hp Generic External Power Supply Instructions
- June 12, 2024
- HP
Table of Contents
hp Generic External Power Supply
Product Information
- Product Category: External Options
- Marketing Name / Model: HP Generic External Power Supply
- Purpose: The document provides instructions for the disassembly of HP Inc. products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
| Item Description | Notes | Quantity of items included in product |
|---|
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA) with a surface greater than 10 sq cm
| Main board PCB| 1
Batteries, excluding Li-Ion batteries.| | 0
Li-Ion batteries. Include all Li-Ion batteries if more than one
is provided with the product (such as a detachable notebook
keyboard battery, RTC coin cell, etc.)| | 0
Mercury-containing components| | 0
Liquid Crystal Displays (LCD) with a surface greater than 100
sq cm| | 0
Cathode Ray Tubes (CRT)| | 0
Capacitors / condensers (Containing PCB/PCT)| | 0
Electrolytic Capacitors / Condensers measuring greater than 2.5
cm in diameter or height| | 0
External electrical cables and cords| | 0
Gas Discharge Lamps| | 0
Plastics containing Brominated Flame Retardants (not including
external cables and cords, PCBs or PCAs already listed as a
separate item above)| | 0
Components and parts containing toner and ink, including
liquids, semi-liquids (gel/paste) and toner| | 0
Components and waste containing asbestos| | 0
Components, parts and materials containing refractory ceramic
fibers| | 0
Components, parts and materials containing radioactive
substances| | 0
Components containing chlorofluorocarbons (CFC),
hydrochlorofluorocarbons (HCFC) or hydrofluorocarbons (HFC),
hydrocarbons (HC)| | 0
EL-MF877-00
Template Revision C1
Last revalidation date 03-March-2022
Tools Required
| Tool Description | Tool Size (if applicable) |
|---|---|
| Saw | |
| Philips screw driver | |
| Flat blade screw driver |
Product Disassembly Process
List the basic steps that should typically be followed to remove components and materials requiring selective treatment including the required steps to remove the external enclosure: Open the external enclosure
- Open the external enclosure
- Remove the PCBA module
The graphic illustration below identifies the items contained in the product that require selective treatment:
STEP 1 Remove the PCB of the External power supply (actual sample may vary)
Note: The image is for illustrative purposes only and the actual product may vary.
Product End-of-Life Disassembly Instructions
Product Category: External Options
Marketing Name / Model
[List multiple models if applicable.]
HP Generic External Power Supply
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the plastic part. For any questions on plastic marking or identification of location of parts or components requiring selective treatment, please contact HP’s Sustainability Contact.
HP Inc. instructions for this template are available at EL- MF877-01