SINGCALL M5374 Wireless Caregiver Receiver User Manual
- June 15, 2024
- SINGCALL
Table of Contents
- Introduction
- Features
- Operation Guide
- Change the right tones
- Add a normal transmitter (the ring tones can be changed)
- Add a transmitter with fixed ring tone (Optional)
- Delete all transmitters
- Return to the first ring tone
- Delete all transmitters and back to factory defaults
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Wireless Caregiver Receiver
User Manual Eastway International (HK) Limited
Introduction
Wireless caregiver receiver, integrating with 32 different ring tones, adopts advanced wireless reception technology, high-quantity voice processing technology. The caregiver system is suitable for apartment, villa, nursing home, hospital, clinic, home and other places.
Features
- 32 available ring tones
- 5 levels of volume adjustment(including mute). In mute mode, the light will not flash
- Maximum decibel: 100d8
- Signal distance: 100 meters/328 ft (open space)
- Up to 20 transmitters can be added
- Different ring tones can be set to different transmitters
- Memory function
Operation Guide
Button mode:
Short press: Hold the button for less than 3 seconds Long press: Hold the
button for more than 3 seconds Plug the receiver into the AC power socket
(100-240V, 50-60Hz). The biue LED indicator light flashes twice. The receiver
beeps twice. It means the receiver has been successfully power on.
Change the right tones
Short press [ ] [ ] keys to choose different ring tones.
Short press [ ] key to set different volume levels. The receiver beeps twice
when the maximum or minimum volume is reached. (When it is powered on again,
the volume automatically returns to the maximum level).
Add a normal transmitter (the ring tones can be changed)
- Long press [ ] key, the blue LED light stays on steadily.
- Press the transmitter to send the signal to the receiver.
The receiver beeps twice and LED light flashes twice, which means the transmitter is added successfully. The receiver beeps once and LED light flashes once, which means the transmitter has been added before. The receiver beeps three times and LED light flashes three times, which means no transmitter can be added any more.
Add a transmitter with fixed ring tone (Optional)
- After selecting the ring tone to be played, long press and hold [ ] [ ] keys, the blue LED light stays on steadily.
- Press the transmitter to send the signal to the receiver.
The receiver beeps twice and LED light flashes twice, which means the transmitter is added successfully. The receiver beeps once and LED light flashes once, which means the transmitter has been added before. The receiver beeps three times and LED light flashes three times, which means no transmitter can be added any more.
Delete all transmitters
- Long press [ ] key, the blue LED light stays on steadily.
- Long press [ ] key again, the receiver beeps four times and LED light flashes four times. It means all transmitters are deleted successfully.
Note:
- Up to 20 transmitters can be added.
- When the transmitter is pressed, the receiver plays the set ring tones and the LED blue light flashes.
- During the adding transmitter process, if any key is pressed or there is no operation for 20 seconds, the adding mode will be exited.
Return to the first ring tone
Note: If the transmitter sets to fixed ring tone before, it cannot return to the first ring tone.
- Unplug the receiver
- Long Press and hold [ ] key and plug the receiver into the power socket. The receiver beeps five times slowly and the LED light flashes rapidly. It means the ring tone returns to the first one but all transmitters will not be deleted.
Delete all transmitters and back to factory defaults
- Unplug the receiver
- Long Press and hold [ ] key and plug the receiver into the power socket. The receiver beeps ten times slowly and the LED light flashes rapidly. It means the ring tone returns to the first one and all transmitters are deleted. The receiver is back to factory defaults.
www.singcall.com
Email: sales@singcall.com
FCC declaration of conformity: This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>