ZOSI YCC365 Plus HD Smart WiFi Camera User Guide
- June 6, 2024
- ZOSI
Table of Contents
ZOSI YCC365 Plus HD Smart WiFi Camera
Download the App into Your Mobile Device
Option 1: Search and download YCC365 Plus from App Store or Google Play;
Option 2: Scan the QR code below to download.
Account Registration and Login
Please register an account with a valid email address at your first use of this App, then log in.
Note: Log in on mobile phone is only applicable to Vietnam.
Connecting the Camera to Your Mobile Device
IMPORTANT:
- For all connecting options, you will hear “Please configure camera by scanning code or AP hotspot” after the camera is powered on. Use the pin to press and hold the Reset button for5-6s to reset the camera if no voice You will hear “Reset Success” at a successful reset;
- This camera only supports 4GHz Wi-Fi;
- For stable network connection, please make sure the camera and the mobile device are close to the router.
- Connecting by Scanning the QR Code
Step 1: Connect the mobile device to your Wi-Fi, then log in to YCC365 Plus.
Click + in the upper right corner, select Intelligent camera and Device adding by scanning the code;
** Step 2:
Tick If you have finished the above steps, click
Connect to the Network, then click Connect to the
network. Select the Wi-Fi your mobile device is connected, enter the
correct password and click Next** to continue;
Tip: Click Network Testing in the upper right corner of Connect to Wi-Fi
interface to check the status of your Wi-Fi connection.
Step 3: Align the QR code on your mobile device with the camera lens and keep assistance of 4-8 inches;
Step 4: Click I heard the “beep” voice to connect to the Internet after 2 beeps from the camera. During the process, you will hear “Please wait for Wi- Fi connecting” and” Please wait for Internet connecting”. When you hear “Internet connected, welcome to use cloud camera”, the camera is connected successfully.
Connecting by AP Hotspot
Step 1: Connect the mobile device to your Wi-Fi, then log in to YCC365
Plus. Click + in the upper right corner, select Intelligent camera
and Addition of AP hotspot;
Step 2: Tick If you have finished the above steps, click Next, then click Next
to enter the Network configuration interface;
Step 3: Click Go to Setting to enter the network setting interface of the
mobile device, then connect to the CLOUDCAM_XXXX Wi-Fi;
Step 4: Tap <I to get back to YCC365 Plus to
enter Network configuration interface, then click Next to continue;
Tip: There willbe a pop-up window if the CLOUDCAM_XXXX Wi-Fi connection is failed.
Step 5: Select the Wi-Fi your mobile device is connected, enter the correct password, then click Next. The camera will connect to the Internet after 2 beeps from the camera. During the process, you will hear “Please wait for Wi- Fi connecting” and “Please wait for Internet connecting”. When you hear “Internet connected, welcome to use cloud camera”, the camera is connected to Wi-Fi successfully.
www.zositech.com
service@zositech.com
All rights reserved. No part of this publication may be reproduced by any
means without written permission from ZOSI. The information in this
publication is believed to be accurate in all respects.
ZOSI cannot assume responsibility for any consequences resulting from the use
thereof. The information contained herein is subject to change without notice.
Revisions or new editions to this publication may be issued to incorporate
such changes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>