3M 90545 Pro Protect Electronic Hearing Protector User Guide
- May 15, 2024
- 3M
Table of Contents
3M 90545 Pro Protect Electronic Hearing Protector
QUICK-START GUIDE
This Quick Start Guide is not a substitute for the User Instructions. Before
use, the wearer must read and understand the User Instructions.
POWER & VOLUME
- Press and hold the power button for 3 seconds to power the ON/OFF headset.
- Voice Assist will announce “Power ON” or “Power OFF.”
- Adjust the ambient volume by selecting one of the four levels by pressing the volume button.
- To mute the ambient volume, press and hold the volume button.
- While muted, press the volume button once to return to your last volume setting.
- Performance is best when the volume is set to the lowest level needed for conversation.
PAIR DEVICE FUNCTION
- Quickly double-tap the Bluetooth® button to enter pairing mode.
- You will hear “Bluetooth® pairing.”
- Make sure your Bluetooth® enabled device is scanning/searching for devices.
- Check your device to make sure it has discovered “3M Pro-Protect.”
- Select to connect to the hearing protector.
ONCE YOUR DEVICE IS PAIRED
- once contacted successfully, you will see you so that as pro-Protect, it will automatically link the next time you turn on the hearing protector.
INCOMING CALLS, MESSAGES, ALERTS & AUDIO PLAYBACK
- The Biuet the button ota call, press
- To reject a call and return to Bluetooth® from a “3M Pro-Protect” device, press and hold the Bluetooth® button.
- After disconnecting from the call, you will hear “Call terminated.”
NAVIGATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>