ZOSI C291 Wireless IP Camera User Guide
- June 1, 2024
- ZOSI
Table of Contents
ZOSI C291 Wireless IP Camera
Specifications :
- Model: V6.I.01.Z
- Product: Wireless IP Camera
- Support Email : service@zositech.com
- Website : www.zositech.com
- Wi-Fi : Supports 2.4GHz
Product Usage Instructions
Initial Setup
1. Insert your micro SD card into the camera.
2. Fully charge the device before initial use.
App/Client Installation
Search for Zosi Smart in App Store or scan the QR code to download and install the App. Follow the instructions to register an account.
Download and install the AVSS client on your computer from the official download link provided. Log in using your Zosi Smart App account.
Install the Camera
Mounting on Wall
- Drill holes according to the mounting template and insert the anchors.
- Install the mount base with screws.
- Adjust camera direction using Zosi App or Client.
Mounting on Ceiling
- Drill holes according to the mounting template and insert the anchors.
- Install the mount base with screws.
- Adjust camera direction using Zosi App or Client.
Note: Install the camera at a height between 5-11.5ft (1.5-3.5m) above the ground.
FAQ
- Q: Can I use a micro SD card with a capacity higher than what is recommended?
- A: It is recommended to use a micro SD card within the recommended capacity to ensure optimal performance and compatibility.
- Q: Does the camera support both Wi-Fi and Ethernet connection?
- A: The camera supports Wi-Fi connection only, specifically on the 2.4GHz frequency band. Ethernet connection is not supported.
What’s in the Box
NOTE : Actual accessories are subject to the model you purchased.
Camera Introduction
NOTE : Actual products may vary in appearance.
Initial Use
- Insert your micro SD card.
Charging
- NOTE: The device comes with a partial charge from the factory. Please fully charge the device before initial use.
POWER Switch: Hold 3-5 seconds Turn ON/OFF
RESET Button: Hold 3-5 seconds Device Reset
Network Status Indicator
- Slow Flashing Red Light : Waiting for connection
- Fast Flashing Red Light :”Device’s connecting
- Solid Blue Light : Connection succeeded
Charging Indicator
- Solid Red Light: Camera’s charging
- Solid Blue Light: The camera’s fully charged
App/Client Installation
Smartphone
Search Zosi Smart in App Store or scan the QR Code to download and install the App. Follow the instructions to register an account.
Add Device
- Open the Zosi Smart App and follow the prompts to register and log in.
- Tap “+” to add a device. Follow the in-app instructions to complete the network settings and addition of the device.
- NOTE : The Wi-Fi version of the camera only supports 2.4GHz Wi-Fi. Please select Wi-Fi without “5GHz”, and make sure the Wi-Fi name does not contain any special characters.
PC
Download and install the AVSS client on your computer, and follow this guide to finish the installation.
Official download link: https://www.zositech.com/pages/app
Double-click the “AVSS” icon, choose your language, and log in.
- NOTE : It is recommended to log in with the Zosi Smart App account to avoid using multiple accounts. .
Scan the QR code below to watch the AVSS operation video.
Install the Camera
- NOTE: Set up the network and add the camera to the App before installing the camera.
Mount the Camera to the Wall
- Drill holes according to the mounting template and insert the anchors.
- Install the mount base with screws.
- To adjust the camera direction, you may control the camera to pan and tilt via Zosi App or Client.
Mount the Camera to the Ceiling
- Drill holes according to the mounting template and insert the anchors.
- Install the mount base with screws.
- To adjust the camera direction, you may control the camera to pan and tilt via Zosi App or Client.
Installation Distance, Height, and Angle
- Distance: Best accuracy for objects within 5-33ft (1.5-10 m).
- Angle: Tilt the camera down about 30°-60° from the horizontal position.
- Height: Install the camera 5-11.5ft (1.5-3.5m) above the ground.
Installation Precautions
- Do not face the camera to any light source.
- Do not point the camera at glass windows or reflective objects. Otherwise, it may result in poor image performance due to reflections from infrared LEDs, ambient lights or status lights.
- It is recommended that the camera be installed as far away as possible from electronic devices such as microwaves, televisions, radio phones, and baby monitors to prevent signal interference.
- It is recommended to clean the lens with a soft cloth from time to time. Do not expose the power port to water or moisture, or blocked by dirt or other things.
- The camera may work in extremely cold conditions as low as -20°C as it will produce heat when powered on. You may power the camera indoors for a few minutes before installing it outdoors. (Only for outdoor cameras)
FAQ
Do not mount the camera in the
Why is the WiFi version of the device offline
Please verify that the Wi-Fi password entered during the camera pairing process is correct. If unsure, perform a reset and retry the pairing process. Verify that your current network is running on the 2.4GHz Wi-Fi frequency as this camera does not support 5GHz Wi-Fi. Check if the device is connected to the network, make sure the router is functioning properly to access the Internet and make sure automatic IP address assignment is enabled on the router
No recording is found?
Check if the Micro SD card is damaged and if the data being searched for is valid. Ensure that the device's system setting time is correct.
Why is the two-way audio not functioning
Please check whether App permissions are allowed while installing the App on your phone. Confirm the current network status of both the camera and mobile phone. Ensure the speaker volume of the intercom camera is not too low. Adjust the speaker volume as needed.
: Does the camera support motion detection and image capture
The camera automatically captures images when it detects people, cars, or any changes in the detected image. Users can also manually capture images using the Zosi Smart App.
shaded area, and point the camera towards a well-lit area. For better image quality, make sure the camera and the captured subject are at the same lighting conditions.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including the inference that. may cause undesired operation
Simplified EU Declaration of Conformity
ZOSI declares that the device is in compliance with the essential requirements and other relevant provisions if Directive 2014/53/EU.
Correct Disposal of this Product
This marking indicates that this product cannot be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling.
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
a minimum distance 20cm between the radiator & body.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- www.zositech.com
- Support Email : service@zositech.com
- Facebook: https://www.facebook.com/ZosiTechnology/
- Whatsapp: +1-866-841-6932
- UK Whatsapp : +86 18675610962
- Responsible Party :Ansjer Electronics Co., Ltd
- Company name :Loocam Technology LLC
- Address: 2205 Hutton Dr, Unit 100, Carrollton TX 75006
- Tel: 657-223-3477
- E-mail: lavenderl@loocam.com
Copyright © 2024 ZOSI Technology Co., Ltd.
No part of this publication may be reproduced in any way without the written permission of ZOSI. The information in this publication is believed to be accurate in all respects. ZOSI assumes no responsibility for any consequences resulting from their use. As our products require continuous improvement, ZOSI reserves the right to modify product designs, specifications and prices without notice and without any obligation. All rights reserved,and ZOSI reserves the final interpretation right of this manual
This guide will get you going with your camera. For more information, please visit our official
- website: www.zositech.com
- Support Email: service@zositech.com
The electronic user manual can be viewed on your mobile devices by scanning the QR code using a browser or camera.
References
- Shop for Security Cameras & Surveillance System – Zosi
- stiftung elektro-altgeräte register
- ZOSI Smart App - Stay Connected to Your World, Anywhere – Zosi
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>