kogan KAMTARICOKA 14-In-1 Air Fryer and Multicooker User Guide
- June 6, 2024
- Kogan
Table of Contents
QUICKSTART GUIDE
14-IN-1 AIR FRYER & MULTIC-OOKER
KAMTARICOKA
OVERVIEW
Multi-cooker Function
a. Multi cooker function controls
b. Multi cooker indicator
c. Individual function indicators
d. Display
e. Temperature indicator
f. Time indicator
Steps for Usage
- Connect power.
- Press a function button to select it.
- Toggle between temperature and time.
- Adjust either temperature or time as selected.
- Press to put the multi-function cooker in Keep Warm mode.
- Press to set a delay before cooking starts (e.g. for Rice\Steam\Stew\Slow cook).
- Press to begin operation. Press during operation to pause/resume. Long press (3 seconds) to quit the program and return to standby mode.
When in standby mode, long-press the temperature/time button (5 seconds) to switch between Celsius and Fahrenheit.
Air Fryer Function
a. Air fryer function controls
b. Air fryer indicator
c. Individual function indicators
d. Display
e. Temperature indicator
f. Time indicator
Steps for Usage
- Connect power and place the cover on top
- Press a function button to select it.
- Toggle between temperature and time.
- Adjust either temperature or time as selected.
- Press to begin operation. Press during operation to pause/resume – here you can remove the lid to check or turn food before replacing the lid and resuming.
Long press (3 seconds) to quit the program and return to standby mode.
When in standby mode, long-press the temperature/time button (5 seconds) to switch between Celsius and Fahrenheit.
Air Fryer Assembly
Before using air fryer functions, fit the air cover on the pot inside the
body and use the latch to close the appliance firmly as per the images below.
OPERATION
Multi-cook Function
In this cooking mode, only the bottom heating plate H2 (220-240V 1250W) is heated and the bottom NTC T2 is sensitive to the temperature of the bottom outside of the inner pot. The glass cover can be used for the multicooker function. For the Sear/Saute function, the glass cover is not required.
Function| Default| Temp. Range| Time Range| Keep Warm|
Delay Start
---|---|---|---|---|---
Rice| — —:— —| N/A| N/A| Default 2h| V
Steam| 0:15| N/A| 0:01-2:00| Default 2h| Y
Stew| 2:00| N/A| 0:15-4:00| 10h| Y
Yogurt| Step 1: Heat Step 2: 8:00| N/A| Step 1: N/A
Step 2: 3:00-24:00| N/A| N
Sear/Saute| 200°C, 0:30| 120-220°C| 0:05-1:00| N/A| N
Slow Cook| 4:00| N/A| 0:30-24:00| Default 10h| Y
Keep Warm| 10:00| N/A| 1:00-10:00| –| Y
Delay Start| 1:00| N/A| 1:00-24:00| –| –
Rice:
- Select the Rice function and the screen will display “——：——”.
- Press the Start/Stop button and the machine will beep and run the program. The display will show a countdown in the last 10 minutes of the program.
- When the program is finished, the machine will beep and enter Keep Warm for 2 hours before beeping again and entering standby.
Steam:
-
Select the Steam function and the screen will display the default time: adjust as required.
-
Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
-
When the program is finished, the machine will beep and enter Keep Warm for 2 hours before beeping again and entering standby.
Stew:
-
Select the Stew function and the screen will display the default time: adjust the time as required.
-
Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
-
When the program is finished, the machine will beep and enter Keep Warm for 10 hours before beeping again and entering standby.
Yogurt:
-
Select the Yogurt function and the screen will display “HEAT”.
-
Press the Start/Stop button and the machine will begin sterilization, heating to 82°C.
-
When the temperature reaches 82°C, the screen will flash “HEAT” while beeping. At this time, the milk temperature is very high and the milk should be cooled before
yogurt, probiotics, or lactic acid bacteria are added. -
Press the Start/Stop button and the screen will display the default time of 8:00, counting down as it enters the yogurt fermentation state.
-
When the program is finished, the machine will beep and enter standby.
To run the program for extra time, you can press the Yogurt twice and adjust the default time as required.
Sear/Saute:
- Select the Yogurt function and the screen will display the default temperature and start flashing: adjust as required.
- Press Temp/Time to switch to Time: adjust as required.
- Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
- When the program is finished, the machine will beep and enter standby.
Slow cook:
1. Select the Slow Cook function and the screen will display the default time
and start flashing: adjust as required.
2. Press the Start/Stop button and the machine will beep and begin to
preheat. Once preheating is complete, it will beep again and show the time
remaining.
3. When the program is finished, the machine will beep and enter Keep Warm
for 10 hours before beeping again and entering standby.
Keep Warm:
1. Select the Slow Cook function and the screen will display the default time
and start flashing: adjust as required.
2. Press the Start/Stop button and the machine will beep and begin to
preheat. Once preheating is complete, it will beep again and show the time
remaining.
3. When the program is finished, the machine will beep and enter standby.
Delay Start:
1. After setting the temperature and time of the selected function, press
Delay Start and the screen will display a default pre-set time and start
flashing. (The function
indicator and “Delay Start” indicator will remain on).
2. Adjust the time as required and press Start/Stop: the machine will beep
and count down to the set time. When the set time is reached, the machine will
continue with the programmed function.
Air Fryer Function
During this cooking mode, the heating pipe H1 (220-240V 1300W) at the top and
the heating plate H2 (220-240V 1250W) at the bottom is heated alternately. The
motor at the top (220-240V 30W) works according to the requirements of each
function. The top NTC T1 is responsible for sensing the air temperature at the
top and the bottom NTC T2 is responsible for sensing the temperature at the
bottom of the inner pot and the outside.
Function
|
Default
|
Temp. Ran, .
|
Time Range
---|---|---|---
Broil| 00:10| –| 0:10-1:00
Fries| 200°C 00:20| 150-200°C| 0:01-0:30
Bake| 170°C 01:00| 120-220°C| 0:10-4:00
Beef| 200°C 00:20| 120-220°C| 0:05-1:00
Roast| 200°C 00:45| 120-220°C| 0:10-3:00
Dehydrate| 65°C 02:00| 40-90°C| 0:15-24:”
Broil:
- Select the Broil function and the screen will display the default time: adjust as required.
- Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
- When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.
Fries:
- Select the Fries function and the screen will display the default temperature and start flashing: adjust as required.
- Press Temp/Time to switch to Time: adjust as required.
- Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.4. When the 4.
- program is finished, the machine will display “DONE” for 2 minutes before entering standby.
Bake:
- Select the Bake function and the screen will display the default temperature and start flashing: adjust as required.
- Press Temp/Time to switch to Time: adjust as required.
- Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
- When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.
Beef:
1. Select the Beef function and the screen will display the default temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
4. When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.
Roast:
1. Select the Roast function and the screen will display the default
temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to
preheat. Once preheating is complete, it will beep again and show the time
remaining.
4. When the program is finished, the machine will display “DONE” for 2
minutes before entering standby.
Dehydrate:
1. Select the Dehydrate function and the screen will display the default
temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to
preheat. Once preheating is complete, it will beep again and show the time
remaining.
4. When the program is finished, the machine will display “DONE” for 2
minutes before entering standby.
Need more information?
This is a Quick Start Guide , and we hope that this
has given you the assistance needed for a simple setup.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Documents / Resources
|
kogan KAMTARICOKA 14-In-1 Air Fryer and
Multicooker
[pdf] User Guide
KAMTARICOKA, 14-In-1 Air Fryer and Multicooker
---|---