brother HL‑L2305W Wireless Mono Laser Printer User Guide
- June 6, 2024
- Brother
Table of Contents
HL‑L2305W Wireless Mono Laser Printer
HLL2305W / HLL2315DW / HLL2340DW / HLL2360DN / HLL2360DW / HLL2361DN /
HLL2365DW / HLL2366DW
Quick Setup Guide
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions Center:
solutions.brother.com/manuals.
Version D ENG
Unpack the machine and check the components
A
Watch our FAQ Videos for help with setting up your Brother machine: solutions.brother.com/videos.
Drum Unit (Pre-installed)
B Inbox/Starter Toner
Cartridge
AC Power Cord (only for certain models)
Quick Setup Guide
CDROM
Product Safety Guide
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure. Manuals in Spanish for this model are
available on the enclosed CD-ROM. (USA only) Manuales en Español para este
modelo están disponibles en el CD-ROM incluido. (sólo en Estados Unidos)
NOTE:
· The components included in the box and the AC power plug may differ
depending on your country.
· The available connection interfaces vary depending on the model. · The
illustrations in this Quick Setup Guide are based on the HL-L2365DW. · You
must purchase the correct interface cable for the interface you want to use.
USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 2
meters (6 feet).
Network cable Use a straight-through Category 5 (or greater) twisted-pair
cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1 Remove the packing materials and install the toner cartridge
A
B
B
B
A Remove the orange part.
Remove the orange part.
A
2 Load paper in the paper tray
Adjust the paper guides.
3 Connect the power cord and turn on the machine
Back
Front
4 Select your language (Only for certain models)
1. Press or to select General Setup, and then press OK. 2. Press OK to select
Local Language. 3. Press or to select your language, and then press OK.
5 Connect the machine to your computer/mobile device
· Windows® PC with a CD-ROM drive, go to step 5A · Windows® PC without a CD-
ROM drive, go to step 5B · Macintosh, go to step 5B · Mobile device users with
a WPS/AOSSTM-supported access point/router, go to step 5C
5A
Configuration using the CD-ROM (Windows®)
NOTE:
If the Brother screen does not appear automatically, go to Computer (My
Computer). (For Windows® 8: click the (File Explorer) icon on the taskbar, and
then go to Computer.) Double-click the CD-ROM icon, and then double-click
start.exe.
Connection Type
For USB Connection
For Wired Network Connection
Connect a network cable first.
For Wireless Network Connection
We recommend preparing a USB cable to use temporarily during the wireless
setup.
Follow the on-screen instructions until the Connection Type screen appears.
Follow the on-screen instructions to continue installation.
Finish
NOTE:
If connection is unsuccessful, repeat this step.
Wireless Network Connection
5B
[Recommended] Select this option if you have a USB cable to use temporarily
for wireless setup.
Select this option if you do not have a USB cable.
NOTE:
If connection is unsuccessful, repeat this step.
Follow the on-screen instructions to continue installation.
Finish
For Network Users: Important Notice for Network Security The default Web Based Management password is located on the back of the machine and marked “Pwd”. We recommend immediately changing the default password to use network tools/utilities securely and to protect your machine from unauthorized access.
Configuration without using the CD-ROM (Windows® without CD-ROM drive or
Macintosh)
Download the full driver and software package from the Brother Solutions
Center. (For Windows®) solutions.brother.com/windows (For Macintosh)
solutions.brother.com/mac
After you download the driver and software package, follow the on-screen
instructions until the Connection Type screen appears. Refer to 5A
Configuration using the CD-ROM (Windows®).
5C
One-push wireless setup for mobile devices (Wireless models only)
If your wireless LAN access point/router supports automatic wireless (one-
push) setup (WPS/AOSSTM), you can set up your machine without using a
computer.
Press the WPS or AOSSTM button on your wireless LAN access point/router.
Press the WiFi button on your machine.
Print using your mobile device
Download “Brother iPrint&Scan” to start using your machine with mobile
devices.
solutions.brother.com/ips
Wireless setup is now complete.
NOTE:
Before you can use your machine with your mobile device, download “Brother
iPrint&Scan.”
Brother support web site http://support.brother.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>