ZOSI 306Pro Wire Free Battery Security Camera System User Guide
- May 15, 2024
- ZOSI
Table of Contents
ZOSI 306Pro Wire Free Battery Security Camera System
Product Information
This document provides a quick start guide for the ZOSI 306 Pro Wire-Free Battery Security Camera System. For more detailed information and support, visit Zosi Technology.
Package Contents
- Network Video Recorder (NVR) *1
- Camera 4 or Camera 8 (depending on package)
- Quick Start Guide *1
- Mouse *1
- Mounting base 4 or 8
- Screw package 4 or 8
- Screwdriver *1
- 1-meter Network cable *1
- 12V-2A NVR Power Supply *1
- Battery *1
Specifications:
- Model: 306 Pro Wire-Free Battery Security Camera System
- Components: NVR, Cameras, Quick Start Guide, Mouse, Mounting Brackets, Screws, Screwdriver, Network Cable, Power Adapter, Battery
- Features: Wireless, Battery-powered, Night Vision, Motion Detection, Two-way Audio
| Component | Specification |
|---|---|
| NVR Power Supply | 12V-2A |
| Network Cable Length | 1 meter |
| Wireless Range | Minimum of 3.3 feet (1 meter) from wireless devices |
Product Usage Instructions
Camera Overview:
The camera includes features such as Antenna, Lens, IR LEDs, Microphone,
Battery compartment, Power button, Battery charging port, Speaker, Charging
indicator.
- Antenna
- Lens
- Infrared (IR) LEDs
- Microphone
- Network Indicator
- Passive Infrared (PIR) Sensor
- White LEDs
- Angle Adjustment Screw
- Battery Release Button
- Power Button
- Speaker
- Battery Level Indicator
- Battery Mounting Screw
- Battery Charging Port
System Connection Plan
The diagram shows the camera connected to the router port and USB port,
with the NVR connected to HDMI/VGA and power supply.
NVR Overview:
The NVR features Antenna, RJ45 LAN Cable Connection, VGA Port,
USB Port, HDMI Port, Power button for system setup.
- Antenna
- RJ45 LAN Cable Connection
- VGA Connection
- USB Port
- HDMI Connection
- Power Button
Camera Installation
- Attach the mounting bracket securely to the camera.
- Use screws to attach the camera and mounting bracket to the desired location.
- Tighten the screws at the bottom of the camera’s battery compartment to secure the battery.
- Adjust the camera angle using a screwdriver and tighten the adjustment screw.
Installation Precautions
- Charge the camera battery fully before use.
- Do not disassemble the device.
- Install the camera where the lens is unobstructed.
- Avoid installing the camera in direct sunlight or near reflective surfaces.
- Install the camera away from children’s reach and moving vehicles.
- It is recommended to set the PIR angle of the camera greater than 10° to detect objects.
- Install the camera at least 3.3 feet (1 meter) away from wireless devices to avoid interference.
Creating an Account:
To begin using the system, create an account on the ZOSI Smart App for
Android/iOS devices.
ZOSI Smart App:
Scan the QR code provided to watch the instructional video for operating
the system.
AVSS Software:
For advanced system management and configuration, utilize the AVSS software
provided.
Troubleshooting
- Device is offline: Check router’s internet connection and the connection between the NVR and the router.
- Preview not available: If server is overloaded, restart the app and try again.
- No push notification: Ensure notification permissions are enabled in app settings and alarm function is activated in camera settings.
- No video: Verify if the hard drive is recognized and check the recording settings of the NVR.
For more detailed installation and operation guides, refer to the following links:
- Installation and Operation Guide for ZOSI Security Camera – Zosi Blog
- Installation and Operation Guide for ZOSI Security System – Zosi Blog
Contact information: service@zositech.com
Product certifications and standards compliance icons are displayed at the end of the document.
Frequently Asked Questions (FAQ)
What is the ideal viewing distance for motion detection?
The ideal viewing distance is between 2-10 meters (7-33ft) with an optimal viewing angle of above 10 degrees.
Should the PIR sensor be directed vertically towards moving objects?
It is not recommended to point the PIR sensor directly towards moving objects. The sensor should be positioned to detect motion within its specified range.
How do I install the camera?
Refer to the Installation of Camera section for detailed instructions on mounting the camera on various surfaces and adjusting its angle.
Where can I download the ZOSI Smart app?
The app can be downloaded from the App Store or Android Application Market, or by scanning the QR code provided in the Creating an Account section.
What should I do if I encounter issues with the AVSS software?
Ensure that the network configuration is completed, and visit the Zosi Help Center for support and software downloads.
What are the ideal conditions for installing the camera?
The camera should be installed away from direct sunlight, reflective surfaces, and should be placed at a height to avoid interference and to capture optimal coverage.
References
- Shop for Security Cameras & Surveillance System - Zosi
- Installation and Operation Guide for ZOSI Security Camera - Zosi Blog
- Installation and Operation Guide for ZOSI Security System - Zosi Blog
- Zosi Help Center Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>