ZOSI C291 4G Camera User Guide
- June 1, 2024
- ZOSI
Table of Contents
- ZOSI C291 4G Camera
- Product Information
- Product Usage Instructions
- What’s in the Box
- Camera Introduction
- Initial Use
- App/Client Installation
- Install the Camera
- Installation Distance, Height and Angle
- Installation Precautions
- FAQ
- Notification of Compliance
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZOSI C291 4G Camera
Specifications:
- Model: V6.I.01.Z
- Product: 4G LTE Camera
Product Information
The 4G LTE Camera is a versatile security camera that offers high-quality
video recording and monitoring capabilities. With features like infrared
lights, PIR sensor, and network
connectivity, this camera provides reliable surveillance for your home or
office.
Product Usage Instructions
Initial Setup:
To start using your camera, follow these steps:
- Insert your micro SD card into the camera. Note: SIM card is pre-installed and exclusive to the 4G version of the camera.
- Charge the device fully before initial use.
App/Client Installation:
Download and install the Zosi Smart App on your smartphone from the App
Store. Follow the instructions to register an account and add the camera to
the app.
Camera Installation:
A. Mounting on the Wall:
- Drill holes according to the mounting template and insert anchors.
- Install the mount base with screws.
- Adjust the camera direction using the Zosi App or Client.
B. Mounting on the Ceiling:
- Follow the same steps as mounting on the wall.
- Adjust the camera direction using the Zosi App or Client.
Frequently Asked Questions (FAQ):
Q: How can I check if my 4G camera is successfully connected to the
network?
A: Wait until the network indicator light turns blue, which indicates that the
camera has successfully connected to the network.
Quick Start Guide
4G LTE Camera
This guide will get you going with your camera. For more information, please visit our official website: www.zositech.com Support Email: service@zositech.com
The electronic user manual can be viewed on your mobile devices by scanning the QR code using a browser or camera.
What’s in the Box
NOTE: Actual accessories are subject to the model you purchased.
Camera Introduction
NOTE: Actual product may vary in appearance.
Initial Use
-
Insert your micro SD card.
NOTE: The SIM card is exclusive to the 4G version of the camera. SIM card is pre-intalled. If you are using your own SIM card, please follow the steps shown in the figure below.
-
Charging
NOTE: The device comes with a partial charge from the factory. Please fully charge before initial use.
| POWER Switch | Hold 3-5 seconds Turn ON/OFF |
|---|---|
| RESET Button | Hold 3-5 seconds Device Reset |
Network Status Indicator
Slow Flashing Red Light| Waiting for connection
Fast Flashing Red Light| Device’s connecting
Solid Blue Light| Connection succeeded
Charging Indicator
Solid Red Light| Camera’s charging
Solid Blue Light| Camera’s fully charged
App/Client Installation
Smartphone
Search Zosi Smart in App Store or scan the QR Code to download and install the
App. Follow the instructions to register an account.
Add Device
- Open Zosi Smart App and follow the prompts to register and log in.
- Tap “+” to add a device. Follow the in-app instructions to complete the network settings and addition of the device.
NOTE:
It takes a few minutes for the 4G camera to establish a network connection for
the first time. Wait until the network indicator light turns blue, indicating
that the camera has successfully connected to the network.
PC
- Download and install the AVSS client on your computer, and follow this guide to finish the installation.
- Official download link: https://www.zositech.com/pages/app
- Double-click the “AVSS” icon, choose your language, and log in.
- NOTE: It is recommended to log in with the Zosi Smart App account to avoid using multiple accounts. .
- Scan the QR code below to watch the AVSS operation video.
Install the Camera
NOTE:
Set up the network and add the camera to the App before installing the camera.
Mount the Camera to the Wall
- Drill holes according to the mounting template and insert the anchors.
- Install the mount base with screws.
- To adjust the camera direction, you may control the camera to pan and tilt via Zosi App or Client.
Mount the Camera to the Ceiling
- Drill holes according to the mounting template and insert the anchors.
- Install the mount base with screws.
- To adjust the camera direction, you may control the camera to pan and tilt via Zosi App or Client.
Installation Distance, Height and Angle
- Distance: Best accuracy for objects within 5-33ft (1.5-10 m).
- Angle: Tilt the camera down about 30°-60° from the horizontal position.
- Height: Install the camera 5-11.5ft (1.5-3.5m) above the ground.
Installation Precautions
- Do not face the camera to any light source.
- Do not point the camera at glass windows or reflective objects. Otherwise, it may result in poor image performance due to reflections from infrared LEDs, ambient lights or status lights.
- Do not mount the camera in shaded area, and point the camera towards a well-lit area. For better image quality, make sure the camera and the captured subject are at the same lighting conditions.
- It is recommended that the camera be installed as far away as possible from electronic devices such as microwaves, televisions, radio phones and baby monitors to prevent signal interference.
- It is recommended to clean the lens with a soft cloth from time to time. Do not expose the power port to water or moisture, or blocked by dirt or other things.
- Camera may work in extremely cold conditions as low as -20°C as it will produce heat when powered on. You may power the camera indoors for a few minutes before installing it outdoors. (Only for outdoor cameras)
FAQ
-
Q: Why is the 4G version of device offline?
- 4G cameras have a limit on data usage, exceeding the data plan might result in speed limitations or suspension of services.
- Remote power-cycling may sometimes cause signal fluctuations leading to network connectivity issues. Consider enabling the device’s network disconnection restart feature.
- Different mobile carriers have varying network coverage. Try using a SIM card from another carrier to compare network performance.
-
Q: No recording is found?
Check if the Micro SD card is damaged and if the date being searched for is valid. Ensure that the device’s system setting time is correct. -
Q: Why is the two-way audio not functioning?
- Please check whether App permissions are allowed while installing the App on your phone.
- Confirm the current network status of both the camera and mobile phone.
- Ensure the speaker volume of the intercom camera is not too low. Adjust the speaker volume as needed.
-
Q: Does the camera support motion detection and image capture?
- The camera automatically captures images when it detects people, cars, or any changes in the detected image.
- Users can also manually capture images using the Zosi Smart App.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including inference that. may cause undesired operation.
Simplified EU Declaration of Conformity
ZOSI declares that the device is in compliance with the essential requirements
and other relevant provisions if Directive 2014/53/EU.
Correct Disposal of this Product
This marking indicates that this product cannot be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal and promote the
sustainable reuse of material resources, please recycle it responsibly. To
return your used device, please visit the Return and Collection System or
contact the retailer from whom
the product was purchased. They can take this product away for environmentally
safe recycling.
NOTE:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
- This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. The device can be used in portable exposure conditions. This
equipment shall be installed and operated with minimum distance 20cm between
the radiator & body.
- www.zositech.com
- Support Email: service@zositech.com
- Facebook: https://www.facebook.com/ZosiTechnology/
- Whatsapp: +1-866-841-6932
- UK Whatsapp: +86 18675610962
- Responsible Party: Ansjer Electronics Co., Ltd
- Company name :Loocam Technology LLC
- Address: 2205 Hutton Dr, Unit 100, Carrollton TX 75006
- Tel: 657-223-3477
- E-mail: lavenderl@loocam.com
Copyright © 2024 ZOSI Technology Co., Ltd.
No part of this publication may be reproduced in any way without the written
permission of ZOSI. The information in this publication is believed to be
accurate in all respects. ZOSI assumes no responsibility for any consequences
resulting from their use. As our products require continuous improvement,ZOSI
reserves the right to modify product designs, specifications and prices without
notice and without any obligation. All rights reserved,and ZOSI reserves the
final interpretation right of this manual.
References
- Shop for Security Cameras & Surveillance System - Zosi
- stiftung elektro-altgeräte register
- ZOSI Smart App - Stay Connected to Your World, Anywhere – Zosi
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>