Watchguard ALL-SIR2 AC-Powered Wireless Indoor Siren User Manual

Watchguard ALL-SIR2 AC-Powered Wireless Indoor Siren User Manual

Description

This indoor siren designed with unique, concise and stylish appearance, which is suitable for different decoration style of home and office. It can used as an indoor siren or work as a stand alone alarm system. With low-consumption, stable function, strong anti-interference ability, it can effectively protect your life and property safety. Once any detector has been triggered, the control panel will receive the signal and be alarming immediately, the alarm indicator will deter the intruders as well. The siren adopt wireless transmission technology, it is portable device and easy to install. This siren is widely used at home, villa, office, warehouse, shops…

Features

Compact and fashionable design
Wireless transmission technology, easy to install
Different color LED indicator shows arm/disarm status
Siren and strobe, more safety
Built-in 600mAh/3.7V back-up battery can last 12 hours
Keep connected with extented range up to 100M
Changeable plug, meet different customer needs

Specifications

• Voltage: AC110-240V 50/60Hz
• Max Current: 20mA/220V
• Power Rating: ≤5W(220V)
• Maximum standby time: ≥ 20h
• Back-up Battery: 600mAh/3.7V
• Wireless Receiving Distance: 100M(Open Area)
• Siren Volume: 90dB
• Working Temperature: -25℃ -55℃
• Operating Humidity: ≤95%(Non-condensing)
• Housing Material: ABS
• Siren Measurement:
• Plug Type: EU/UK/US/AU

General View/LED Indication

1. Siren

2. LED Indication

3. Red LED Flashes On: Enrolling

4. Green LED On: System disarmed

5. Blue LED On: System armed in away mode.

6. Blue LED Flashes: System armed in stay mode

7. Enroll Button
   

8. Plug Handle ( Press the handle, counter clockwise rotate to change the plug)

9. Interchangeable Plugs
   

Button Operation

Function

| Operation|

Status

---|---|---

Turn On Siren

| Press Enroll Button for 3 seconds|

The siren beeps once, the LED indicator light up in green color.

Turn Off Siren

| Press Enroll Button for 10 times|

The siren beeps once, the LED indicator blacks out.

Turn On/Off LED Indicator

| Press Enroll Button for 5 times|

The siren beeps once, the LED indicator blacks out or light up.

Turn On/Off Beeps Sound

| Press Enroll Button for 3 times|

The siren beeps once.

Enters into Enroll State

| Press Enroll Button once|

The siren beeps once, LED indicator light up in red.

Delete Enrolled Wireless Accessories

| Press Enroll Button for 5 seconds|

The siren beeps once.

Wireless Siren Network Mode

In network mode, the siren is a control panel based system which should be connected to the control panel. Once the enrollment is successful, when alarm panel is alarming, the wireless siren will hoot loudly and the red LED will be flashing continuously.

Connect Siren to the Alarm Panel

1. Press the enroll button, system beeps once and LED indicator light up in red.( System will exit automatically after 30 seconds or press the enroll button again to exit ).
   

2. Trigger the control panel tamper switch, the enrollment is successful. the siren beeps once, the red LED indicator flashes once, enrolled successfully.
   The siren beeps twice, the red LED indicator flashes once, the sensor has been enrolled before.
   The siren beeps three times, the red LED indicator flashes once, the storage is full.

Note: Please do not trigger any other accessories during connecting with the control panel.

Standalone Alarm System Mode

As a standalone alarm system, all accessories should be enrolled to the siren. Any detector triggered will activate the siren immediately.

Connect Expandable Accessories to the Siren

1.  Press the enroll button, system beeps once and LED indicator light up in red.( System will exit automatically after 30 seconds or press the enroll button again to exit )
   

2. Trigger the sensors (for example, press the arm button of the remote control, depart the transmitter and magnet of door sensor etc.)

• The siren beeps once, the red LED indicator flashes once, the enrollment is successful.
  

• The siren beeps twice, the red LED indicator flashes once, the sensor has been enrolled before.
  

• The siren beeps three times, the red LED indicator flashes once, the storage is full.
  

Clear All Enrolled Accessories

Press and hold the enroll button for 5 seconds until one beep is heard, all accessories will be cleared.

Work with Door Bell

The siren can work with the door bell, press the enroll button of the siren, then press the smart button to enroll, When a visitor presses a button, the bell rings in “Dingdong” sound to alert home owner.

Installation

1. Fix the the adapter on detector properly by rotating.
2. Power on

Notice:

1. The back-up is battery only for emergency use, AC power should be the main supply.
2. Do not hit or drop the indoor siren in case of damage component inside.
3. The strobe siren should be tested regularly, so that all fault can be fixed in time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>