hansgrohe TALIS S2 Concealed Lever Basin Mixer Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe TALIS S2 Concealed Lever Basin Mixer
Product Information
The product is a shower system that can be used for bathing, hygienic and body cleansing purposes. The product has a hot water limiter, and the hot and cold supplies must be of equal pressures. The recommended operating pressure for the product is 1.6 MPa, with a maximum operating pressure of 1 MPa. The product has spare parts available, and cleaning instructions are provided in an enclosed brochure.
Product Usage Instructions
When installing the product, gloves should be worn to prevent crushing and cutting injuries. To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous flow water heater. Do not use silicone containing acetic acid. To use the product, turn on the hot and cold water supplies to equal pressures. The flow diagram can be found on page 34 for reference. The product can be operated for bathing, hygienic and body cleansing purposes. To clean the product, refer to the enclosed brochure for instructions. To replace any spare parts, refer to page 36 for information. For more specific installation instructions, refer to page 31 for details.
Assembly
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or
- if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
- Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters
- if the flow pressure is at least 0,15 MPa.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp: 65°C
Symbol Description
-
Hot water limiter (see page 33)
To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous-flow water heater.
-
Do not use silicone containing acetic acid!
-
Dimensions (see page 34)
-
Flow diagram (see page 34)
- with EcoSmart®
- without EcoSmart®
-
Spare parts (see page 36)
-
Operation (see page 35)
-
Cleaning see enclosed brochure.
Documents / Resources
|
hansgrohe TALIS S2 Concealed Lever Basin
Mixer
[pdf] Instruction Manual
31618000, 31000XXX, 31003XXX, 31162000, 31163000, TALIS S2 Concealed Lever
Basin Mixer, TALIS S2, TALIS S2 Lever Basin Mixer, Concealed Lever Basin
Mixer, Lever Basin Mixer, Concealed Lever Mixer, Basin Mixer, Mixer
---|---