it will assign an IP address on the 10.0.1.0/24 network.
To connect to the Web UI, go to https://10.0.1.1:8080. You can safely ignore certificate warnings because the Firebox uses a self-signed certificate.
Log in with the user name admin and the passphrase readwrite.
Follow the directions in the Web Setup Wizard to configure your Firebox.
Install the Firebox in your network.

For more information, visit watchguard.com/start.

Activate Your Firebox

Go to www.watchguard.com/activate
Log in to your WatchGuard account, or create a new account. If you create a new account, return to www.watchguard.com/activate after you finish the account creation process.

Connect Your Firebox and Power It On

Make sure your computer is configured to use DHCP. When you connect to the Firebox, it will assign an IP address on the 10.0.1.0/24 network. WatchGuard-BL8AE8-Firebox-T85-PoE-fig-1

Connect to the Web UI

Go to https://10.0.1.1:8080 You can safely ignore certificate warnings, because the Firebox uses a self-signed certificate.
Log in with the user name admin and the passphrase readwrite.
Follow the directions in the Web Setup Wizard to configure your Firebox.
Install the Firebox in your network.

For more information, go to watchguard.com/start

IMPORTANT NOTES

CE Notice
The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).
RoHS Statemen
The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous Substances (“RoHS directive”‘) that became valid on July 1, 2006. It states that all new electrical and electronic equipment put on the market within the member states must not contain certain hazardous materials. This device complies with the European Union’s R0HS directive 2002/95/EC and similar regulations that may be adopted by other countries for European Sales. To see additional certification information and languages, go to watchguard.com/start

DECLARATION OF CONFORMITY

WatchGuard Technologies, Inc. 505 Fifth Ave. S., Suite 500 Seattle, WA 98104-3892 USA WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and standards identified in this declaration.

Product(s)
WatchGuard Product Name : Firebox T85-PoE
Hardware Model : BL8AE8
EU Directive(s): Low Voltage (2014/35/EC) Electromagnetic Compatibility (2014/30/EU) RoHS EU 2015/863(RoHS2 WEEE Directive 2012/19/EU REACH EC 1907/2006,

Standard(s)
Safety: EN 62368-1:2014+A11:2017
Emission: EN 55032 :2015/A11 :2020 FCC Part 15B ICES-003 Issue 7 CISPR 32:2015+AMD1:2019 VCCI-CISPR 32:2016 AS/NZS CISPR 32:2015/AMD1:2020
Immunity: EN 61000-3-2:2014 EN 61000-3-3:2013+A1:2019 EN 55035:2017/A11:2020 IEC 61000-4-2 Edition 2.0 2008-12 IEC 61000-4-3 Edition 3.2 2010-04 IEC 61000-4-4 Edition 3.0 2012-04 IEC 61000-4-5 Edition 3.1 2017-08 IEC 61000-4-6 Edition 4.0 2013-10 IEC 61000-4-8 Edition 2.0 2009-09 IEC 61000-4-11 Edition 3.0 2020-01
Signature:
Full Name: Laurence Huang
Position: Hardware Program Manager
Date: 2 December 2022

WATCHGUARD TECHNICAL SUPPORT

1.877.232.3531 (U.S. and Canada) +1.206.613.0456 (all other countries) www.watchguard.com/support

ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104 U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895 WEB: www.watchguard.com ©2022 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners. P.N. 352-T085-001 120622 Rev B